{"title":"AFM\/DFM\/VCM Disablers","description":"\u003cp\u003eShop vehicle-specific AFM, DFM and VCM disablers for compatible GM and Honda applications. These electronic modules are selected by make, model, year, engine and connector to influence cylinder-deactivation behavior through the listed factory interface.\u003c\/p\u003e\u003cp\u003eReview the fitment rows and product notes before ordering. Each listing explains the application, connection point, expected behavior and limits so you can choose an AFM disabler, DFM disabler or VCM module with the correct vehicle match.\u003c\/p\u003e","products":[{"product_id":"afm-dfm-vcm-disabler-chevrolet-silverado-1500-2007-2018-afm-dfm-disabler","title":"Chevrolet Silverado 1500 2007-2018 4.3L V6 \/ 5.3L \/ 6.0L V8 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2007–2018 Chevrolet Silverado 1500. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007–2013 Chevrolet Silverado 1500: 5.3L V8 \/ 6.0L V8\u003c\/li\u003e\n\u003cli\u003e2014–2018 Chevrolet Silverado 1500: 4.3L V6 \/ 5.3L V8 \/ 6.0L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor reference, these are the AFM-equipped GM engine codes that match the years and displacements above:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLY5 (5.3L, 2007–2009, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLC9 (5.3L, 2007–2011, VIN 8th digit \"3\")\u003c\/li\u003e\n\u003cli\u003eLMG (5.3L, 2007–2014, VIN 8th digit \"0\")\u003c\/li\u003e\n\u003cli\u003eL76 (6.0L, 2007–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\n\u003cli\u003eLFA (6.0L, 2008–2009, VIN 8th digit \"5\")\u003c\/li\u003e\n\u003cli\u003eLZ1 (6.0L, 2010–2013, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLV3 (4.3L, 2014–2018)\u003c\/li\u003e\n\u003cli\u003eL83 (5.3L, 2014–2018, VIN 8th digit \"C\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. Check your code against both lists before you buy.\u003c\/p\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eOn AFM V8 engines, the computer shuts off fuel and holds the valves closed on cylinders 1, 7, 6 and 4 when the load is light, so the engine runs as a V4. It does this through special collapsible lifters on those cylinders, fed by oil-pressure solenoids. When you ask for more power, the lifters lock again and all eight cylinders fire. GM describes this behavior in its service bulletin on AFM and DFM operation.\u003c\/p\u003e\u003cp\u003eGM's 4.3L V6 (RPO LV3) uses the same idea on two cylinders: cylinders 3 and 6 are deactivated at light load, so the engine runs on four. On V8s, AFM drops cylinders 1, 7, 6 and 4. In both cases oil-pressure solenoids switch special lifters into a collapsed state and fuel to those cylinders is cut.\u003c\/p\u003e\u003cp\u003eFor the 2019 redesign of the Silverado 1500 and Sierra 1500, GM introduced Dynamic Fuel Management on the 5.3L L84 and 6.2L L87, which can run on 17 different cylinder patterns. That is a different system from the AFM covered by this listing.\u003c\/p\u003e\u003ch2\u003eThe first drive\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eHow this differs from an AFM delete kit\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eWhy owners disable it\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2018 Chevrolet Silverado 1500).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, LMG, L83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, L83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, L83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, L83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, L83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLY5\u003c\/strong\u003e: iron-block 5.3L Vortec used in 2007–2009 trucks and SUVs, without variable valve timing or flex-fuel capability. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLC9\u003c\/strong\u003e: aluminum-block 5.3L flex-fuel (E85-capable) truck and SUV engine, with variable valve timing added from 2010. VIN engine digit \"3\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLMG\u003c\/strong\u003e: 5.3L flex-fuel truck and SUV engine, with variable valve timing from 2010. VIN engine digit \"0\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFA\u003c\/strong\u003e: 6.0L V8 used in the Two-Mode Hybrid trucks and SUVs, with variable valve timing. VIN engine digit \"5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLZ1\u003c\/strong\u003e: 6.0L hybrid V8 for 2010–2013 Two-Mode Hybrid models, flex-fuel capable with variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLV3\u003c\/strong\u003e: 4.3L EcoTec3 V6 with direct injection, the base engine in the 2014–2018 Silverado 1500 and Sierra 1500.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL83\u003c\/strong\u003e: 5.3L EcoTec3 V8 with direct injection, variable valve timing and flex-fuel capability. VIN engine digit \"C\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePlatform and engine notes\u003c\/h2\u003e\u003cp\u003eTwo platform generations are involved here. GMT900 trucks and SUVs (from the 2007 model year) used Gen IV small-block V8s, while K2XX models (2014-on pickups, 2015-on SUVs) switched to EcoTec3 engines with direct injection. AFM appears in both, but not on every engine in either, so match the RPO code.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLY5\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003eiron block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLC9\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1 or 9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLMG\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1\u003c\/td\u003e\n\u003ctd\u003eAFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLFA\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLZ1\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLV3\u003c\/td\u003e\n\u003ctd\u003e4.3L\u003c\/td\u003e\n\u003ctd\u003e285 hp\u003c\/td\u003e\n\u003ctd\u003e305 lb-ft\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eV6, AFM, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e355–376 hp\u003c\/td\u003e\n\u003ctd\u003e383–416 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Silverado 1500?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Silverado 1500 has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Silverado 1500 years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Silverado 1500 2007–2018 with 4.3L V6, 5.3L V8, 6.0L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493781254516,"sku":"RC-AFM-DFM-01-01","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-01-1.jpg?v=1793172133"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-equinox-sport-2008-2009-afm-dfm-disabler","title":"Chevrolet Equinox Sport 2008-2009 3.6L V6 AFM\/DFM Disable","description":"\u003cp\u003eFits the 2008–2009 Chevrolet Equinox Sport. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2008–2009 Chevrolet Equinox Sport: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eA Chevrolet Equinox Sport with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2008–2009 Chevrolet Equinox Sport).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eEquinox Sport\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eEquinox Sport\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Equinox Sport?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Equinox Sport years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Equinox Sport 2008–2009 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Equinox Sport has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493781582196,"sku":"RC-AFM-DFM-01-02","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-02-1.jpg?v=1793172140"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-ss-2014-2018-afm-dfm-disabler","title":"Chevrolet SS 2014-2018 6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2014–2018 Chevrolet SS. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2014–2018 Chevrolet SS: 6.2L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eHow this differs from an AFM delete kit\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2014–2018 Chevrolet SS).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eEngine specifications\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLS3\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e425–436 hp\u003c\/td\u003e\n\u003ctd\u003e424–428 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.70:1\u003c\/td\u003e\n\u003ctd\u003eno AFM\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eGeneration notes\u003c\/h2\u003e\u003cp\u003eThe Chevrolet SS sedan, sold in the US for the 2014–2017 model years, uses the 6.2L LS3. GM's engine tables list the LS3 without AFM, so send the VIN to support before ordering for an SS.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eWhich Chevrolet SS years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet SS 2014–2018 with 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet SS?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet SS has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493781713268,"sku":"RC-AFM-DFM-01-03","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-03-1.jpg?v=1793172151"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-tahoe-2007-2018-afm-dfm-disabler","title":"Chevrolet Tahoe 2007-2018 5.3L\/6.0L\/6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2007–2018 Chevrolet Tahoe: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007–2009 Chevrolet Tahoe: 5.3L V8 \/ 6.0L V8\u003c\/li\u003e\n\u003cli\u003e2010–2014 Chevrolet Tahoe: 5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2015–2017 Chevrolet Tahoe: 5.3L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2018 Chevrolet Tahoe: 5.3L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor reference, these are the AFM-equipped GM engine codes that match the years and displacements above:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLY5 (5.3L, 2007–2009, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLC9 (5.3L, 2007–2011, VIN 8th digit \"3\")\u003c\/li\u003e\n\u003cli\u003eLMG (5.3L, 2007–2014, VIN 8th digit \"0\")\u003c\/li\u003e\n\u003cli\u003eL76 (6.0L, 2007–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\n\u003cli\u003eLFA (6.0L, 2008–2009, VIN 8th digit \"5\")\u003c\/li\u003e\n\u003cli\u003eLZ1 (6.0L, 2010–2013, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eL83 (5.3L, 2014–2018, VIN 8th digit \"C\")\u003c\/li\u003e\n\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. If your RPO list shows one of those codes, contact us before ordering.\u003c\/p\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003cp\u003eGM replaced AFM with Dynamic Fuel Management (DFM) on the 5.3L L84 and 6.2L L87 starting with the 2019 Silverado 1500 and Sierra 1500. The engines covered here use the earlier AFM design.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2018 Chevrolet Tahoe).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, L83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eEngine specifications\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLY5\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003eiron block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLC9\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1 or 9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLMG\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1\u003c\/td\u003e\n\u003ctd\u003eAFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLFA\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLZ1\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e355–376 hp\u003c\/td\u003e\n\u003ctd\u003e383–416 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eWhich 6.2L engines have AFM\u003c\/h2\u003e\u003cp\u003eGM's 6.2L truck V8 changed three times in the GMT900 years. The L92 debuted in the 2007 Cadillac Escalade; engines built before April 1, 2006 carried AFM hardware that was never switched on, and later ones had none. For 2009 the engine became flex-fuel as the L9H, still without AFM. For 2010 GM added Active Fuel Management, creating the L94 used in the Escalade and Yukon Denali models. The 2007–2013 Sierra 1500 Denali is listed with the L92\/L9H family rather than the L94. From 2014 on, the trucks use the EcoTec3 6.2L L86, which has AFM.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLY5\u003c\/strong\u003e: iron-block 5.3L Vortec used in 2007–2009 trucks and SUVs, without variable valve timing or flex-fuel capability. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLC9\u003c\/strong\u003e: aluminum-block 5.3L flex-fuel (E85-capable) truck and SUV engine, with variable valve timing added from 2010. VIN engine digit \"3\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLMG\u003c\/strong\u003e: 5.3L flex-fuel truck and SUV engine, with variable valve timing from 2010. VIN engine digit \"0\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFA\u003c\/strong\u003e: 6.0L V8 used in the Two-Mode Hybrid trucks and SUVs, with variable valve timing. VIN engine digit \"5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLZ1\u003c\/strong\u003e: 6.0L hybrid V8 for 2010–2013 Two-Mode Hybrid models, flex-fuel capable with variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL83\u003c\/strong\u003e: 5.3L EcoTec3 V8 with direct injection, variable valve timing and flex-fuel capability. VIN engine digit \"C\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Tahoe?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Tahoe years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Tahoe 2007–2018 with 5.3L V8, 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Tahoe has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493781778804,"sku":"RC-AFM-DFM-01-04","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-04-1.jpg?v=1793172165"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-impala-2006-2009-afm-dfm-disabler","title":"Chevrolet Impala 2006-2009 5.3L V8 \/ 2007-2008 3.9L V6 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2006–2009 Chevrolet Impala. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2006 Chevrolet Impala: 5.3L V8\u003c\/li\u003e\n\u003cli\u003e2007–2009 Chevrolet Impala: 3.9L V6 \/ 5.3L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGM engine codes with AFM that line up with these years and displacements:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLS4 (5.3L, 2005–2009, VIN 8th digit \"C\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2006–2009 Chevrolet Impala).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eImpala\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eImpala\u003c\/td\u003e\n\u003ctd\u003e3.9L V6 \/ 5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eImpala\u003c\/td\u003e\n\u003ctd\u003e3.9L V6 \/ 5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eImpala\u003c\/td\u003e\n\u003ctd\u003e3.9L V6 \/ 5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLS4\u003c\/strong\u003e: 5.3L V8 mounted transversely in front-drive cars such as the Impala SS, Monte Carlo SS and Grand Prix GXP. VIN engine digit \"C\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRead codes first; repair existing misfire or lifter faults before relying on the module.\u003c\/li\u003e\n\u003cli\u003eTop up the oil to the full mark with the correct grade.\u003c\/li\u003e\n\u003cli\u003eIgnition off.\u003c\/li\u003e\n\u003cli\u003eFind the OBD-II port under the dash.\u003c\/li\u003e\n\u003cli\u003eSeat the module fully and keep it away from the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eTest at light cruise and check that the reduced-cylinder mode no longer appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e300–303 hp\u003c\/td\u003e\n\u003ctd\u003e323 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, front-wheel drive\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Impala years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Impala 2006–2009 with 3.9L V6, 5.3L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Impala?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Impala has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493781811572,"sku":"RC-AFM-DFM-01-05","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-05-1.jpg?v=1793172173"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-malibu-2006-2012-afm-dfm-disabler","title":"Chevrolet Malibu 2008-2012 3.6L V6 \u0026 Malibu\/Maxx 2006-2007 3.9L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2006 Chevrolet Malibu Maxx and 2007–2012 Chevrolet Malibu: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2006 Chevrolet Malibu Maxx: 3.9L V6\u003c\/li\u003e\n\u003cli\u003e2007 Chevrolet Malibu: 3.9L V6\u003c\/li\u003e\n\u003cli\u003e2008–2009 Chevrolet Malibu: 3.6L V6 \/ 3.9L V6\u003c\/li\u003e\n\u003cli\u003e2010–2012 Chevrolet Malibu: 3.6L V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eThe first drive\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eWhy owners disable it\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2006 Chevrolet Malibu Maxx and 2007–2012 Chevrolet Malibu).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu Maxx\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eGM built several 3.6L V6 versions, and only some have AFM. The LGX (2016-on Camaro) and the LGZ (2017-on Colorado and Canyon) both use direct injection, variable valve timing and Active Fuel Management, running on four cylinders at light load (cylinders 2 and 5 are shut down on the LGX). The LFX, used in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave do not have AFM. Your RPO code settles it.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Malibu Maxx and Chevrolet Malibu has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Malibu Maxx and Chevrolet Malibu?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Malibu Maxx and Chevrolet Malibu years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Malibu Maxx 2006; Chevrolet Malibu 2007–2012 with 3.6L V6, 3.9L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493781844340,"sku":"RC-AFM-DFM-01-06","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-06-1.jpg?v=1793172180"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-monte-carlo-2006-2007-afm-dfm-disabler","title":"Chevrolet Monte Carlo 2006-2007 5.3L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2006–2008 Chevrolet Monte Carlo: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2006–2008 Chevrolet Monte Carlo: 5.3L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLS4 (5.3L, 2005–2009, VIN 8th digit \"C\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eIf the engine already has symptoms\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eHow this differs from an AFM delete kit\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2006–2008 Chevrolet Monte Carlo).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eEngine specifications\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e300–303 hp\u003c\/td\u003e\n\u003ctd\u003e323 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, front-wheel drive\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLS4\u003c\/strong\u003e: 5.3L V8 mounted transversely in front-drive cars such as the Impala SS, Monte Carlo SS and Grand Prix GXP. VIN engine digit \"C\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhich Chevrolet Monte Carlo years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Monte Carlo 2006–2008 with 5.3L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Monte Carlo?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Monte Carlo has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493781942644,"sku":"RC-AFM-DFM-01-07","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-07-1.jpg?v=1793172191"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-trailblazer-2005-2009-afm-dfm-disabler","title":"Chevrolet Trailblazer 2005-2009 5.3L V8 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2005–2009 Chevrolet Trailblazer. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2005–2009 Chevrolet Trailblazer: 5.3L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLH6 (5.3L, 2005–2009, VIN 8th digit \"M\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eIf the engine already has symptoms\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eCheck before ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2005–2009 Chevrolet Trailblazer).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eLH6 background\u003c\/h2\u003e\u003cp\u003eBesides the TrailBlazer and Envoy, the LH6 went into the Buick Rainier, Saab 9-7X and Isuzu Ascender, and into some 2007–2009 Silverado 1500 and Sierra 1500 pickups. It replaced the Gen III LM4 for 2005 and was the first Generation IV truck V8 to go into production.\u003c\/p\u003e\u003ch2\u003ePlatform and engine notes\u003c\/h2\u003e\u003cp\u003eThe 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV were the first GM vehicles sold with Displacement on Demand, using the 5.3L V8. The 5.3L LH6 in these midsize SUVs carried cylinder deactivation through the 2009 model year, when the line ended.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLH6\u003c\/strong\u003e: aluminum-block 5.3L V8 used in midsize SUVs, one of the first GM engines with Displacement on Demand. VIN engine digit \"M\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e300–315 hp\u003c\/td\u003e\n\u003ctd\u003e330–338 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhich Chevrolet Trailblazer years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Trailblazer 2005–2009 with 5.3L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Trailblazer has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Trailblazer?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493782729076,"sku":"RC-AFM-DFM-01-08","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-08-1.jpg?v=1793172201"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-suburban-2007-2018-afm-dfm-disabler","title":"Chevrolet Suburban 2007-2018 4.3L\/5.3L\/6.0L\/6.2L V6\/V8 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2007–2018 Chevrolet Suburban. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007–2009 Chevrolet Suburban: 5.3L V8 \/ 6.0L V8\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Suburban: 5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2014 Chevrolet Suburban: 4.3L V6 \/ 5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2015–2017 Chevrolet Suburban: 4.3L V6 \/ 5.3L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2018 Chevrolet Suburban: 4.3L V6 \/ 5.3L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLY5 (5.3L, 2007–2009, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLC9 (5.3L, 2007–2011, VIN 8th digit \"3\")\u003c\/li\u003e\n\u003cli\u003eLMG (5.3L, 2007–2014, VIN 8th digit \"0\")\u003c\/li\u003e\n\u003cli\u003eL76 (6.0L, 2007–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\n\u003cli\u003eLFA (6.0L, 2008–2009, VIN 8th digit \"5\")\u003c\/li\u003e\n\u003cli\u003eLZ1 (6.0L, 2010–2013, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eL83 (5.3L, 2014–2018, VIN 8th digit \"C\")\u003c\/li\u003e\n\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. Check your code against both lists before you buy.\u003c\/p\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003cp\u003eGM's 4.3L V6 (RPO LV3) uses the same idea on two cylinders: cylinders 3 and 6 are deactivated at light load, so the engine runs on four. On V8s, AFM drops cylinders 1, 7, 6 and 4. In both cases oil-pressure solenoids switch special lifters into a collapsed state and fuel to those cylinders is cut.\u003c\/p\u003e\u003cp\u003eGM replaced AFM with Dynamic Fuel Management (DFM) on the 5.3L L84 and 6.2L L87 starting with the 2019 Silverado 1500 and Sierra 1500. The engines covered here use the earlier AFM design.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eA Chevrolet Suburban with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2018 Chevrolet Suburban).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, L83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8\u003c\/td\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003ch2\u003e6.2L engine history\u003c\/h2\u003e\u003cp\u003eGM's 6.2L truck V8 changed three times in the GMT900 years. The L92 debuted in the 2007 Cadillac Escalade; engines built before April 1, 2006 carried AFM hardware that was never switched on, and later ones had none. For 2009 the engine became flex-fuel as the L9H, still without AFM. For 2010 GM added Active Fuel Management, creating the L94 used in the Escalade and Yukon Denali models. The 2007–2013 Sierra 1500 Denali is listed with the L92\/L9H family rather than the L94. From 2014 on, the trucks use the EcoTec3 6.2L L86, which has AFM.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGeneration notes\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLY5\u003c\/strong\u003e: iron-block 5.3L Vortec used in 2007–2009 trucks and SUVs, without variable valve timing or flex-fuel capability. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLC9\u003c\/strong\u003e: aluminum-block 5.3L flex-fuel (E85-capable) truck and SUV engine, with variable valve timing added from 2010. VIN engine digit \"3\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLMG\u003c\/strong\u003e: 5.3L flex-fuel truck and SUV engine, with variable valve timing from 2010. VIN engine digit \"0\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFA\u003c\/strong\u003e: 6.0L V8 used in the Two-Mode Hybrid trucks and SUVs, with variable valve timing. VIN engine digit \"5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLZ1\u003c\/strong\u003e: 6.0L hybrid V8 for 2010–2013 Two-Mode Hybrid models, flex-fuel capable with variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL83\u003c\/strong\u003e: 5.3L EcoTec3 V8 with direct injection, variable valve timing and flex-fuel capability. VIN engine digit \"C\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLY5\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003eiron block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLC9\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1 or 9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLMG\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1\u003c\/td\u003e\n\u003ctd\u003eAFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLFA\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLZ1\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e355–376 hp\u003c\/td\u003e\n\u003ctd\u003e383–416 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Suburban has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Suburban?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Suburban years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Suburban 2007–2018 with 4.3L V6, 5.3L V8, 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493782794612,"sku":"RC-AFM-DFM-01-09","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-09-1.jpg?v=1793172212"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-corvette-2012-2019-traverse-2018-afm-dfm-disabler","title":"Chevrolet Corvette 2012-2019 6.2L V8 \/ Traverse 2018 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2012–2019 Chevrolet Corvette and 2018 Chevrolet Traverse. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2012–2019 Chevrolet Corvette: 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2018 Chevrolet Traverse: 3.6L V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLT1 (6.2L, 2014–2019, VIN 8th digit \"7\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2012–2019 Chevrolet Corvette and 2018 Chevrolet Traverse).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTraverse\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eGM built several 3.6L V6 versions, and only some have AFM. The LGX (2016-on Camaro) and the LGZ (2017-on Colorado and Canyon) both use direct injection, variable valve timing and Active Fuel Management, running on four cylinders at light load (cylinders 2 and 5 are shut down on the LGX). The LFX, used in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave do not have AFM. Your RPO code settles it.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e455–460 hp\u003c\/td\u003e\n\u003ctd\u003e455–465 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eThe C7 Corvette (2014–2019) uses the 6.2L LT1 with Active Fuel Management. The C6 Corvette through 2013 used the LS3 and LS7, which GM's engine tables list without AFM, so earlier cars have no cylinder deactivation for the module to manage.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLT1\u003c\/strong\u003e: 6.2L Gen V V8 with direct injection and variable valve timing. VIN engine digit \"7\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Corvette and Chevrolet Traverse?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Corvette and Chevrolet Traverse years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Corvette 2012–2019; Chevrolet Traverse 2018 with 3.6L V6, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Corvette and Chevrolet Traverse has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493782827380,"sku":"RC-AFM-DFM-01-10","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-10-1.jpg?v=1793172226"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-colorado-2015-2019-afm-dfm-disabler","title":"Chevrolet Colorado 2015-2019 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2015–2019 Chevrolet Colorado. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2015–2019 Chevrolet Colorado: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eGM's cylinder deactivation saves fuel by running the engine on fewer cylinders during light-load cruising. The switch is controlled by the engine computer. The module talks to the vehicle through the OBD-II port and keeps that reduced-cylinder mode from being selected, so all cylinders stay active.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eCheck before ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2015–2019 Chevrolet Colorado).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eLGZ\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eLGZ\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eLGZ\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLGZ\u003c\/td\u003e\n\u003ctd\u003e3.6L\u003c\/td\u003e\n\u003ctd\u003e308 hp\u003c\/td\u003e\n\u003ctd\u003e275 lb-ft\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eV6, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eWhich 3.6L V6 engines have AFM\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eOil and transmission on the LGZ\u003c\/h2\u003e\u003cp\u003eOn the 2017-on Colorado and Canyon, the 3.6L LGZ is paired with the Hydra-Matic 8L45 eight-speed automatic. GM TechLink notes that the engine uses a dual-pressure, variable-displacement vane oil pump inside the oil pan and calls for dexos1 5W-30 oil. Because AFM is oil-pressure operated, using that oil grade matters with or without the module.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Colorado years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Colorado 2015–2019 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Colorado?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Colorado has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493782860148,"sku":"RC-AFM-DFM-01-11","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-11-1.jpg?v=1793172235"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-camaro-2010-2018-afm-dfm-disabler","title":"Chevrolet Camaro 2010-2018 6.2L V8 \/ 2016-2018 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2010–2018 Chevrolet Camaro. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2010–2015 Chevrolet Camaro: 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2016–2018 Chevrolet Camaro: 6.2L V8 \/ 3.6L V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eL99 (6.2L, 2010–2015, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLT1 (6.2L, 2016–2018, VIN 8th digit \"7\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003ch2\u003eWhy owners disable it\u003c\/h2\u003e\u003cp\u003eA Chevrolet Camaro with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2010–2018 Chevrolet Camaro).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL99\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL99\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL99\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL99\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL99\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL99\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e6.2L V8 \/ 3.6L V6\u003c\/td\u003e\n\u003ctd\u003eLT1, LGX\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e6.2L V8 \/ 3.6L V6\u003c\/td\u003e\n\u003ctd\u003eLT1, LGX\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e6.2L V8 \/ 3.6L V6\u003c\/td\u003e\n\u003ctd\u003eLT1, LGX\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eEngine specifications\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eL99\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e400 hp\u003c\/td\u003e\n\u003ctd\u003e410 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e455–460 hp\u003c\/td\u003e\n\u003ctd\u003e455–465 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLGX\u003c\/td\u003e\n\u003ctd\u003e3.6L\u003c\/td\u003e\n\u003ctd\u003e335 hp (Camaro)\u003c\/td\u003e\n\u003ctd\u003e284 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.5:1\u003c\/td\u003e\n\u003ctd\u003eV6, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout these engine codes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eL99\u003c\/strong\u003e: 6.2L V8 used only with the automatic transmission in the 2010–2015 Camaro SS. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLT1\u003c\/strong\u003e: 6.2L Gen V V8 with direct injection and variable valve timing. VIN engine digit \"7\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGM 3.6L V6 engines and AFM\u003c\/h2\u003e\u003cp\u003eFor V6 applications, the engine code matters more than the displacement. AFM is part of the LGX (2016-on Camaro, which drops cylinders 2 and 5) and the LGZ (2017-on Colorado and Canyon). The LFX that preceded them, including in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave run on all six cylinders all the time and are not candidates for this module.\u003c\/p\u003e\u003ch2\u003eCamaro SS: manual or automatic\u003c\/h2\u003e\u003cp\u003eIn the 2010–2015 Camaro SS, only cars with the automatic transmission got the L99 V8 with AFM. Manual-transmission SS models use the LS3, which has no cylinder deactivation, so the module does nothing on them. Check the transmission and engine code before ordering.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Camaro has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Camaro?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Camaro years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Camaro 2010–2018 with 3.6L V6, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493783089524,"sku":"RC-AFM-DFM-01-12","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-12-1.jpg?v=1793172244"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-caprice-ppv-2011-2019-afm-dfm-disabler","title":"Chevrolet Caprice PPV 2011-2019 6.0L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2011–2019 Chevrolet Caprice PPV. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2011–2019 Chevrolet Caprice PPV: 6.0L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM engine codes with AFM that line up with these years and displacements:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eL77 (6.0L, 2011–2017, VIN 8th digit \"2\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eOn AFM V8 engines, the computer shuts off fuel and holds the valves closed on cylinders 1, 7, 6 and 4 when the load is light, so the engine runs as a V4. It does this through special collapsible lifters on those cylinders, fed by oil-pressure solenoids. When you ask for more power, the lifters lock again and all eight cylinders fire. GM describes this behavior in its service bulletin on AFM and DFM operation.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eWhy owners disable it\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2011–2019 Chevrolet Caprice PPV).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice PPV\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eL77\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice PPV\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eL77\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice PPV\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eL77\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice PPV\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eL77\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice PPV\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eL77\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice PPV\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eL77\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice PPV\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eL77\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice PPV\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice PPV\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRead codes first; repair existing misfire or lifter faults before relying on the module.\u003c\/li\u003e\n\u003cli\u003eTop up the oil to the full mark with the correct grade.\u003c\/li\u003e\n\u003cli\u003eIgnition off.\u003c\/li\u003e\n\u003cli\u003eFind the OBD-II port under the dash.\u003c\/li\u003e\n\u003cli\u003eSeat the module fully and keep it away from the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eTest at light cruise and check that the reduced-cylinder mode no longer appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eEngine specifications\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL77\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e349–362 hp\u003c\/td\u003e\n\u003ctd\u003e381–391 lb-ft\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eAFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eL77\u003c\/strong\u003e: 6.0L flex-fuel V8 used in the Chevrolet Caprice PPV and the Holden-built cars. VIN engine digit \"2\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Caprice PPV?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Caprice PPV has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Caprice PPV years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Caprice PPV 2011–2019 with 6.0L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493783122292,"sku":"RC-AFM-DFM-01-13","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-13-1.jpg?v=1793172257"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-avalanche-2007-2013-afm-dfm-disabler","title":"Chevrolet Avalanche 2007-2013 5.3L V8 \/ 2007-2009 6.0L V8 \/ 2010-2013 6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2007–2013 Chevrolet Avalanche: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007–2009 Chevrolet Avalanche: 5.3L V8 \/ 6.0L V8\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Avalanche: 5.3L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGM engine codes with AFM that line up with these years and displacements:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLY5 (5.3L, 2007–2009, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLC9 (5.3L, 2007–2011, VIN 8th digit \"3\")\u003c\/li\u003e\n\u003cli\u003eLMG (5.3L, 2007–2014, VIN 8th digit \"0\")\u003c\/li\u003e\n\u003cli\u003eL76 (6.0L, 2007–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\n\u003cli\u003eLFA (6.0L, 2008–2009, VIN 8th digit \"5\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. If your RPO list shows one of those codes, contact us before ordering.\u003c\/p\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2013 Chevrolet Avalanche).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eAbout these engine codes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLY5\u003c\/strong\u003e: iron-block 5.3L Vortec used in 2007–2009 trucks and SUVs, without variable valve timing or flex-fuel capability. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLC9\u003c\/strong\u003e: aluminum-block 5.3L flex-fuel (E85-capable) truck and SUV engine, with variable valve timing added from 2010. VIN engine digit \"3\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLMG\u003c\/strong\u003e: 5.3L flex-fuel truck and SUV engine, with variable valve timing from 2010. VIN engine digit \"0\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFA\u003c\/strong\u003e: 6.0L V8 used in the Two-Mode Hybrid trucks and SUVs, with variable valve timing. VIN engine digit \"5\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eTwo platform generations are involved here. GMT900 trucks and SUVs (from the 2007 model year) used Gen IV small-block V8s, while K2XX models (2014-on pickups, 2015-on SUVs) switched to EcoTec3 engines with direct injection. AFM appears in both, but not on every engine in either, so match the RPO code.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLY5\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003eiron block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLC9\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1 or 9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLMG\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1\u003c\/td\u003e\n\u003ctd\u003eAFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLFA\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe 6.2L V8 story: L92, L9H and L94\u003c\/h2\u003e\u003cp\u003eNot every GMT900 6.2L has cylinder deactivation. The L92 (2007–2008 Escalade, Yukon Denali and related models) had no working AFM, and the 2009 flex-fuel L9H had none either. AFM arrived on the 6.2L for 2010 as the L94 in the Escalade and Yukon Denali family. Published application lists show the 2007–2013 Sierra 1500 Denali with the L92\/L9H instead. The 2014-on EcoTec3 6.2L L86 brought AFM to the newer trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Avalanche?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Avalanche years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Avalanche 2007–2013 with 5.3L V8, 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Avalanche has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493783155060,"sku":"RC-AFM-DFM-01-14","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-14-1.jpg?v=1793172266"},{"product_id":"afm-dfm-vcm-disabler-chevrolet-uplander-2006-2008-afm-dfm-disabler","title":"Chevrolet Uplander 2006-2008 3.9L V6 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2006–2008 Chevrolet Uplander. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2006–2008 Chevrolet Uplander: 3.9L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eA Chevrolet Uplander with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2006–2008 Chevrolet Uplander).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eUplander\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eUplander\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eUplander\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich Chevrolet Uplander years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Uplander 2006–2008 with 3.9L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Uplander?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Uplander has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493783220596,"sku":"RC-AFM-DFM-01-15","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-15-1.jpg?v=1793172275"},{"product_id":"afm-dfm-vcm-disabler-gmc-sierra-1500-2007-2018-afm-dfm-disabler","title":"GMC Sierra 1500 2007-2018 4.3L\/5.3L\/6.0L\/6.2L V6\/V8 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2007–2018 GMC Sierra 1500. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007–2009 GMC Sierra 1500: 5.3L V8 \/ 6.0L V8\u003c\/li\u003e\n\u003cli\u003e2010–2013 GMC Sierra 1500: 5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2014 GMC Sierra 1500: 4.3L V6 \/ 5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2015–2017 GMC Sierra 1500: 4.3L V6 \/ 5.3L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2018 GMC Sierra 1500: 4.3L V6 \/ 5.3L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor reference, these are the AFM-equipped GM engine codes that match the years and displacements above:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLY5 (5.3L, 2007–2009, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLC9 (5.3L, 2007–2011, VIN 8th digit \"3\")\u003c\/li\u003e\n\u003cli\u003eLMG (5.3L, 2007–2014, VIN 8th digit \"0\")\u003c\/li\u003e\n\u003cli\u003eL76 (6.0L, 2007–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\n\u003cli\u003eLFA (6.0L, 2008–2009, VIN 8th digit \"5\")\u003c\/li\u003e\n\u003cli\u003eLZ1 (6.0L, 2010–2013, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLV3 (4.3L, 2014–2018)\u003c\/li\u003e\n\u003cli\u003eL83 (5.3L, 2014–2018, VIN 8th digit \"C\")\u003c\/li\u003e\n\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. Check your code against both lists before you buy.\u003c\/p\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003cp\u003eGM's 4.3L V6 (RPO LV3) uses the same idea on two cylinders: cylinders 3 and 6 are deactivated at light load, so the engine runs on four. On V8s, AFM drops cylinders 1, 7, 6 and 4. In both cases oil-pressure solenoids switch special lifters into a collapsed state and fuel to those cylinders is cut.\u003c\/p\u003e\u003cp\u003eFor the 2019 redesign of the Silverado 1500 and Sierra 1500, GM introduced Dynamic Fuel Management on the 5.3L L84 and 6.2L L87, which can run on 17 different cylinder patterns. That is a different system from the AFM covered by this listing.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2018 GMC Sierra 1500).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, LMG, L83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, L83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, L83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, L83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e4.3L V6 \/ 5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLV3, L83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLY5\u003c\/strong\u003e: iron-block 5.3L Vortec used in 2007–2009 trucks and SUVs, without variable valve timing or flex-fuel capability. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLC9\u003c\/strong\u003e: aluminum-block 5.3L flex-fuel (E85-capable) truck and SUV engine, with variable valve timing added from 2010. VIN engine digit \"3\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLMG\u003c\/strong\u003e: 5.3L flex-fuel truck and SUV engine, with variable valve timing from 2010. VIN engine digit \"0\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFA\u003c\/strong\u003e: 6.0L V8 used in the Two-Mode Hybrid trucks and SUVs, with variable valve timing. VIN engine digit \"5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLZ1\u003c\/strong\u003e: 6.0L hybrid V8 for 2010–2013 Two-Mode Hybrid models, flex-fuel capable with variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLV3\u003c\/strong\u003e: 4.3L EcoTec3 V6 with direct injection, the base engine in the 2014–2018 Silverado 1500 and Sierra 1500.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL83\u003c\/strong\u003e: 5.3L EcoTec3 V8 with direct injection, variable valve timing and flex-fuel capability. VIN engine digit \"C\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003eThe 6.2L V8 story: L92, L9H and L94\u003c\/h2\u003e\u003cp\u003eNot every GMT900 6.2L has cylinder deactivation. The L92 (2007–2008 Escalade, Yukon Denali and related models) had no working AFM, and the 2009 flex-fuel L9H had none either. AFM arrived on the 6.2L for 2010 as the L94 in the Escalade and Yukon Denali family. Published application lists show the 2007–2013 Sierra 1500 Denali with the L92\/L9H instead. The 2014-on EcoTec3 6.2L L86 brought AFM to the newer trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLY5\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003eiron block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLC9\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1 or 9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLMG\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1\u003c\/td\u003e\n\u003ctd\u003eAFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLFA\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLZ1\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLV3\u003c\/td\u003e\n\u003ctd\u003e4.3L\u003c\/td\u003e\n\u003ctd\u003e285 hp\u003c\/td\u003e\n\u003ctd\u003e305 lb-ft\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eV6, AFM, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e355–376 hp\u003c\/td\u003e\n\u003ctd\u003e383–416 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWhich GMC Sierra 1500 years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists GMC Sierra 1500 2007–2018 with 4.3L V6, 5.3L V8, 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the GMC Sierra 1500?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my GMC Sierra 1500 has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493783318900,"sku":"RC-AFM-DFM-01-16","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-16-1.jpg?v=1793172287"},{"product_id":"afm-dfm-vcm-disabler-gmc-sierra-denali-2010-2017-afm-dfm-disabler","title":"GMC Sierra Denali 2010-2017 6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2010–2017 GMC Sierra Denali. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2010–2017 GMC Sierra Denali: 6.2L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. Check your code against both lists before you buy.\u003c\/p\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003cp\u003eGM replaced AFM with Dynamic Fuel Management (DFM) on the 5.3L L84 and 6.2L L87 starting with the 2019 Silverado 1500 and Sierra 1500. The engines covered here use the earlier AFM design.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2010–2017 GMC Sierra Denali).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eThe 6.2L V8 story: L92, L9H and L94\u003c\/h2\u003e\u003cp\u003eNot every GMT900 6.2L has cylinder deactivation. The L92 (2007–2008 Escalade, Yukon Denali and related models) had no working AFM, and the 2009 flex-fuel L9H had none either. AFM arrived on the 6.2L for 2010 as the L94 in the Escalade and Yukon Denali family. Published application lists show the 2007–2013 Sierra 1500 Denali with the L92\/L9H instead. The 2014-on EcoTec3 6.2L L86 brought AFM to the newer trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the GMC Sierra Denali?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWhich GMC Sierra Denali years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists GMC Sierra Denali 2010–2017 with 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my GMC Sierra Denali has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493783351668,"sku":"RC-AFM-DFM-01-17","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-17-1.jpg?v=1793172296"},{"product_id":"afm-dfm-vcm-disabler-gmc-yukon-2007-2018-afm-dfm-disabler","title":"GMC Yukon 2007-2018 5.3L\/6.0L\/6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2007–2018 GMC Yukon. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007–2009 GMC Yukon: 5.3L V8 \/ 6.0L V8\u003c\/li\u003e\n\u003cli\u003e2010–2014 GMC Yukon: 5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2015–2017 GMC Yukon: 5.3L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2018 GMC Yukon: 5.3L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLY5 (5.3L, 2007–2009, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLC9 (5.3L, 2007–2011, VIN 8th digit \"3\")\u003c\/li\u003e\n\u003cli\u003eLMG (5.3L, 2007–2014, VIN 8th digit \"0\")\u003c\/li\u003e\n\u003cli\u003eL76 (6.0L, 2007–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\n\u003cli\u003eLFA (6.0L, 2008–2009, VIN 8th digit \"5\")\u003c\/li\u003e\n\u003cli\u003eLZ1 (6.0L, 2010–2013, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eL83 (5.3L, 2014–2018, VIN 8th digit \"C\")\u003c\/li\u003e\n\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. Check your code against both lists before you buy.\u003c\/p\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eOn AFM V8 engines, the computer shuts off fuel and holds the valves closed on cylinders 1, 7, 6 and 4 when the load is light, so the engine runs as a V4. It does this through special collapsible lifters on those cylinders, fed by oil-pressure solenoids. When you ask for more power, the lifters lock again and all eight cylinders fire. GM describes this behavior in its service bulletin on AFM and DFM operation.\u003c\/p\u003e\u003cp\u003eGM replaced AFM with Dynamic Fuel Management (DFM) on the 5.3L L84 and 6.2L L87 starting with the 2019 Silverado 1500 and Sierra 1500. The engines covered here use the earlier AFM design.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2018 GMC Yukon).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, L83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAbout these engine codes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLY5\u003c\/strong\u003e: iron-block 5.3L Vortec used in 2007–2009 trucks and SUVs, without variable valve timing or flex-fuel capability. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLC9\u003c\/strong\u003e: aluminum-block 5.3L flex-fuel (E85-capable) truck and SUV engine, with variable valve timing added from 2010. VIN engine digit \"3\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLMG\u003c\/strong\u003e: 5.3L flex-fuel truck and SUV engine, with variable valve timing from 2010. VIN engine digit \"0\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFA\u003c\/strong\u003e: 6.0L V8 used in the Two-Mode Hybrid trucks and SUVs, with variable valve timing. VIN engine digit \"5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLZ1\u003c\/strong\u003e: 6.0L hybrid V8 for 2010–2013 Two-Mode Hybrid models, flex-fuel capable with variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL83\u003c\/strong\u003e: 5.3L EcoTec3 V8 with direct injection, variable valve timing and flex-fuel capability. VIN engine digit \"C\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRead codes first; repair existing misfire or lifter faults before relying on the module.\u003c\/li\u003e\n\u003cli\u003eTop up the oil to the full mark with the correct grade.\u003c\/li\u003e\n\u003cli\u003eIgnition off.\u003c\/li\u003e\n\u003cli\u003eFind the OBD-II port under the dash.\u003c\/li\u003e\n\u003cli\u003eSeat the module fully and keep it away from the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eTest at light cruise and check that the reduced-cylinder mode no longer appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eWhich 6.2L engines have AFM\u003c\/h2\u003e\u003cp\u003eGM's 6.2L truck V8 changed three times in the GMT900 years. The L92 debuted in the 2007 Cadillac Escalade; engines built before April 1, 2006 carried AFM hardware that was never switched on, and later ones had none. For 2009 the engine became flex-fuel as the L9H, still without AFM. For 2010 GM added Active Fuel Management, creating the L94 used in the Escalade and Yukon Denali models. The 2007–2013 Sierra 1500 Denali is listed with the L92\/L9H family rather than the L94. From 2014 on, the trucks use the EcoTec3 6.2L L86, which has AFM.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLY5\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003eiron block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLC9\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1 or 9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLMG\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1\u003c\/td\u003e\n\u003ctd\u003eAFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLFA\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLZ1\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e355–376 hp\u003c\/td\u003e\n\u003ctd\u003e383–416 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWhich GMC Yukon years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists GMC Yukon 2007–2018 with 5.3L V8, 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the GMC Yukon?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my GMC Yukon has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493783384436,"sku":"RC-AFM-DFM-01-18","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-18-1.jpg?v=1793172304"},{"product_id":"afm-dfm-vcm-disabler-gmc-yukon-xl-1500-2007-2018-afm-dfm-disabler","title":"GMC Yukon XL 1500 2007-2018 5.3L\/6.0L\/6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2007–2018 GMC Yukon XL 1500: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007–2009 GMC Yukon XL 1500: 5.3L V8 \/ 6.0L V8\u003c\/li\u003e\n\u003cli\u003e2010–2014 GMC Yukon XL 1500: 5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2015–2017 GMC Yukon XL 1500: 5.3L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2018 GMC Yukon XL 1500: 5.3L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGM engine codes with AFM that line up with these years and displacements:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLY5 (5.3L, 2007–2009, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eLC9 (5.3L, 2007–2011, VIN 8th digit \"3\")\u003c\/li\u003e\n\u003cli\u003eLMG (5.3L, 2007–2014, VIN 8th digit \"0\")\u003c\/li\u003e\n\u003cli\u003eL76 (6.0L, 2007–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\n\u003cli\u003eLFA (6.0L, 2008–2009, VIN 8th digit \"5\")\u003c\/li\u003e\n\u003cli\u003eLZ1 (6.0L, 2010–2013, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003cli\u003eL83 (5.3L, 2014–2018, VIN 8th digit \"C\")\u003c\/li\u003e\n\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. Check your code against both lists before you buy.\u003c\/p\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003cp\u003eFor the 2019 redesign of the Silverado 1500 and Sierra 1500, GM introduced Dynamic Fuel Management on the 5.3L L84 and 6.2L L87, which can run on 17 different cylinder patterns. That is a different system from the AFM covered by this listing.\u003c\/p\u003e\u003ch2\u003eHow this differs from an AFM delete kit\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eIf the engine already has symptoms\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2018 GMC Yukon XL 1500).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8\u003c\/td\u003e\n\u003ctd\u003eLY5, LC9, LMG, L76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLC9, LMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, LZ1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLMG, L83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL83, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003e6.2L engine history\u003c\/h2\u003e\u003cp\u003eNot every GMT900 6.2L has cylinder deactivation. The L92 (2007–2008 Escalade, Yukon Denali and related models) had no working AFM, and the 2009 flex-fuel L9H had none either. AFM arrived on the 6.2L for 2010 as the L94 in the Escalade and Yukon Denali family. Published application lists show the 2007–2013 Sierra 1500 Denali with the L92\/L9H instead. The 2014-on EcoTec3 6.2L L86 brought AFM to the newer trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLY5\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003eiron block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLC9\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1 or 9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLMG\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e315–320 hp\u003c\/td\u003e\n\u003ctd\u003e335–340 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.60:1\u003c\/td\u003e\n\u003ctd\u003eAFM, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLFA\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLZ1\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL83\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e355–376 hp\u003c\/td\u003e\n\u003ctd\u003e383–416 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLY5\u003c\/strong\u003e: iron-block 5.3L Vortec used in 2007–2009 trucks and SUVs, without variable valve timing or flex-fuel capability. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLC9\u003c\/strong\u003e: aluminum-block 5.3L flex-fuel (E85-capable) truck and SUV engine, with variable valve timing added from 2010. VIN engine digit \"3\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLMG\u003c\/strong\u003e: 5.3L flex-fuel truck and SUV engine, with variable valve timing from 2010. VIN engine digit \"0\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFA\u003c\/strong\u003e: 6.0L V8 used in the Two-Mode Hybrid trucks and SUVs, with variable valve timing. VIN engine digit \"5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLZ1\u003c\/strong\u003e: 6.0L hybrid V8 for 2010–2013 Two-Mode Hybrid models, flex-fuel capable with variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL83\u003c\/strong\u003e: 5.3L EcoTec3 V8 with direct injection, variable valve timing and flex-fuel capability. VIN engine digit \"C\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my GMC Yukon XL 1500 has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWhich GMC Yukon XL 1500 years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists GMC Yukon XL 1500 2007–2018 with 5.3L V8, 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the GMC Yukon XL 1500?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eShipping, returns and warranty\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493784269172,"sku":"RC-AFM-DFM-01-19","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-19-1.jpg?v=1793172315"},{"product_id":"afm-dfm-vcm-disabler-gmc-yukon-denali-2007-2017-afm-dfm-disabler","title":"GMC Yukon Denali 2007-2017 6.0L\/6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2007–2017 GMC Yukon Denali. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007–2009 GMC Yukon Denali: 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2010–2017 GMC Yukon Denali: 6.2L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGM engine codes with AFM that line up with these years and displacements:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eL76 (6.0L, 2007–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\n\u003cli\u003eLFA (6.0L, 2008–2009, VIN 8th digit \"5\")\u003c\/li\u003e\n\u003cli\u003eL94 (6.2L, 2010–2014, VIN 8th digit \"F\")\u003c\/li\u003e\n\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. If your RPO list shows one of those codes, contact us before ordering.\u003c\/p\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003cp\u003eFor the 2019 redesign of the Silverado 1500 and Sierra 1500, GM introduced Dynamic Fuel Management on the 5.3L L84 and 6.2L L87, which can run on 17 different cylinder patterns. That is a different system from the AFM covered by this listing.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2017 GMC Yukon Denali).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon Denali\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003ePlatform and engine notes\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLFA\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e403 hp\u003c\/td\u003e\n\u003ctd\u003e417 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFA\u003c\/strong\u003e: 6.0L V8 used in the Two-Mode Hybrid trucks and SUVs, with variable valve timing. VIN engine digit \"5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL94\u003c\/strong\u003e: 6.2L V8 with variable valve timing and flex-fuel capability, used in Escalade and Yukon Denali models. VIN engine digit \"F\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eThe 6.2L V8 story: L92, L9H and L94\u003c\/h2\u003e\u003cp\u003eNot every GMT900 6.2L has cylinder deactivation. The L92 (2007–2008 Escalade, Yukon Denali and related models) had no working AFM, and the 2009 flex-fuel L9H had none either. AFM arrived on the 6.2L for 2010 as the L94 in the Escalade and Yukon Denali family. Published application lists show the 2007–2013 Sierra 1500 Denali with the L92\/L9H instead. The 2014-on EcoTec3 6.2L L86 brought AFM to the newer trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWhich GMC Yukon Denali years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists GMC Yukon Denali 2007–2017 with 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the GMC Yukon Denali?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my GMC Yukon Denali has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch2\u003eShipping, returns and warranty\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493784498548,"sku":"RC-AFM-DFM-01-20","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-20-1.jpg?v=1793172323"},{"product_id":"afm-dfm-vcm-disabler-gmc-denali-xl-2007-2017-afm-dfm-disabler","title":"GMC Denali XL 2007-2017 6.0L\/6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2007–2017 GMC Denali XL. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007–2009 GMC Denali XL: 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2010–2017 GMC Denali XL: 6.2L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eL76 (6.0L, 2007–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\n\u003cli\u003eLFA (6.0L, 2008–2009, VIN 8th digit \"5\")\u003c\/li\u003e\n\u003cli\u003eL94 (6.2L, 2010–2014, VIN 8th digit \"F\")\u003c\/li\u003e\n\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. If your RPO list shows one of those codes, contact us before ordering.\u003c\/p\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003cp\u003eFor the 2019 redesign of the Silverado 1500 and Sierra 1500, GM introduced Dynamic Fuel Management on the 5.3L L84 and 6.2L L87, which can run on 17 different cylinder patterns. That is a different system from the AFM covered by this listing.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2017 GMC Denali XL).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL76, LFA\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eDenali XL\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eEngine specifications\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLFA\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e332 hp\u003c\/td\u003e\n\u003ctd\u003e367 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.80:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e403 hp\u003c\/td\u003e\n\u003ctd\u003e417 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRead codes first; repair existing misfire or lifter faults before relying on the module.\u003c\/li\u003e\n\u003cli\u003eTop up the oil to the full mark with the correct grade.\u003c\/li\u003e\n\u003cli\u003eIgnition off.\u003c\/li\u003e\n\u003cli\u003eFind the OBD-II port under the dash.\u003c\/li\u003e\n\u003cli\u003eSeat the module fully and keep it away from the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eTest at light cruise and check that the reduced-cylinder mode no longer appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFA\u003c\/strong\u003e: 6.0L V8 used in the Two-Mode Hybrid trucks and SUVs, with variable valve timing. VIN engine digit \"5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL94\u003c\/strong\u003e: 6.2L V8 with variable valve timing and flex-fuel capability, used in Escalade and Yukon Denali models. VIN engine digit \"F\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe 6.2L V8 story: L92, L9H and L94\u003c\/h2\u003e\u003cp\u003eNot every GMT900 6.2L has cylinder deactivation. The L92 (2007–2008 Escalade, Yukon Denali and related models) had no working AFM, and the 2009 flex-fuel L9H had none either. AFM arrived on the 6.2L for 2010 as the L94 in the Escalade and Yukon Denali family. Published application lists show the 2007–2013 Sierra 1500 Denali with the L92\/L9H instead. The 2014-on EcoTec3 6.2L L86 brought AFM to the newer trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eGeneration notes\u003c\/h2\u003e\u003cp\u003eTwo platform generations are involved here. GMT900 trucks and SUVs (from the 2007 model year) used Gen IV small-block V8s, while K2XX models (2014-on pickups, 2015-on SUVs) switched to EcoTec3 engines with direct injection. AFM appears in both, but not on every engine in either, so match the RPO code.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the GMC Denali XL?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my GMC Denali XL has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWhich GMC Denali XL years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists GMC Denali XL 2007–2017 with 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493784531316,"sku":"RC-AFM-DFM-01-21","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-21-1.jpg?v=1793172330"},{"product_id":"afm-dfm-vcm-disabler-gmc-acadia-2007-2008-afm-dfm-disabler","title":"GMC Acadia 2007-2008 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2007–2008 GMC Acadia. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007–2008 GMC Acadia: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eCheck before ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007–2008 GMC Acadia).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eAcadia\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eAcadia\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eGM 3.6L V6 engines and AFM\u003c\/h2\u003e\u003cp\u003eFor V6 applications, the engine code matters more than the displacement. AFM is part of the LGX (2016-on Camaro, which drops cylinders 2 and 5) and the LGZ (2017-on Colorado and Canyon). The LFX that preceded them, including in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave run on all six cylinders all the time and are not candidates for this module.\u003c\/p\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the GMC Acadia?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWhich GMC Acadia years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists GMC Acadia 2007–2008 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my GMC Acadia has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493784564084,"sku":"RC-AFM-DFM-01-22","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-22-1.jpg?v=1793172340"},{"product_id":"afm-dfm-vcm-disabler-gmc-canyon-2015-2018-afm-dfm-disabler","title":"GMC Canyon 2015-2018 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2015–2018 GMC Canyon. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2015–2018 GMC Canyon: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eGM's cylinder deactivation saves fuel by running the engine on fewer cylinders during light-load cruising. The switch is controlled by the engine computer. The module talks to the vehicle through the OBD-II port and keeps that reduced-cylinder mode from being selected, so all cylinders stay active.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2015–2018 GMC Canyon).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eLGZ\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eLGZ\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLGZ\u003c\/td\u003e\n\u003ctd\u003e3.6L\u003c\/td\u003e\n\u003ctd\u003e308 hp\u003c\/td\u003e\n\u003ctd\u003e275 lb-ft\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eV6, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eLGZ service notes\u003c\/h2\u003e\u003cp\u003eGM's service notes for the 2017-on LGZ describe a variable-displacement, dual-pressure oil pump located inside the oil pan and specify dexos1 5W-30. The engine drives through the 8L45 eight-speed automatic. AFM on this engine is hydraulically switched, so oil grade and level still matter after the module is installed.\u003c\/p\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eGM built several 3.6L V6 versions, and only some have AFM. The LGX (2016-on Camaro) and the LGZ (2017-on Colorado and Canyon) both use direct injection, variable valve timing and Active Fuel Management, running on four cylinders at light load (cylinders 2 and 5 are shut down on the LGX). The LFX, used in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave do not have AFM. Your RPO code settles it.\u003c\/p\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhich GMC Canyon years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists GMC Canyon 2015–2018 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the GMC Canyon?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my GMC Canyon has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493784858996,"sku":"RC-AFM-DFM-01-24","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-24-1.jpg?v=1793172415"},{"product_id":"afm-dfm-vcm-disabler-gmc-envoy-2005-2009-afm-dfm-disabler","title":"GMC Envoy 2005-2009 5.3L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2005–2009 GMC Envoy. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2005–2009 GMC Envoy: 5.3L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLH6 (5.3L, 2005–2009, VIN 8th digit \"M\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eWhy owners disable it\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2005–2009 GMC Envoy).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e300–315 hp\u003c\/td\u003e\n\u003ctd\u003e330–338 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eLH6 background\u003c\/h2\u003e\u003cp\u003eThe LH6 replaced the Gen III LM4 for the 2005 model year and was the first Gen IV truck V8 built. Other users of the same engine include the Buick Rainier, Saab 9-7X, Isuzu Ascender and some 2007–2009 Silverado 1500 and Sierra 1500 trucks.\u003c\/p\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLH6\u003c\/strong\u003e: aluminum-block 5.3L V8 used in midsize SUVs, one of the first GM engines with Displacement on Demand. VIN engine digit \"M\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eThe 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV were the first GM vehicles sold with Displacement on Demand, using the 5.3L V8. The 5.3L LH6 in these midsize SUVs carried cylinder deactivation through the 2009 model year, when the line ended.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eHow do I tell which engine my GMC Envoy has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the GMC Envoy?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich GMC Envoy years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists GMC Envoy 2005–2009 with 5.3L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493784924532,"sku":"RC-AFM-DFM-01-23","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-23-1.jpg?v=1793172399"},{"product_id":"afm-dfm-vcm-disabler-cadillac-ats-2012-2019-afm-dfm-disabler","title":"Cadillac ATS 2012-2019 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2012–2019 Cadillac ATS. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2012–2019 Cadillac ATS: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eGM's cylinder deactivation saves fuel by running the engine on fewer cylinders during light-load cruising. The switch is controlled by the engine computer. The module talks to the vehicle through the OBD-II port and keeps that reduced-cylinder mode from being selected, so all cylinders stay active.\u003c\/p\u003e\u003ch2\u003eIf the engine already has symptoms\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eWhy owners disable it\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eCheck before ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2012–2019 Cadillac ATS).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eATS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eATS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eATS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eATS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eATS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eATS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eATS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eATS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eWhich 3.6L V6 engines have AFM\u003c\/h2\u003e\u003cp\u003eGM built several 3.6L V6 versions, and only some have AFM. The LGX (2016-on Camaro) and the LGZ (2017-on Colorado and Canyon) both use direct injection, variable valve timing and Active Fuel Management, running on four cylinders at light load (cylinders 2 and 5 are shut down on the LGX). The LFX, used in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave do not have AFM. Your RPO code settles it.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRead codes first; repair existing misfire or lifter faults before relying on the module.\u003c\/li\u003e\n\u003cli\u003eTop up the oil to the full mark with the correct grade.\u003c\/li\u003e\n\u003cli\u003eIgnition off.\u003c\/li\u003e\n\u003cli\u003eFind the OBD-II port under the dash.\u003c\/li\u003e\n\u003cli\u003eSeat the module fully and keep it away from the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eTest at light cruise and check that the reduced-cylinder mode no longer appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich Cadillac ATS years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac ATS 2012–2019 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac ATS?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac ATS has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493784957300,"sku":"RC-AFM-DFM-01-25","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-25-1.jpg?v=1793172426"},{"product_id":"afm-dfm-vcm-disabler-cadillac-ct6-2016-2018-afm-dfm-disabler","title":"Cadillac CT6 2016-2018 3.0L\/3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2016–2018 Cadillac CT6: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2016–2018 Cadillac CT6: 3.0L V6 \/ 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eA Cadillac CT6 with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2016–2018 Cadillac CT6).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCT6\u003c\/td\u003e\n\u003ctd\u003e3.0L V6 \/ 3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCT6\u003c\/td\u003e\n\u003ctd\u003e3.0L V6 \/ 3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCT6\u003c\/td\u003e\n\u003ctd\u003e3.0L V6 \/ 3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGM 3.6L V6 engines and AFM\u003c\/h2\u003e\u003cp\u003eGM built several 3.6L V6 versions, and only some have AFM. The LGX (2016-on Camaro) and the LGZ (2017-on Colorado and Canyon) both use direct injection, variable valve timing and Active Fuel Management, running on four cylinders at light load (cylinders 2 and 5 are shut down on the LGX). The LFX, used in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave do not have AFM. Your RPO code settles it.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich Cadillac CT6 years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac CT6 2016–2018 with 3.0L V6, 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac CT6?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac CT6 has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eShipping, returns and warranty\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785153908,"sku":"RC-AFM-DFM-01-26","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-26-1.jpg?v=1793172438"},{"product_id":"afm-dfm-vcm-disabler-cadillac-cts-2004-2018-afm-dfm-disabler","title":"Cadillac CTS 2004-2018 3.6L\/6.0L\/6.2L V6\/V8 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2004–2018 Cadillac CTS: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2004–2018 Cadillac CTS: 3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003eThe first drive\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eIf the engine already has symptoms\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2004–2018 Cadillac CTS).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac CTS?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Cadillac CTS years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac CTS 2004–2018 with 3.6L V6, 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac CTS has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785186676,"sku":"RC-AFM-DFM-01-27","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-27-1.jpg?v=1793172448"},{"product_id":"afm-dfm-vcm-disabler-cadillac-escalade-2010-2017-afm-dfm-disabler","title":"Cadillac Escalade 2010-2017 6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2010–2017 Cadillac Escalade: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2010–2017 Cadillac Escalade: 6.2L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFor reference, these are the AFM-equipped GM engine codes that match the years and displacements above:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eL94 (6.2L, 2010–2014, VIN 8th digit \"F\")\u003c\/li\u003e\n\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. If your RPO list shows one of those codes, contact us before ordering.\u003c\/p\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eOn AFM V8 engines, the computer shuts off fuel and holds the valves closed on cylinders 1, 7, 6 and 4 when the load is light, so the engine runs as a V4. It does this through special collapsible lifters on those cylinders, fed by oil-pressure solenoids. When you ask for more power, the lifters lock again and all eight cylinders fire. GM describes this behavior in its service bulletin on AFM and DFM operation.\u003c\/p\u003e\u003cp\u003eGM replaced AFM with Dynamic Fuel Management (DFM) on the 5.3L L84 and 6.2L L87 starting with the 2019 Silverado 1500 and Sierra 1500. The engines covered here use the earlier AFM design.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eHow this differs from an AFM delete kit\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2010–2017 Cadillac Escalade).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eTwo platform generations are involved here. GMT900 trucks and SUVs (from the 2007 model year) used Gen IV small-block V8s, while K2XX models (2014-on pickups, 2015-on SUVs) switched to EcoTec3 engines with direct injection. AFM appears in both, but not on every engine in either, so match the RPO code.\u003c\/p\u003e\u003ch2\u003eThe 6.2L V8 story: L92, L9H and L94\u003c\/h2\u003e\u003cp\u003eNot every GMT900 6.2L has cylinder deactivation. The L92 (2007–2008 Escalade, Yukon Denali and related models) had no working AFM, and the 2009 flex-fuel L9H had none either. AFM arrived on the 6.2L for 2010 as the L94 in the Escalade and Yukon Denali family. Published application lists show the 2007–2013 Sierra 1500 Denali with the L92\/L9H instead. The 2014-on EcoTec3 6.2L L86 brought AFM to the newer trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eL94\u003c\/strong\u003e: 6.2L V8 with variable valve timing and flex-fuel capability, used in Escalade and Yukon Denali models. VIN engine digit \"F\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e403 hp\u003c\/td\u003e\n\u003ctd\u003e417 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac Escalade?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWhich Cadillac Escalade years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac Escalade 2010–2017 with 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac Escalade has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785252212,"sku":"RC-AFM-DFM-01-28","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-28-1.jpg?v=1793172459"},{"product_id":"afm-dfm-vcm-disabler-cadillac-escalade-esv-2010-2017-afm-dfm-disabler","title":"Cadillac Escalade ESV 2010-2017 6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2010–2017 Cadillac Escalade ESV. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2010–2017 Cadillac Escalade ESV: 6.2L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFor reference, these are the AFM-equipped GM engine codes that match the years and displacements above:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eL94 (6.2L, 2010–2014, VIN 8th digit \"F\")\u003c\/li\u003e\n\u003cli\u003eL86 (6.2L, 2014–2018, VIN 8th digit \"J\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. Check your code against both lists before you buy.\u003c\/p\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eOn AFM V8 engines, the computer shuts off fuel and holds the valves closed on cylinders 1, 7, 6 and 4 when the load is light, so the engine runs as a V4. It does this through special collapsible lifters on those cylinders, fed by oil-pressure solenoids. When you ask for more power, the lifters lock again and all eight cylinders fire. GM describes this behavior in its service bulletin on AFM and DFM operation.\u003c\/p\u003e\u003cp\u003eGM replaced AFM with Dynamic Fuel Management (DFM) on the 5.3L L84 and 6.2L L87 starting with the 2019 Silverado 1500 and Sierra 1500. The engines covered here use the earlier AFM design.\u003c\/p\u003e\u003ch2\u003eThe first drive\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eA Cadillac Escalade ESV with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2010–2017 Cadillac Escalade ESV).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade ESV\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade ESV\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade ESV\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade ESV\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade ESV\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94, L86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade ESV\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade ESV\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade ESV\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003ch2\u003eWhich 6.2L engines have AFM\u003c\/h2\u003e\u003cp\u003eNot every GMT900 6.2L has cylinder deactivation. The L92 (2007–2008 Escalade, Yukon Denali and related models) had no working AFM, and the 2009 flex-fuel L9H had none either. AFM arrived on the 6.2L for 2010 as the L94 in the Escalade and Yukon Denali family. Published application lists show the 2007–2013 Sierra 1500 Denali with the L92\/L9H instead. The 2014-on EcoTec3 6.2L L86 brought AFM to the newer trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eL94\u003c\/strong\u003e: 6.2L V8 with variable valve timing and flex-fuel capability, used in Escalade and Yukon Denali models. VIN engine digit \"F\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eL86\u003c\/strong\u003e: 6.2L EcoTec3 V8 with direct injection and variable valve timing. VIN engine digit \"J\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e403 hp\u003c\/td\u003e\n\u003ctd\u003e417 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL86\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e420 hp\u003c\/td\u003e\n\u003ctd\u003e460 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRead codes first; repair existing misfire or lifter faults before relying on the module.\u003c\/li\u003e\n\u003cli\u003eTop up the oil to the full mark with the correct grade.\u003c\/li\u003e\n\u003cli\u003eIgnition off.\u003c\/li\u003e\n\u003cli\u003eFind the OBD-II port under the dash.\u003c\/li\u003e\n\u003cli\u003eSeat the module fully and keep it away from the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eTest at light cruise and check that the reduced-cylinder mode no longer appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003ePlatform and engine notes\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac Escalade ESV?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Cadillac Escalade ESV years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac Escalade ESV 2010–2017 with 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac Escalade ESV has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785350516,"sku":"RC-AFM-DFM-01-29","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-29-1.jpg?v=1793172468"},{"product_id":"afm-dfm-vcm-disabler-cadillac-escalade-ext-2010-2013-afm-dfm-disabler","title":"Cadillac Escalade EXT 2010-2013 6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2010–2013 Cadillac Escalade EXT. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2010–2013 Cadillac Escalade EXT: 6.2L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eL94 (6.2L, 2010–2014, VIN 8th digit \"F\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. Check your code against both lists before you buy.\u003c\/p\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2010–2013 Cadillac Escalade EXT).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade EXT\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade EXT\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade EXT\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade EXT\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e403 hp\u003c\/td\u003e\n\u003ctd\u003e417 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eGeneration notes\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eL94\u003c\/strong\u003e: 6.2L V8 with variable valve timing and flex-fuel capability, used in Escalade and Yukon Denali models. VIN engine digit \"F\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003e6.2L engine history\u003c\/h2\u003e\u003cp\u003eGM's 6.2L truck V8 changed three times in the GMT900 years. The L92 debuted in the 2007 Cadillac Escalade; engines built before April 1, 2006 carried AFM hardware that was never switched on, and later ones had none. For 2009 the engine became flex-fuel as the L9H, still without AFM. For 2010 GM added Active Fuel Management, creating the L94 used in the Escalade and Yukon Denali models. The 2007–2013 Sierra 1500 Denali is listed with the L92\/L9H family rather than the L94. From 2014 on, the trucks use the EcoTec3 6.2L L86, which has AFM.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac Escalade EXT?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWhich Cadillac Escalade EXT years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac Escalade EXT 2010–2013 with 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac Escalade EXT has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785383284,"sku":"RC-AFM-DFM-01-30","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-30-1.jpg?v=1793172477"},{"product_id":"afm-dfm-vcm-disabler-cadillac-srx-2004-2009-afm-dfm-disabler","title":"Cadillac SRX 2004-2009 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2004–2009 Cadillac SRX: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2004–2009 Cadillac SRX: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eGM's cylinder deactivation saves fuel by running the engine on fewer cylinders during light-load cruising. The switch is controlled by the engine computer. The module talks to the vehicle through the OBD-II port and keeps that reduced-cylinder mode from being selected, so all cylinders stay active.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2004–2009 Cadillac SRX).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eSRX\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eSRX\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eSRX\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eSRX\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eSRX\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eSRX\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eWhich 3.6L V6 engines have AFM\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac SRX?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Cadillac SRX years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac SRX 2004–2009 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac SRX has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785743732,"sku":"RC-AFM-DFM-01-31","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-31-1.jpg?v=1793172486"},{"product_id":"afm-dfm-vcm-disabler-cadillac-xt5-2016-2019-afm-dfm-disabler","title":"Cadillac XT5 2016-2019 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2016–2019 Cadillac XT5: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2016–2019 Cadillac XT5: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eGM's cylinder deactivation saves fuel by running the engine on fewer cylinders during light-load cruising. The switch is controlled by the engine computer. The module talks to the vehicle through the OBD-II port and keeps that reduced-cylinder mode from being selected, so all cylinders stay active.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2016–2019 Cadillac XT5).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXT5\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXT5\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXT5\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXT5\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRead codes first; repair existing misfire or lifter faults before relying on the module.\u003c\/li\u003e\n\u003cli\u003eTop up the oil to the full mark with the correct grade.\u003c\/li\u003e\n\u003cli\u003eIgnition off.\u003c\/li\u003e\n\u003cli\u003eFind the OBD-II port under the dash.\u003c\/li\u003e\n\u003cli\u003eSeat the module fully and keep it away from the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eTest at light cruise and check that the reduced-cylinder mode no longer appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eGM 3.6L V6 engines and AFM\u003c\/h2\u003e\u003cp\u003eFor V6 applications, the engine code matters more than the displacement. AFM is part of the LGX (2016-on Camaro, which drops cylinders 2 and 5) and the LGZ (2017-on Colorado and Canyon). The LFX that preceded them, including in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave run on all six cylinders all the time and are not candidates for this module.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich Cadillac XT5 years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac XT5 2016–2019 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac XT5?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac XT5 has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785776500,"sku":"RC-AFM-DFM-01-32","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-32-1.jpg?v=1793172499"},{"product_id":"afm-dfm-vcm-disabler-cadillac-sts-2005-2007-afm-dfm-disabler","title":"Cadillac STS 2005-2007 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2005–2007 Cadillac STS. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2005–2007 Cadillac STS: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eGM's cylinder deactivation saves fuel by running the engine on fewer cylinders during light-load cruising. The switch is controlled by the engine computer. The module talks to the vehicle through the OBD-II port and keeps that reduced-cylinder mode from being selected, so all cylinders stay active.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2005–2007 Cadillac STS).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eSTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eSTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eSTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eFor V6 applications, the engine code matters more than the displacement. AFM is part of the LGX (2016-on Camaro, which drops cylinders 2 and 5) and the LGZ (2017-on Colorado and Canyon). The LFX that preceded them, including in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave run on all six cylinders all the time and are not candidates for this module.\u003c\/p\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich Cadillac STS years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac STS 2005–2007 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac STS?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac STS has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785842036,"sku":"RC-AFM-DFM-01-33","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-33-1.jpg?v=1793172507"},{"product_id":"cadillac-xts-2013-2018-36l-v6-afm-dfm-disabler","title":"Cadillac XTS 2013-2018 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2013–2018 Cadillac XTS. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2013–2018 Cadillac XTS: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eA Cadillac XTS with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2013–2018 Cadillac XTS).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eWhich 3.6L V6 engines have AFM\u003c\/h2\u003e\u003cp\u003eFor V6 applications, the engine code matters more than the displacement. AFM is part of the LGX (2016-on Camaro, which drops cylinders 2 and 5) and the LGZ (2017-on Colorado and Canyon). The LFX that preceded them, including in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave run on all six cylinders all the time and are not candidates for this module.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac XTS?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Cadillac XTS years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac XTS 2013–2018 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac XTS has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785874804,"sku":"RC-AFM-DFM-01-34","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-34-1.jpg?v=1793172514"},{"product_id":"afm-dfm-vcm-disabler-pontiac-g6-2007-2009-afm-dfm-disabler","title":"Pontiac G6 2007-2009 3.9L V6 \/ 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2007 Pontiac G6, 2007 Pontiac G6 GTP and 2008–2009 Pontiac G6 GXP. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007 Pontiac G6: 3.9L V6\u003c\/li\u003e\n\u003cli\u003e2007 Pontiac G6 GTP: 3.6L V6\u003c\/li\u003e\n\u003cli\u003e2008–2009 Pontiac G6 GXP: 3.6L V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eCheck before ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2007 Pontiac G6, 2007 Pontiac G6 GTP and 2008–2009 Pontiac G6 GXP).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG6\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG6 GTP\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG6 GXP\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG6 GXP\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eGM built several 3.6L V6 versions, and only some have AFM. The LGX (2016-on Camaro) and the LGZ (2017-on Colorado and Canyon) both use direct injection, variable valve timing and Active Fuel Management, running on four cylinders at light load (cylinders 2 and 5 are shut down on the LGX). The LFX, used in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave do not have AFM. Your RPO code settles it.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Pontiac?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Pontiac years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Pontiac G6 2007; Pontiac G6 GTP 2007; Pontiac G6 GXP 2008–2009 with 3.6L V6, 3.9L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Pontiac has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eShipping, returns and warranty\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493786857844,"sku":"RC-AFM-DFM-01-35","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-35-1.jpg?v=1793172528"},{"product_id":"afm-dfm-vcm-disabler-pontiac-g8-gt-gxp-2008-2010-afm-dfm-disabler","title":"Pontiac G8 \/ G8 GT \/ G8 GXP 2008-2010 3.6L\/6.0L\/6.2L V6\/V8 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2008–2009 Pontiac G8, 2008–2009 Pontiac G8 GT and 2009–2010 Pontiac G8 GXP. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2008–2009 Pontiac G8: 3.6L V6\u003c\/li\u003e\n\u003cli\u003e2008–2009 Pontiac G8 GT: 6.0L V8\u003c\/li\u003e\n\u003cli\u003e2009–2010 Pontiac G8 GXP: 6.2L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGM engine codes with AFM that line up with these years and displacements:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eL76 (6.0L, 2008–2009, VIN 8th digit \"Y\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eA Pontiac with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eThe first drive\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2008–2009 Pontiac G8, 2008–2009 Pontiac G8 GT and 2009–2010 Pontiac G8 GXP).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8 GT\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8 GT\u003c\/td\u003e\n\u003ctd\u003e6.0L V8\u003c\/td\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8 GXP\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8 GXP\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eL76\u003c\/strong\u003e: aluminum-block 6.0L V8 with rectangular-port heads; the 2007–2009 truck version also has variable valve timing. VIN engine digit \"Y\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eWhich 3.6L V6 engines have AFM\u003c\/h2\u003e\u003cp\u003eGM built several 3.6L V6 versions, and only some have AFM. The LGX (2016-on Camaro) and the LGZ (2017-on Colorado and Canyon) both use direct injection, variable valve timing and Active Fuel Management, running on four cylinders at light load (cylinders 2 and 5 are shut down on the LGX). The LFX, used in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave do not have AFM. Your RPO code settles it.\u003c\/p\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL76\u003c\/td\u003e\n\u003ctd\u003e6.0L\u003c\/td\u003e\n\u003ctd\u003e348–367 hp\u003c\/td\u003e\n\u003ctd\u003e376–385 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT on truck versions\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWhich Pontiac years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Pontiac G8 2008–2009; Pontiac G8 GT 2008–2009; Pontiac G8 GXP 2009–2010 with 3.6L V6, 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Pontiac?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Pontiac has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch2\u003eShipping, returns and warranty\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493786988916,"sku":"RC-AFM-DFM-01-36","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-36-1.jpg?v=1793172535"},{"product_id":"afm-dfm-vcm-disabler-pontiac-grand-prix-2005-2008-afm-dfm-disabler","title":"Pontiac Grand Prix 2005-2008 3.9L\/5.3L V6\/V8 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2005–2008 Pontiac Grand Prix. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2005–2006 Pontiac Grand Prix: 5.3L V8\u003c\/li\u003e\n\u003cli\u003e2007 Pontiac Grand Prix: 5.3L V8 \/ 3.9L V6\u003c\/li\u003e\n\u003cli\u003e2008 Pontiac Grand Prix: 5.3L V8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor reference, these are the AFM-equipped GM engine codes that match the years and displacements above:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLS4 (5.3L, 2005–2009, VIN 8th digit \"C\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2005–2008 Pontiac Grand Prix).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003e5.3L V8 \/ 3.9L V6\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003ePublished ratings for these engines\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e300–303 hp\u003c\/td\u003e\n\u003ctd\u003e323 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, front-wheel drive\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eAbout these engine codes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLS4\u003c\/strong\u003e: 5.3L V8 mounted transversely in front-drive cars such as the Impala SS, Monte Carlo SS and Grand Prix GXP. VIN engine digit \"C\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Pontiac Grand Prix?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Pontiac Grand Prix years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Pontiac Grand Prix 2005–2008 with 3.9L V6, 5.3L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Pontiac Grand Prix has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493787021684,"sku":"RC-AFM-DFM-01-37","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-37-1.jpg?v=1793172543"},{"product_id":"afm-dfm-vcm-disabler-pontiac-montana-montana-sv6-2006-2008-afm-dfm-disabler","title":"Pontiac Montana \/ Montana SV6 2006-2008 3.9L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2006–2008 Pontiac Montana SV6 and 2007–2008 Pontiac Montana. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2006–2008 Pontiac Montana SV6: 3.9L V6\u003c\/li\u003e\n\u003cli\u003e2007–2008 Pontiac Montana: 3.9L V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eA Pontiac Montana SV6 and Pontiac Montana with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eThe first drive\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eA mechanical AFM delete swaps the deactivating lifters (and often the camshaft and lifter oil manifold) for non-AFM parts and requires a tune afterwards. A tune alone can switch AFM off in software. This module works through the OBD-II port instead, so the engine hardware and its calibration stay stock. That makes it the easiest option to reverse, and the right one only when the engine is mechanically healthy.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2006–2008 Pontiac Montana SV6 and 2007–2008 Pontiac Montana).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eMontana\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eMontana\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eMontana SV6\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eMontana SV6\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eMontana SV6\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRead codes first; repair existing misfire or lifter faults before relying on the module.\u003c\/li\u003e\n\u003cli\u003eTop up the oil to the full mark with the correct grade.\u003c\/li\u003e\n\u003cli\u003eIgnition off.\u003c\/li\u003e\n\u003cli\u003eFind the OBD-II port under the dash.\u003c\/li\u003e\n\u003cli\u003eSeat the module fully and keep it away from the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eTest at light cruise and check that the reduced-cylinder mode no longer appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWhich Pontiac Montana SV6 and Pontiac Montana years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Pontiac Montana SV6 2006–2008; Pontiac Montana 2007–2008 with 3.9L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Pontiac Montana SV6 and Pontiac Montana?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Pontiac Montana SV6 and Pontiac Montana has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch2\u003eShipping, returns and warranty\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493787054452,"sku":"RC-AFM-DFM-01-38","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-38-1.jpg?v=1793172553"},{"product_id":"afm-dfm-vcm-disabler-pontiac-torrent-gxp-2008-2009-afm-dfm-disabler","title":"Pontiac Torrent GXP 2008-2009 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2008–2009 Pontiac Torrent GXP. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2008–2009 Pontiac Torrent GXP: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eGM's cylinder deactivation saves fuel by running the engine on fewer cylinders during light-load cruising. The switch is controlled by the engine computer. The module talks to the vehicle through the OBD-II port and keeps that reduced-cylinder mode from being selected, so all cylinders stay active.\u003c\/p\u003e\u003ch2\u003eWhy owners disable it\u003c\/h2\u003e\u003cp\u003eA Pontiac Torrent GXP with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eIf the engine already has symptoms\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2008–2009 Pontiac Torrent GXP).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eTorrent GXP\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eTorrent GXP\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003ch2\u003eGM 3.6L V6 engines and AFM\u003c\/h2\u003e\u003cp\u003eFor V6 applications, the engine code matters more than the displacement. AFM is part of the LGX (2016-on Camaro, which drops cylinders 2 and 5) and the LGZ (2017-on Colorado and Canyon). The LFX that preceded them, including in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave run on all six cylinders all the time and are not candidates for this module.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWhich Pontiac Torrent GXP years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Pontiac Torrent GXP 2008–2009 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Pontiac Torrent GXP?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Pontiac Torrent GXP has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493787087220,"sku":"RC-AFM-DFM-01-39","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-39-1.jpg?v=1793172561"},{"product_id":"afm-dfm-vcm-disabler-buick-enclave-2008-2018-afm-dfm-disabler","title":"Buick Enclave 2008-2018 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2008–2018 Buick Enclave. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2008–2018 Buick Enclave: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eThe first drive\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eCheck before ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2008–2018 Buick Enclave).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eWhich 3.6L V6 engines have AFM\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Buick Enclave?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWhich Buick Enclave years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Buick Enclave 2008–2018 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Buick Enclave has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493787316596,"sku":"RC-AFM-DFM-01-40","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-40-1.jpg?v=1793172569"},{"product_id":"afm-dfm-vcm-disabler-buick-lacrosse-lacrosse-cxs-2005-2018-afm-dfm-disabler","title":"Buick LaCrosse \/ LaCrosse CXS 2005-2018 3.6L\/5.3L V6\/V8 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2005–2008 Buick LaCrosse CXS and 2006–2009, 2016–2018 Buick LaCrosse. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2005–2008 Buick LaCrosse CXS: 3.6L V6\u003c\/li\u003e\n\u003cli\u003e2006–2009 Buick LaCrosse: 5.3L V8\u003c\/li\u003e\n\u003cli\u003e2016–2018 Buick LaCrosse: 3.6L V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor reference, these are the AFM-equipped GM engine codes that match the years and displacements above:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLS4 (5.3L, 2005–2009, VIN 8th digit \"C\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eHow this differs from an AFM delete kit\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eWhy owners disable it\u003c\/h2\u003e\u003cp\u003eA Buick LaCrosse CXS and Buick LaCrosse with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2005–2008 Buick LaCrosse CXS and 2006–2009, 2016–2018 Buick LaCrosse).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse CXS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse CXS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse CXS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse CXS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eWhich 3.6L V6 engines have AFM\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLS4\u003c\/strong\u003e: 5.3L V8 mounted transversely in front-drive cars such as the Impala SS, Monte Carlo SS and Grand Prix GXP. VIN engine digit \"C\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eEngine specifications\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e300–303 hp\u003c\/td\u003e\n\u003ctd\u003e323 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, front-wheel drive\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Buick LaCrosse CXS and Buick LaCrosse?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Buick LaCrosse CXS and Buick LaCrosse has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWhich Buick LaCrosse CXS and Buick LaCrosse years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Buick LaCrosse CXS 2005–2008; Buick LaCrosse 2006–2009, 2016–2018 with 3.6L V6, 5.3L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493787349364,"sku":"RC-AFM-DFM-01-41","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-41-1.jpg?v=1793172579"},{"product_id":"afm-dfm-vcm-disabler-buick-rainier-2005-2007-afm-dfm-disabler","title":"Buick Rainier 2005-2007 5.3L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2005–2007 Buick Rainier: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2005–2007 Buick Rainier: 5.3L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM engine codes with AFM that line up with these years and displacements:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLH6 (5.3L, 2005–2009, VIN 8th digit \"M\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003eThe first drive\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2005–2007 Buick Rainier).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRainier\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRainier\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRainier\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eEngine specifications\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLH6\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e300–315 hp\u003c\/td\u003e\n\u003ctd\u003e330–338 lb-ft\u003c\/td\u003e\n\u003ctd\u003e9.95:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eWhere else the LH6 was used\u003c\/h2\u003e\u003cp\u003eBesides the TrailBlazer and Envoy, the LH6 went into the Buick Rainier, Saab 9-7X and Isuzu Ascender, and into some 2007–2009 Silverado 1500 and Sierra 1500 pickups. It replaced the Gen III LM4 for 2005 and was the first Generation IV truck V8 to go into production.\u003c\/p\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eGM launched Displacement on Demand, later called AFM, on the 2005 TrailBlazer EXT and Envoy XL\/XUV with the 5.3L V8. The LH6 5.3L in this family of midsize SUVs kept the system until production ended after 2009.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRead codes first; repair existing misfire or lifter faults before relying on the module.\u003c\/li\u003e\n\u003cli\u003eTop up the oil to the full mark with the correct grade.\u003c\/li\u003e\n\u003cli\u003eIgnition off.\u003c\/li\u003e\n\u003cli\u003eFind the OBD-II port under the dash.\u003c\/li\u003e\n\u003cli\u003eSeat the module fully and keep it away from the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eTest at light cruise and check that the reduced-cylinder mode no longer appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLH6\u003c\/strong\u003e: aluminum-block 5.3L V8 used in midsize SUVs, one of the first GM engines with Displacement on Demand. VIN engine digit \"M\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Buick Rainier has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Buick Rainier?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Buick Rainier years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Buick Rainier 2005–2007 with 5.3L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493787382132,"sku":"RC-AFM-DFM-01-42","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-42-1.jpg?v=1793172587"},{"product_id":"afm-dfm-vcm-disabler-buick-rendezvous-cxl-ultra-2004-2007-afm-dfm-disabler","title":"Buick Rendezvous \/ Rendezvous CXL\/Ultra 2004-2007 3.6L\/3.9L V6 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2004–2007 Buick Rendezvous. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. No tools, no wiring and no reflash of the engine computer. Unplug it and AFM works again as it did from the factory.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2004–2007 Buick Rendezvous: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eHow this differs from an AFM delete kit\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2004–2007 Buick Rendezvous).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRendezvous\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRendezvous\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRendezvous\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRendezvous\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRendezvous\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRendezvous\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eWhich 3.6L V6 engines have AFM\u003c\/h2\u003e\u003cp\u003eFor V6 applications, the engine code matters more than the displacement. AFM is part of the LGX (2016-on Camaro, which drops cylinders 2 and 5) and the LGZ (2017-on Colorado and Canyon). The LFX that preceded them, including in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave run on all six cylinders all the time and are not candidates for this module.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA light comes on:\u003c\/strong\u003e Pull the module, read the code, and send it with your VIN to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill dropping cylinders:\u003c\/strong\u003e Check the module is pushed fully into the port and that your engine is AFM-equipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed the port for diagnostics:\u003c\/strong\u003e Remove the module first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNoise or misfire persists:\u003c\/strong\u003e Have the engine inspected; the module only stops cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Buick Rendezvous?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWhich Buick Rendezvous years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Buick Rendezvous 2004–2007 with 3.6L V6, 3.9L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Buick Rendezvous has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493787873652,"sku":"RC-AFM-DFM-01-43","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-43-1.jpg?v=1793172594"},{"product_id":"afm-dfm-vcm-disabler-buick-terraza-regal-gs-2006-2018-afm-dfm-disabler","title":"Buick Terraza 2006-2008 3.9L V6 \u0026 Regal GS 2018 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2006–2008 Buick Terraza and 2018 Buick Regal GS. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2006–2008 Buick Terraza: 3.9L V6\u003c\/li\u003e\n\u003cli\u003e2018 Buick Regal GS: 3.6L V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eGM's cylinder deactivation saves fuel by running the engine on fewer cylinders during light-load cruising. The switch is controlled by the engine computer. The module talks to the vehicle through the OBD-II port and keeps that reduced-cylinder mode from being selected, so all cylinders stay active.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2006–2008 Buick Terraza and 2018 Buick Regal GS).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal GS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eTerraza\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eTerraza\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eTerraza\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eGM 3.6L V6 engines and AFM\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWhich Buick Terraza and Buick Regal GS years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Buick Terraza 2006–2008; Buick Regal GS 2018 with 3.6L V6, 3.9L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Buick Terraza and Buick Regal GS has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Buick Terraza and Buick Regal GS?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493787939188,"sku":"RC-AFM-DFM-01-44","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-44-1.jpg?v=1793172602"},{"product_id":"afm-dfm-vcm-disabler-honda-ridgeline-2007-2026-vcm-disabler","title":"Honda Ridgeline 2007-2026 VCM Disabler Harness","description":"\u003cp\u003eA plug-in VCM disabler for the 2007–2026 Honda Ridgeline. Instead of using the OBD-II port, this harness works on the ECT1 coolant-temperature signal that the engine computer checks before allowing VCM. It comes with 68Ω, 82Ω, 100Ω and 120Ω settings.\u003c\/p\u003e\u003cp\u003eThe factory system is not reprogrammed, and the harness comes out by unplugging it.\u003c\/p\u003e\u003ch2\u003eCovered model years\u003c\/h2\u003e\u003cp\u003eListed applications (100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda Ridgeline: 2007–2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eVCM on the Ridgeline starts with the 2017 model year (J35Y6 engine, VCM-3). First-generation trucks (2006–2014) have a non-VCM J35, so email us the VIN before ordering for one of those years.\u003c\/p\u003e\u003cp\u003eEngine generations above come from Honda and published engine references; check your VIN against them before ordering.\u003c\/p\u003e\u003ch2\u003eWhat VCM does\u003c\/h2\u003e\u003cp\u003eAt light load, Honda's VCM idles one bank of cylinders. A synchronizing piston inside the rocker assembly disconnects the rocker arms for those cylinders from the cam, so their valves stay shut, and their injectors stop. Depending on generation, the engine runs on 3, 4 or 6 cylinders. The engine computer only allows this when its temperature and load conditions are met.\u003c\/p\u003e\u003ch2\u003eHow the harness works\u003c\/h2\u003e\u003cp\u003eBecause VCM is held off until the engine is warm, the coolant temperature input is the cleanest point to control it without touching software. The harness places a selectable resistor in the ECT1 signal circuit. Higher values shift the reading further. Pick the setting listed for your model in the instructions rather than going straight to the highest value.\u003c\/p\u003e\u003ch2\u003eWhat to expect\u003c\/h2\u003e\u003cp\u003eDrive the vehicle until it is fully warm and cruise at a steady, light throttle, which is where VCM used to engage. The engine should stay on six cylinders, so the vibration or hum that came with three-cylinder mode should not return. Keep an eye on the temperature gauge for the first few drives and confirm no warning lights appear. Expect light-load fuel economy to be a little lower than before.\u003c\/p\u003e\u003ch2\u003eWhy owners turn VCM off\u003c\/h2\u003e\u003cp\u003eVCM saves fuel, but many drivers prefer consistent behavior, particularly when towing or carrying a full load. The switching can feel like a vibration through the floor or steering wheel, and some engines show oil-related symptoms on the deactivated bank over time. Disabling VCM trades a little light-load economy for predictable engine operation.\u003c\/p\u003e\u003ch2\u003eFitting it\u003c\/h2\u003e\u003cp\u003eThe harness has a sensor-side plug and a vehicle-side plug. Fit it with the engine off and cool, confirm both locks click, select the resistance value from the instructions, and route the lead away from heat and moving parts. Removal is the reverse.\u003c\/p\u003e\u003ch2\u003eWhich VCM your engine has\u003c\/h2\u003e\u003cp\u003eHonda has used several versions of VCM. The first (2005–2007 Odyssey, early Pilot 2WD) switched between 3 and 6 cylinders. VCM-2, used on many 2008–2015 engines, added a 4-cylinder mode that idles one cylinder on each bank. VCM-3, on the direct-injected J35Y engines from around 2013–2014 onward, went back to 3 or 6. The harness works the same way on all of them, since each version waits for the engine to be warm before switching.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eScan for codes and fix any existing misfire, oil-consumption or sensor problem first. A harness that changes the ECT1 reading will not cure a failing sensor or a cooling-system fault, and an engine that already fouls plugs on one bank needs inspection. Watch coolant level and the temperature gauge as you would normally.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model and year match a row above (2007–2026 Honda Ridgeline).\u003c\/li\u003e\n\u003cli\u003eYour vehicle has the V6 with VCM described in the notes above (not a four-cylinder, hybrid or turbo model).\u003c\/li\u003e\n\u003cli\u003eThe connector at your ECT1 sensor matches the product photos.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, aftermarket ECUs or modified wiring need a fitment check from support first.\u003c\/li\u003e\n\u003cli\u003eUnsure? Send your VIN to support@automotivebypass.com.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table\u003c\/h2\u003e\u003cp\u003eEach listed year, as recorded in the fitment data (see the engine notes for VCM by year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2026\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eRidgeline\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWork only when the engine is cold.\u003c\/li\u003e\n\u003cli\u003eTurn the ignition off.\u003c\/li\u003e\n\u003cli\u003eFind the ECT1 sensor shown in your instructions.\u003c\/li\u003e\n\u003cli\u003eCheck the connector shape against the harness.\u003c\/li\u003e\n\u003cli\u003eChoose the listed setting.\u003c\/li\u003e\n\u003cli\u003eFit and latch the harness, then secure it with ties.\u003c\/li\u003e\n\u003cli\u003eDrive until fully warm and check that light cruise stays smooth with no warning lights.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eECT1:\u003c\/strong\u003e Engine coolant temperature sensor 1, the input this harness works on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThermistor:\u003c\/strong\u003e A sensor whose resistance changes with temperature; coolant sensors drop in resistance as the engine warms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eACM:\u003c\/strong\u003e Active Control Engine Mount, used by Honda to counter vibration in reduced-cylinder mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJ35:\u003c\/strong\u003e Honda's 3.5L V6 engine family; suffixes such as Z4 or Y6 identify the version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVTEC:\u003c\/strong\u003e Honda's variable valve system; VCM uses its rocker-arm mechanism to keep valves closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM:\u003c\/strong\u003e Variable Cylinder Management, Honda's cylinder deactivation system on 3.5L V6 engines.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light after fitting:\u003c\/strong\u003e Restore the factory connection, scan the code and send it with the VIN and setting to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill switching to fewer cylinders:\u003c\/strong\u003e Re-check that the harness is on the correct sensor and fully latched.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGauge behavior changed:\u003c\/strong\u003e Contact support before continuing to drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVibration persists on six cylinders:\u003c\/strong\u003e Have the engine mounts and drivetrain checked.\u003c\/p\u003e\u003ch2\u003eHow Honda handled VCM vibration\u003c\/h2\u003e\u003cp\u003eWhen Honda launched VCM on the 2005 Odyssey, it paired the system with Active Control Engine Mounts and Active Noise Control. The mounts counter the different vibration pattern of three-cylinder operation, and the audio system plays a cancelling signal through the speakers to reduce boom in the cabin. As mounts age or a speaker or microphone fails, those countermeasures work less well, and owners start to feel or hear the switch into reduced-cylinder mode.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eCan I return to factory VCM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the harness and reconnect the factory connector to the sensor.\u003c\/p\u003e\u003ch3\u003eWhich Honda Ridgeline years are listed?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Honda Ridgeline 2007–2026. VCM fitment also depends on engine and trim, so check the notes on this page.\u003c\/p\u003e\u003ch3\u003eDoes this VCM harness plug into the OBD-II port on the Honda Ridgeline?\u003c\/h3\u003e\u003cp\u003eNo. It connects inline at the ECT1 coolant temperature sensor connector.\u003c\/p\u003e\u003ch3\u003eWhat do the 68Ω, 82Ω, 100Ω and 120Ω settings mean?\u003c\/h3\u003e\u003cp\u003eThey are resistance values added to the ECT1 signal, not power levels. Use the setting the instructions give for your vehicle.\u003c\/p\u003e\u003ch3\u003eWill it fix oil consumption or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Diagnose and repair existing faults first. The harness only prevents VCM from engaging.\u003c\/p\u003e\u003ch3\u003eDoes fuel economy change?\u003c\/h3\u003e\u003cp\u003eUsually a little at light-load cruising, because that is where VCM saved fuel. Acceleration and full-throttle driving always ran on six cylinders.\u003c\/p\u003e\u003ch3\u003eWhich resistance setting should I use?\u003c\/h3\u003e\u003cp\u003eStart with the setting the instructions list for your model. If a check-engine light appears, unplug the harness, read the code and contact support with the VIN and the code.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all six cylinders active. Power at full throttle is unchanged because VCM is not active at full throttle.\u003c\/p\u003e\u003ch3\u003eIs it the same as an OBD-II VCM device or a tune?\u003c\/h3\u003e\u003cp\u003eNo. OBD-II devices and software tunes work through the engine computer. This harness only changes the ECT1 sensor signal and leaves the software untouched.\u003c\/p\u003e\u003ch3\u003eDoes it work on four-cylinder, hybrid or turbo models?\u003c\/h3\u003e\u003cp\u003eNo. Those engines do not use VCM. The harness is for the 3.5L V6 VCM engines described on this page.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493788135796,"sku":"RC-VCM-01-02","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-VCM-01-02-1.jpg?v=1793172653"},{"product_id":"afm-dfm-vcm-disabler-honda-accord-2008-2017-v6-vcm-disabler","title":"Honda Accord 2008-2017 V6 VCM Disabler Harness","description":"\u003cp\u003eThis harness keeps the 3.5L V6 in the 2008–2017 Honda Accord running on all six cylinders. It plugs in between the ECT1 coolant temperature sensor and its connector and offers four resistance settings (68Ω, 82Ω, 100Ω and 120Ω) for the ECT1 signal.\u003c\/p\u003e\u003cp\u003eIt is fully reversible and leaves the engine computer untouched.\u003c\/p\u003e\u003ch2\u003eVehicles and years\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match for this harness:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda Accord: 2008–2017\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eOn the Accord, VCM came with the V6 and automatic transmission from 2008 through 2017: VCM-2 on 2008–2012 models, VCM-3 (J35Y1) on 2013–2017 models. The 6-speed manual V6 coupe does not have VCM.\u003c\/p\u003e\u003cp\u003eIf your vehicle's engine or trim is not one of the VCM versions described here, send the VIN to support before ordering.\u003c\/p\u003e\u003ch2\u003eHow the factory system decides\u003c\/h2\u003e\u003cp\u003eHonda introduced VCM on the 2005 Odyssey. It shuts down the rear bank of the V6 during cruising and deceleration by disabling those valves through the VTEC system and stopping fuel delivery. Later versions added a 4-cylinder mode, and the newest go back to 3 or 6. Each switch is timed by the engine computer using speed, load, gear and temperature inputs.\u003c\/p\u003e\u003ch2\u003eWhat the resistance settings do\u003c\/h2\u003e\u003cp\u003eBecause VCM is held off until the engine is warm, the coolant temperature input is the cleanest point to control it without touching software. The harness places a selectable resistor in the ECT1 signal circuit. Higher values shift the reading further. Pick the setting listed for your model in the instructions rather than going straight to the highest value.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eThe change is most noticeable at steady cruising speed on a warm engine, where VCM previously cut in. With the harness installed, that mode change should no longer happen. Acceleration and full-throttle behavior are the same as before. If a check-engine light appears, recheck the connections and the resistance setting against the instructions, then contact support with the code.\u003c\/p\u003e\u003ch2\u003eCommon reasons to disable VCM\u003c\/h2\u003e\u003cp\u003eOwners usually want three things: no shudder at steady cruise, smoother behavior at the moderate, steady speeds where VCM switches most, and fewer worries about oil getting past the rings on the idle bank. The harness gives consistent six-cylinder operation. It does not add power and it is not a repair for an engine that already burns oil or misfires.\u003c\/p\u003e\u003ch2\u003eVCM generations at a glance\u003c\/h2\u003e\u003cp\u003eThere are three main VCM versions: VCM-1 (3 or 6 cylinders), VCM-2 (3, 4 or 6 cylinders) and VCM-3 (3 or 6 cylinders, on the later direct-injection J35Y engines). The version depends on model year, and the notes above show which applies to each covered generation. Since all of them rely on the engine computer's temperature checks, the ECT1 approach applies across the range.\u003c\/p\u003e\u003ch2\u003eConnecting the harness\u003c\/h2\u003e\u003cp\u003eWith the engine cold and the ignition off, unplug the factory connector from the ECT1 sensor, plug the harness into the sensor, and plug the factory connector into the harness. Set the resistance selector to the value the instructions list, secure the harness away from the exhaust, belts and fan, and start the engine. The connection is inline, not at the OBD-II port. To remove it, reconnect the factory plug directly to the sensor.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eScan for codes and fix any existing misfire, oil-consumption or sensor problem first. A harness that changes the ECT1 reading will not cure a failing sensor or a cooling-system fault, and an engine that already fouls plugs on one bank needs inspection. Watch coolant level and the temperature gauge as you would normally.\u003c\/p\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model and year match a row above (2008–2017 Honda Accord).\u003c\/li\u003e\n\u003cli\u003eYour vehicle has the V6 with VCM described in the notes above (not a four-cylinder, hybrid or turbo model).\u003c\/li\u003e\n\u003cli\u003eThe connector at your ECT1 sensor matches the product photos.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, aftermarket ECUs or modified wiring need a fitment check from support first.\u003c\/li\u003e\n\u003cli\u003eUnsure? Send your VIN to support@automotivebypass.com.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table\u003c\/h2\u003e\u003cp\u003eOne row per model year from the fitment data. Check the generation notes above for years without VCM:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eAccord\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore you install\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCold engine, ignition off.\u003c\/li\u003e\n\u003cli\u003eInstructions for your model at hand.\u003c\/li\u003e\n\u003cli\u003eECT1 sensor found and its connector compared with the photos.\u003c\/li\u003e\n\u003cli\u003eResistance selector set as the instructions specify.\u003c\/li\u003e\n\u003cli\u003eHarness fitted between sensor and factory plug, both latches engaged.\u003c\/li\u003e\n\u003cli\u003eLead secured away from the exhaust and drive belts.\u003c\/li\u003e\n\u003cli\u003eRoad test: warm engine, light cruise, watch for warning lights.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA code is set:\u003c\/strong\u003e Remove the harness, reconnect the original plug and email support with the code, VIN and setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM not disabled:\u003c\/strong\u003e Check the sensor location and latches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGauge reads oddly:\u003c\/strong\u003e Ask support before further driving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShudder continues:\u003c\/strong\u003e Look at the engine mounts; the harness only controls VCM.\u003c\/p\u003e\u003ch2\u003eWhy VCM can be felt\u003c\/h2\u003e\u003cp\u003eHonda knew three-cylinder mode would feel different, so VCM vehicles use Active Control Engine Mounts and an Active Noise Control system that cancels low-frequency cabin noise through the speakers. Both were introduced with VCM on the 2005 Odyssey. If either is worn or faulty, VCM transitions become easier to feel, which is a frequent reason owners look for a disabler.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eECT1:\u003c\/strong\u003e Engine coolant temperature sensor 1, the input this harness works on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM:\u003c\/strong\u003e Variable Cylinder Management, Honda's cylinder deactivation system on 3.5L V6 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThermistor:\u003c\/strong\u003e A sensor whose resistance changes with temperature; coolant sensors drop in resistance as the engine warms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJ35:\u003c\/strong\u003e Honda's 3.5L V6 engine family; suffixes such as Z4 or Y6 identify the version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVTEC:\u003c\/strong\u003e Honda's variable valve system; VCM uses its rocker-arm mechanism to keep valves closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eACM:\u003c\/strong\u003e Active Control Engine Mount, used by Honda to counter vibration in reduced-cylinder mode.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWhich Honda Accord years are listed?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Honda Accord 2008–2017. VCM fitment also depends on engine and trim, so check the notes on this page.\u003c\/p\u003e\u003ch3\u003eWhat do the 68Ω, 82Ω, 100Ω and 120Ω settings mean?\u003c\/h3\u003e\u003cp\u003eThey are resistance values added to the ECT1 signal, not power levels. Use the setting the instructions give for your vehicle.\u003c\/p\u003e\u003ch3\u003eWill it fix oil consumption or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Diagnose and repair existing faults first. The harness only prevents VCM from engaging.\u003c\/p\u003e\u003ch3\u003eDoes this VCM harness plug into the OBD-II port on the Honda Accord?\u003c\/h3\u003e\u003cp\u003eNo. It connects inline at the ECT1 coolant temperature sensor connector.\u003c\/p\u003e\u003ch3\u003eCan I return to factory VCM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the harness and reconnect the factory connector to the sensor.\u003c\/p\u003e\u003ch3\u003eWhich resistance setting should I use?\u003c\/h3\u003e\u003cp\u003eStart with the setting the instructions list for your model. If a check-engine light appears, unplug the harness, read the code and contact support with the VIN and the code.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all six cylinders active. Power at full throttle is unchanged because VCM is not active at full throttle.\u003c\/p\u003e\u003ch3\u003eDoes fuel economy change?\u003c\/h3\u003e\u003cp\u003eUsually a little at light-load cruising, because that is where VCM saved fuel. Acceleration and full-throttle driving always ran on six cylinders.\u003c\/p\u003e\u003ch3\u003eDoes it work on four-cylinder, hybrid or turbo models?\u003c\/h3\u003e\u003cp\u003eNo. Those engines do not use VCM. The harness is for the 3.5L V6 VCM engines described on this page.\u003c\/p\u003e\u003ch3\u003eIs it the same as an OBD-II VCM device or a tune?\u003c\/h3\u003e\u003cp\u003eNo. OBD-II devices and software tunes work through the engine computer. This harness only changes the ECT1 sensor signal and leaves the software untouched.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493788168564,"sku":"RC-VCM-01-03","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-VCM-01-03-1.jpg?v=1793172662"},{"product_id":"afm-dfm-vcm-disabler-honda-pilot-2009-2026-vcm-disabler","title":"Honda Pilot 2009-2026 VCM Disabler Harness","description":"\u003cp\u003eFor the 2015–2026 Honda Pilot: an inline ECT1 harness that stops Variable Cylinder Management from engaging. No OBD-II plug, no software change. It sits between the coolant temperature sensor and the factory connector, with four resistance settings to match the vehicle.\u003c\/p\u003e\u003cp\u003eIt is fully reversible and leaves the engine computer untouched.\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eListed applications (100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda Pilot: 2015–2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePilot generations and their VCM: 2009–2015 J35Z4 with VCM-2 (3, 4 or 6 cylinders), 2016–2022 J35Y6 with VCM-3 (3 or 6 cylinders), and 2023-on J35Y8 with a newer 3\/6-cylinder VCM.\u003c\/p\u003e\u003cp\u003eEngine generations above come from Honda and published engine references; check your VIN against them before ordering.\u003c\/p\u003e\u003ch2\u003eHow Honda VCM works\u003c\/h2\u003e\u003cp\u003eVCM uses the VTEC rocker-arm system to keep the intake and exhaust valves closed on one bank of cylinders and cuts fuel to them at the same time. Honda chose the rear bank, which is why owners describe the engine as running on three cylinders while cruising. Honda says the system looks at throttle position, vehicle speed, engine speed, gear selection and engine oil temperature before it switches, and brings all six cylinders back as soon as more torque is needed.\u003c\/p\u003e\u003ch2\u003eHow the harness works\u003c\/h2\u003e\u003cp\u003eThe engine computer will not switch to VCM until coolant temperature is in range. The ECT1 sensor reports that temperature as a resistance that drops as the engine heats up. This harness adds resistance in series, so the computer sees a slightly lower temperature than the actual one and keeps the engine in six-cylinder mode. The 68Ω, 82Ω, 100Ω and 120Ω settings are resistance values, not power levels; the supplied guide tells you which one to start with.\u003c\/p\u003e\u003ch2\u003eFitting it\u003c\/h2\u003e\u003cp\u003eWith the engine cold and the ignition off, unplug the factory connector from the ECT1 sensor, plug the harness into the sensor, and plug the factory connector into the harness. Set the resistance selector to the value the instructions list, secure the harness away from the exhaust, belts and fan, and start the engine. The connection is inline, not at the OBD-II port. To remove it, reconnect the factory plug directly to the sensor.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eThe change is most noticeable at steady cruising speed on a warm engine, where VCM previously cut in. With the harness installed, that mode change should no longer happen. Acceleration and full-throttle behavior are the same as before. If a check-engine light appears, recheck the connections and the resistance setting against the instructions, then contact support with the code.\u003c\/p\u003e\u003ch2\u003eWhy owners turn VCM off\u003c\/h2\u003e\u003cp\u003eOwners usually want three things: no shudder at steady cruise, smoother behavior at the moderate, steady speeds where VCM switches most, and fewer worries about oil getting past the rings on the idle bank. The harness gives consistent six-cylinder operation. It does not add power and it is not a repair for an engine that already burns oil or misfires.\u003c\/p\u003e\u003ch2\u003eThree versions of VCM\u003c\/h2\u003e\u003cp\u003eThere are three main VCM versions: VCM-1 (3 or 6 cylinders), VCM-2 (3, 4 or 6 cylinders) and VCM-3 (3 or 6 cylinders, on the later direct-injection J35Y engines). The version depends on model year, and the notes above show which applies to each covered generation. Since all of them rely on the engine computer's temperature checks, the ECT1 approach applies across the range.\u003c\/p\u003e\u003ch2\u003eBefore you install\u003c\/h2\u003e\u003cp\u003eScan for codes and fix any existing misfire, oil-consumption or sensor problem first. A harness that changes the ECT1 reading will not cure a failing sensor or a cooling-system fault, and an engine that already fouls plugs on one bank needs inspection. Watch coolant level and the temperature gauge as you would normally.\u003c\/p\u003e\u003ch2\u003eCheck before you order\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model and year match a row above (2015–2026 Honda Pilot).\u003c\/li\u003e\n\u003cli\u003eYour vehicle has the V6 with VCM described in the notes above (not a four-cylinder, hybrid or turbo model).\u003c\/li\u003e\n\u003cli\u003eThe connector at your ECT1 sensor matches the product photos.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, aftermarket ECUs or modified wiring need a fitment check from support first.\u003c\/li\u003e\n\u003cli\u003eUnsure? Send your VIN to support@automotivebypass.com.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table\u003c\/h2\u003e\u003cp\u003eOne row per model year from the fitment data. Check the generation notes above for years without VCM:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2026\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003ePilot\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLet the engine cool completely; the ECT1 sensor sits in the cooling system.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off.\u003c\/li\u003e\n\u003cli\u003eLocate the ECT1 sensor using the instructions for your model.\u003c\/li\u003e\n\u003cli\u003eCompare its connector with the harness plugs.\u003c\/li\u003e\n\u003cli\u003eSet the resistance selector to the value listed for your model.\u003c\/li\u003e\n\u003cli\u003eFit the harness, check that both locks click and tie the lead clear of hot or moving parts.\u003c\/li\u003e\n\u003cli\u003eStart the engine, check for warning lights, then drive until fully warm and cruise lightly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eECT1:\u003c\/strong\u003e Engine coolant temperature sensor 1, the input this harness works on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM:\u003c\/strong\u003e Variable Cylinder Management, Honda's cylinder deactivation system on 3.5L V6 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJ35:\u003c\/strong\u003e Honda's 3.5L V6 engine family; suffixes such as Z4 or Y6 identify the version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eACM:\u003c\/strong\u003e Active Control Engine Mount, used by Honda to counter vibration in reduced-cylinder mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVTEC:\u003c\/strong\u003e Honda's variable valve system; VCM uses its rocker-arm mechanism to keep valves closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThermistor:\u003c\/strong\u003e A sensor whose resistance changes with temperature; coolant sensors drop in resistance as the engine warms.\u003c\/p\u003e\u003ch2\u003eHonda's countermeasures\u003c\/h2\u003e\u003cp\u003eHonda knew three-cylinder mode would feel different, so VCM vehicles use Active Control Engine Mounts and an Active Noise Control system that cancels low-frequency cabin noise through the speakers. Both were introduced with VCM on the 2005 Odyssey. If either is worn or faulty, VCM transitions become easier to feel, which is a frequent reason owners look for a disabler.\u003c\/p\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light:\u003c\/strong\u003e Unplug the harness, reconnect the factory plug, read the code and contact support with the code, the VIN and the setting used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM still engages:\u003c\/strong\u003e Confirm both connectors are latched and the harness is on the ECT1 sensor named in the instructions, then check the setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTemperature gauge reads differently:\u003c\/strong\u003e Stop and check the instructions for your model; contact support before driving further.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVibration remains:\u003c\/strong\u003e If the engine stays on six cylinders and vibration continues, inspect engine mounts and other causes.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWill it fix oil consumption or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Diagnose and repair existing faults first. The harness only prevents VCM from engaging.\u003c\/p\u003e\u003ch3\u003eWhich Honda Pilot years are listed?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Honda Pilot 2015–2026. VCM fitment also depends on engine and trim, so check the notes on this page.\u003c\/p\u003e\u003ch3\u003eWhat do the 68Ω, 82Ω, 100Ω and 120Ω settings mean?\u003c\/h3\u003e\u003cp\u003eThey are resistance values added to the ECT1 signal, not power levels. Use the setting the instructions give for your vehicle.\u003c\/p\u003e\u003ch3\u003eDoes this VCM harness plug into the OBD-II port on the Honda Pilot?\u003c\/h3\u003e\u003cp\u003eNo. It connects inline at the ECT1 coolant temperature sensor connector.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all six cylinders active. Power at full throttle is unchanged because VCM is not active at full throttle.\u003c\/p\u003e\u003ch3\u003eCan I return to factory VCM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the harness and reconnect the factory connector to the sensor.\u003c\/p\u003e\u003ch3\u003eIs it the same as an OBD-II VCM device or a tune?\u003c\/h3\u003e\u003cp\u003eNo. OBD-II devices and software tunes work through the engine computer. This harness only changes the ECT1 sensor signal and leaves the software untouched.\u003c\/p\u003e\u003ch3\u003eDoes it work on four-cylinder, hybrid or turbo models?\u003c\/h3\u003e\u003cp\u003eNo. Those engines do not use VCM. The harness is for the 3.5L V6 VCM engines described on this page.\u003c\/p\u003e\u003ch3\u003eWhich resistance setting should I use?\u003c\/h3\u003e\u003cp\u003eStart with the setting the instructions list for your model. If a check-engine light appears, unplug the harness, read the code and contact support with the VIN and the code.\u003c\/p\u003e\u003ch3\u003eDoes fuel economy change?\u003c\/h3\u003e\u003cp\u003eUsually a little at light-load cruising, because that is where VCM saved fuel. Acceleration and full-throttle driving always ran on six cylinders.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493788397940,"sku":"RC-VCM-01-04","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-VCM-01-04-1.jpg?v=1793172674"},{"product_id":"afm-dfm-vcm-disabler-acura-rdx-2013-2018-vcm-disabler","title":"Acura RDX 2013-2018 VCM Disabler Harness","description":"\u003cp\u003eFor the 2013–2018 Acura RDX: an inline ECT1 harness that stops Variable Cylinder Management from engaging. No OBD-II plug, no software change. It sits between the coolant temperature sensor and the factory connector, with four resistance settings to match the vehicle.\u003c\/p\u003e\u003cp\u003eThe factory system is not reprogrammed, and the harness comes out by unplugging it.\u003c\/p\u003e\u003ch2\u003eCovered model years\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match for this harness:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAcura RDX: 2013–2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAcura moved the RDX to a 3.5L V6 with VCM for the 2013 model year. That engine runs through 2018, when the RDX changed to a turbocharged four-cylinder without VCM.\u003c\/p\u003e\u003cp\u003eIf your vehicle's engine or trim is not one of the VCM versions described here, send the VIN to support before ordering.\u003c\/p\u003e\u003ch2\u003eHow the factory system decides\u003c\/h2\u003e\u003cp\u003eAt light load, Honda's VCM idles one bank of cylinders. A synchronizing piston inside the rocker assembly disconnects the rocker arms for those cylinders from the cam, so their valves stay shut, and their injectors stop. Depending on generation, the engine runs on 3, 4 or 6 cylinders. The engine computer only allows this when its temperature and load conditions are met.\u003c\/p\u003e\u003ch2\u003eHow the harness works\u003c\/h2\u003e\u003cp\u003eThe engine computer will not switch to VCM until coolant temperature is in range. The ECT1 sensor reports that temperature as a resistance that drops as the engine heats up. This harness adds resistance in series, so the computer sees a slightly lower temperature than the actual one and keeps the engine in six-cylinder mode. The 68Ω, 82Ω, 100Ω and 120Ω settings are resistance values, not power levels; the supplied guide tells you which one to start with.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eDrive the vehicle until it is fully warm and cruise at a steady, light throttle, which is where VCM used to engage. The engine should stay on six cylinders, so the vibration or hum that came with three-cylinder mode should not return. Keep an eye on the temperature gauge for the first few drives and confirm no warning lights appear. Expect light-load fuel economy to be a little lower than before.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eWork only on a cold engine. Locate the ECT1 sensor shown in the instructions for your model, release the connector lock, and fit the harness between the sensor and the factory plug. Choose the specified setting, tie the harness clear of hot or moving parts, and road-test. Nothing is cut or spliced, so the original setup can be restored at any time.\u003c\/p\u003e\u003ch2\u003eWhy owners turn VCM off\u003c\/h2\u003e\u003cp\u003eThe complaints that bring most owners here are vibration or a hum through the cabin when VCM is active, a slight jerk at low speed when cylinders come back online, and concern about oil and spark-plug fouling on the deactivated bank. Keeping all six cylinders running removes the mode changes. Light-load fuel economy will usually drop somewhat, because that is where VCM saves fuel.\u003c\/p\u003e\u003ch2\u003eThree versions of VCM\u003c\/h2\u003e\u003cp\u003eThere are three main VCM versions: VCM-1 (3 or 6 cylinders), VCM-2 (3, 4 or 6 cylinders) and VCM-3 (3 or 6 cylinders, on the later direct-injection J35Y engines). The version depends on model year, and the notes above show which applies to each covered generation. Since all of them rely on the engine computer's temperature checks, the ECT1 approach applies across the range.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eScan for codes and fix any existing misfire, oil-consumption or sensor problem first. A harness that changes the ECT1 reading will not cure a failing sensor or a cooling-system fault, and an engine that already fouls plugs on one bank needs inspection. Watch coolant level and the temperature gauge as you would normally.\u003c\/p\u003e\u003ch2\u003eCheck before you order\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model and year match a row above (2013–2018 Acura RDX).\u003c\/li\u003e\n\u003cli\u003eYour vehicle has the V6 with VCM described in the notes above (not a four-cylinder, hybrid or turbo model).\u003c\/li\u003e\n\u003cli\u003eThe connector at your ECT1 sensor matches the product photos.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, aftermarket ECUs or modified wiring need a fitment check from support first.\u003c\/li\u003e\n\u003cli\u003eUnsure? Send your VIN to support@automotivebypass.com.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per model year from the fitment data. Check the generation notes above for years without VCM:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eRDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eRDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eRDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eRDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eRDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eRDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eACM:\u003c\/strong\u003e Active Control Engine Mount, used by Honda to counter vibration in reduced-cylinder mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM:\u003c\/strong\u003e Variable Cylinder Management, Honda's cylinder deactivation system on 3.5L V6 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eECT1:\u003c\/strong\u003e Engine coolant temperature sensor 1, the input this harness works on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVTEC:\u003c\/strong\u003e Honda's variable valve system; VCM uses its rocker-arm mechanism to keep valves closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThermistor:\u003c\/strong\u003e A sensor whose resistance changes with temperature; coolant sensors drop in resistance as the engine warms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJ35:\u003c\/strong\u003e Honda's 3.5L V6 engine family; suffixes such as Z4 or Y6 identify the version.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light:\u003c\/strong\u003e Unplug the harness, reconnect the factory plug, read the code and contact support with the code, the VIN and the setting used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM still engages:\u003c\/strong\u003e Confirm both connectors are latched and the harness is on the ECT1 sensor named in the instructions, then check the setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTemperature gauge reads differently:\u003c\/strong\u003e Stop and check the instructions for your model; contact support before driving further.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVibration remains:\u003c\/strong\u003e If the engine stays on six cylinders and vibration continues, inspect engine mounts and other causes.\u003c\/p\u003e\u003ch2\u003eHonda's countermeasures\u003c\/h2\u003e\u003cp\u003eWhen Honda launched VCM on the 2005 Odyssey, it paired the system with Active Control Engine Mounts and Active Noise Control. The mounts counter the different vibration pattern of three-cylinder operation, and the audio system plays a cancelling signal through the speakers to reduce boom in the cabin. As mounts age or a speaker or microphone fails, those countermeasures work less well, and owners start to feel or hear the switch into reduced-cylinder mode.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCold engine, ignition off.\u003c\/li\u003e\n\u003cli\u003eInstructions for your model at hand.\u003c\/li\u003e\n\u003cli\u003eECT1 sensor found and its connector compared with the photos.\u003c\/li\u003e\n\u003cli\u003eResistance selector set as the instructions specify.\u003c\/li\u003e\n\u003cli\u003eHarness fitted between sensor and factory plug, both latches engaged.\u003c\/li\u003e\n\u003cli\u003eLead secured away from the exhaust and drive belts.\u003c\/li\u003e\n\u003cli\u003eRoad test: warm engine, light cruise, watch for warning lights.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWill it fix oil consumption or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Diagnose and repair existing faults first. The harness only prevents VCM from engaging.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all six cylinders active. Power at full throttle is unchanged because VCM is not active at full throttle.\u003c\/p\u003e\u003ch3\u003eDoes this VCM harness plug into the OBD-II port on the Acura RDX?\u003c\/h3\u003e\u003cp\u003eNo. It connects inline at the ECT1 coolant temperature sensor connector.\u003c\/p\u003e\u003ch3\u003eWhat do the 68Ω, 82Ω, 100Ω and 120Ω settings mean?\u003c\/h3\u003e\u003cp\u003eThey are resistance values added to the ECT1 signal, not power levels. Use the setting the instructions give for your vehicle.\u003c\/p\u003e\u003ch3\u003eWhich Acura RDX years are listed?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Acura RDX 2013–2018. VCM fitment also depends on engine and trim, so check the notes on this page.\u003c\/p\u003e\u003ch3\u003eDoes it work on four-cylinder, hybrid or turbo models?\u003c\/h3\u003e\u003cp\u003eNo. Those engines do not use VCM. The harness is for the 3.5L V6 VCM engines described on this page.\u003c\/p\u003e\u003ch3\u003eWhich resistance setting should I use?\u003c\/h3\u003e\u003cp\u003eStart with the setting the instructions list for your model. If a check-engine light appears, unplug the harness, read the code and contact support with the VIN and the code.\u003c\/p\u003e\u003ch3\u003eCan I return to factory VCM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the harness and reconnect the factory connector to the sensor.\u003c\/p\u003e\u003ch3\u003eDoes fuel economy change?\u003c\/h3\u003e\u003cp\u003eUsually a little at light-load cruising, because that is where VCM saved fuel. Acceleration and full-throttle driving always ran on six cylinders.\u003c\/p\u003e\u003ch3\u003eIs it the same as an OBD-II VCM device or a tune?\u003c\/h3\u003e\u003cp\u003eNo. OBD-II devices and software tunes work through the engine computer. This harness only changes the ECT1 sensor signal and leaves the software untouched.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493788725620,"sku":"RC-VCM-01-05","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-VCM-01-05-1.jpg?v=1793172681"},{"product_id":"afm-dfm-vcm-disabler-acura-mdx-2014-2020-2022-2026-vcm-disabler","title":"Acura MDX 3.5L V6 VCM Disabler Harness – 2014-2020 Non-Hybrid \u0026 2022-2026 Non-Type S","description":"\u003cp\u003eFor the 2014–2020, 2022–2026 Acura MDX: an inline ECT1 harness that stops Variable Cylinder Management from engaging. No OBD-II plug, no software change. It sits between the coolant temperature sensor and the factory connector, with four resistance settings to match the vehicle.\u003c\/p\u003e\u003cp\u003eThe factory system is not reprogrammed, and the harness comes out by unplugging it.\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eListed applications (100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAcura MDX: 2014–2020, 2022–2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 2014 redesign brought the MDX a direct-injected 3.5L V6 (J35Y5) with VCM-3 (3- or 6-cylinder operation). This listing covers the non-hybrid 3.5L models only; the Sport Hybrid and the turbocharged Type S use different powertrains.\u003c\/p\u003e\u003cp\u003eEngine generations above come from Honda and published engine references; check your VIN against them before ordering.\u003c\/p\u003e\u003ch2\u003eHow the factory system decides\u003c\/h2\u003e\u003cp\u003eAt light load, Honda's VCM idles one bank of cylinders. A synchronizing piston inside the rocker assembly disconnects the rocker arms for those cylinders from the cam, so their valves stay shut, and their injectors stop. Depending on generation, the engine runs on 3, 4 or 6 cylinders. The engine computer only allows this when its temperature and load conditions are met.\u003c\/p\u003e\u003ch2\u003eInside the harness\u003c\/h2\u003e\u003cp\u003eThe engine computer will not switch to VCM until coolant temperature is in range. The ECT1 sensor reports that temperature as a resistance that drops as the engine heats up. This harness adds resistance in series, so the computer sees a slightly lower temperature than the actual one and keeps the engine in six-cylinder mode. The 68Ω, 82Ω, 100Ω and 120Ω settings are resistance values, not power levels; the supplied guide tells you which one to start with.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThe harness has a sensor-side plug and a vehicle-side plug. Fit it with the engine off and cool, confirm both locks click, select the resistance value from the instructions, and route the lead away from heat and moving parts. Removal is the reverse.\u003c\/p\u003e\u003ch2\u003eWhich VCM your engine has\u003c\/h2\u003e\u003cp\u003eHonda has used several versions of VCM. The first (2005–2007 Odyssey, early Pilot 2WD) switched between 3 and 6 cylinders. VCM-2, used on many 2008–2015 engines, added a 4-cylinder mode that idles one cylinder on each bank. VCM-3, on the direct-injected J35Y engines from around 2013–2014 onward, went back to 3 or 6. The harness works the same way on all of them, since each version waits for the engine to be warm before switching.\u003c\/p\u003e\u003ch2\u003eCommon reasons to disable VCM\u003c\/h2\u003e\u003cp\u003eOwners usually want three things: no shudder at steady cruise, smoother behavior at the moderate, steady speeds where VCM switches most, and fewer worries about oil getting past the rings on the idle bank. The harness gives consistent six-cylinder operation. It does not add power and it is not a repair for an engine that already burns oil or misfires.\u003c\/p\u003e\u003ch2\u003eWhat to expect\u003c\/h2\u003e\u003cp\u003eThe change is most noticeable at steady cruising speed on a warm engine, where VCM previously cut in. With the harness installed, that mode change should no longer happen. Acceleration and full-throttle behavior are the same as before. If a check-engine light appears, recheck the connections and the resistance setting against the instructions, then contact support with the code.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eStart with a healthy engine: no check-engine light, coolant at the correct level, a thermostat that opens normally and no misfire history. The harness relies on a working ECT1 sensor; if that sensor is faulty, replace it before installing the harness.\u003c\/p\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model and year match a row above (2014–2020, 2022–2026 Acura MDX).\u003c\/li\u003e\n\u003cli\u003eYour vehicle has the V6 with VCM described in the notes above (not a four-cylinder, hybrid or turbo model).\u003c\/li\u003e\n\u003cli\u003eThe connector at your ECT1 sensor matches the product photos.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, aftermarket ECUs or modified wiring need a fitment check from support first.\u003c\/li\u003e\n\u003cli\u003eUnsure? Send your VIN to support@automotivebypass.com.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table\u003c\/h2\u003e\u003cp\u003eOne row per model year from the fitment data. Check the generation notes above for years without VCM:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2026\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eMDX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eACM:\u003c\/strong\u003e Active Control Engine Mount, used by Honda to counter vibration in reduced-cylinder mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJ35:\u003c\/strong\u003e Honda's 3.5L V6 engine family; suffixes such as Z4 or Y6 identify the version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThermistor:\u003c\/strong\u003e A sensor whose resistance changes with temperature; coolant sensors drop in resistance as the engine warms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVTEC:\u003c\/strong\u003e Honda's variable valve system; VCM uses its rocker-arm mechanism to keep valves closed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM:\u003c\/strong\u003e Variable Cylinder Management, Honda's cylinder deactivation system on 3.5L V6 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eECT1:\u003c\/strong\u003e Engine coolant temperature sensor 1, the input this harness works on.\u003c\/p\u003e\u003ch2\u003eBefore you install\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLet the engine cool completely; the ECT1 sensor sits in the cooling system.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off.\u003c\/li\u003e\n\u003cli\u003eLocate the ECT1 sensor using the instructions for your model.\u003c\/li\u003e\n\u003cli\u003eCompare its connector with the harness plugs.\u003c\/li\u003e\n\u003cli\u003eSet the resistance selector to the value listed for your model.\u003c\/li\u003e\n\u003cli\u003eFit the harness, check that both locks click and tie the lead clear of hot or moving parts.\u003c\/li\u003e\n\u003cli\u003eStart the engine, check for warning lights, then drive until fully warm and cruise lightly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Honda handled VCM vibration\u003c\/h2\u003e\u003cp\u003eWhen Honda launched VCM on the 2005 Odyssey, it paired the system with Active Control Engine Mounts and Active Noise Control. The mounts counter the different vibration pattern of three-cylinder operation, and the audio system plays a cancelling signal through the speakers to reduce boom in the cabin. As mounts age or a speaker or microphone fails, those countermeasures work less well, and owners start to feel or hear the switch into reduced-cylinder mode.\u003c\/p\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light:\u003c\/strong\u003e Unplug the harness, reconnect the factory plug, read the code and contact support with the code, the VIN and the setting used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM still engages:\u003c\/strong\u003e Confirm both connectors are latched and the harness is on the ECT1 sensor named in the instructions, then check the setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTemperature gauge reads differently:\u003c\/strong\u003e Stop and check the instructions for your model; contact support before driving further.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVibration remains:\u003c\/strong\u003e If the engine stays on six cylinders and vibration continues, inspect engine mounts and other causes.\u003c\/p\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eCan I return to factory VCM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the harness and reconnect the factory connector to the sensor.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all six cylinders active. Power at full throttle is unchanged because VCM is not active at full throttle.\u003c\/p\u003e\u003ch3\u003eDoes this VCM harness plug into the OBD-II port on the Acura MDX?\u003c\/h3\u003e\u003cp\u003eNo. It connects inline at the ECT1 coolant temperature sensor connector.\u003c\/p\u003e\u003ch3\u003eWhich Acura MDX years are listed?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Acura MDX 2014–2020, 2022–2026. VCM fitment also depends on engine and trim, so check the notes on this page.\u003c\/p\u003e\u003ch3\u003eWhat do the 68Ω, 82Ω, 100Ω and 120Ω settings mean?\u003c\/h3\u003e\u003cp\u003eThey are resistance values added to the ECT1 signal, not power levels. Use the setting the instructions give for your vehicle.\u003c\/p\u003e\u003ch3\u003eWill it fix oil consumption or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Diagnose and repair existing faults first. The harness only prevents VCM from engaging.\u003c\/p\u003e\u003ch3\u003eDoes fuel economy change?\u003c\/h3\u003e\u003cp\u003eUsually a little at light-load cruising, because that is where VCM saved fuel. Acceleration and full-throttle driving always ran on six cylinders.\u003c\/p\u003e\u003ch3\u003eIs it the same as an OBD-II VCM device or a tune?\u003c\/h3\u003e\u003cp\u003eNo. OBD-II devices and software tunes work through the engine computer. This harness only changes the ECT1 sensor signal and leaves the software untouched.\u003c\/p\u003e\u003ch3\u003eDoes it work on four-cylinder, hybrid or turbo models?\u003c\/h3\u003e\u003cp\u003eNo. Those engines do not use VCM. The harness is for the 3.5L V6 VCM engines described on this page.\u003c\/p\u003e\u003ch3\u003eWhich resistance setting should I use?\u003c\/h3\u003e\u003cp\u003eStart with the setting the instructions list for your model. If a check-engine light appears, unplug the harness, read the code and contact support with the VIN and the code.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493788758388,"sku":"RC-VCM-01-06","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-VCM-01-06-1.jpg?v=1793172688"},{"product_id":"afm-dfm-vcm-disabler-acura-tlx-2015-2020-vcm-disabler","title":"Acura TLX 2015-2020 3.5L V6 VCM Disabler Harness","description":"\u003cp\u003eVCM disabler harness for the 2015–2020 Acura TLX. It connects inline at the engine coolant temperature (ECT1) sensor and adds a small, selectable resistance to that signal, which keeps Honda's Variable Cylinder Management from shutting down cylinders. The engine runs on all six all the time.\u003c\/p\u003e\u003cp\u003eIt is fully reversible and leaves the engine computer untouched.\u003c\/p\u003e\u003ch2\u003eVehicles and years\u003c\/h2\u003e\u003cp\u003eListed applications (100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAcura TLX: 2015–2020\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eV6 versions of the 2015–2020 TLX use the J35Y6 3.5L with VCM-3 (3 or 6 cylinders). Four-cylinder TLX models have no VCM and are not covered.\u003c\/p\u003e\u003cp\u003eIf your vehicle's engine or trim is not one of the VCM versions described here, send the VIN to support before ordering.\u003c\/p\u003e\u003ch2\u003eHow Honda VCM works\u003c\/h2\u003e\u003cp\u003eAt light load, Honda's VCM idles one bank of cylinders. A synchronizing piston inside the rocker assembly disconnects the rocker arms for those cylinders from the cam, so their valves stay shut, and their injectors stop. Depending on generation, the engine runs on 3, 4 or 6 cylinders. The engine computer only allows this when its temperature and load conditions are met.\u003c\/p\u003e\u003ch2\u003eWhat the resistance settings do\u003c\/h2\u003e\u003cp\u003eBecause VCM is held off until the engine is warm, the coolant temperature input is the cleanest point to control it without touching software. The harness places a selectable resistor in the ECT1 signal circuit. Higher values shift the reading further. Pick the setting listed for your model in the instructions rather than going straight to the highest value.\u003c\/p\u003e\u003ch2\u003eFitting it\u003c\/h2\u003e\u003cp\u003eThe harness has a sensor-side plug and a vehicle-side plug. Fit it with the engine off and cool, confirm both locks click, select the resistance value from the instructions, and route the lead away from heat and moving parts. Removal is the reverse.\u003c\/p\u003e\u003ch2\u003eWhat to expect\u003c\/h2\u003e\u003cp\u003eThe change is most noticeable at steady cruising speed on a warm engine, where VCM previously cut in. With the harness installed, that mode change should no longer happen. Acceleration and full-throttle behavior are the same as before. If a check-engine light appears, recheck the connections and the resistance setting against the instructions, then contact support with the code.\u003c\/p\u003e\u003ch2\u003eThree versions of VCM\u003c\/h2\u003e\u003cp\u003eThere are three main VCM versions: VCM-1 (3 or 6 cylinders), VCM-2 (3, 4 or 6 cylinders) and VCM-3 (3 or 6 cylinders, on the later direct-injection J35Y engines). The version depends on model year, and the notes above show which applies to each covered generation. Since all of them rely on the engine computer's temperature checks, the ECT1 approach applies across the range.\u003c\/p\u003e\u003ch2\u003eWhat owners notice\u003c\/h2\u003e\u003cp\u003eThe complaints that bring most owners here are vibration or a hum through the cabin when VCM is active, a slight jerk at low speed when cylinders come back online, and concern about oil and spark-plug fouling on the deactivated bank. Keeping all six cylinders running removes the mode changes. Light-load fuel economy will usually drop somewhat, because that is where VCM saves fuel.\u003c\/p\u003e\u003ch2\u003eBefore you install\u003c\/h2\u003e\u003cp\u003eStart with a healthy engine: no check-engine light, coolant at the correct level, a thermostat that opens normally and no misfire history. The harness relies on a working ECT1 sensor; if that sensor is faulty, replace it before installing the harness.\u003c\/p\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model and year match a row above (2015–2020 Acura TLX).\u003c\/li\u003e\n\u003cli\u003eYour vehicle has the V6 with VCM described in the notes above (not a four-cylinder, hybrid or turbo model).\u003c\/li\u003e\n\u003cli\u003eThe connector at your ECT1 sensor matches the product photos.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, aftermarket ECUs or modified wiring need a fitment check from support first.\u003c\/li\u003e\n\u003cli\u003eUnsure? Send your VIN to support@automotivebypass.com.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year\u003c\/h2\u003e\u003cp\u003eOne row per model year from the fitment data. Check the generation notes above for years without VCM:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eTLX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eTLX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eTLX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eTLX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eTLX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eTLX\u003c\/td\u003e\n\u003ctd\u003e3.5L V6\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eVCM:\u003c\/strong\u003e Variable Cylinder Management, Honda's cylinder deactivation system on 3.5L V6 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eECT1:\u003c\/strong\u003e Engine coolant temperature sensor 1, the input this harness works on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eACM:\u003c\/strong\u003e Active Control Engine Mount, used by Honda to counter vibration in reduced-cylinder mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJ35:\u003c\/strong\u003e Honda's 3.5L V6 engine family; suffixes such as Z4 or Y6 identify the version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThermistor:\u003c\/strong\u003e A sensor whose resistance changes with temperature; coolant sensors drop in resistance as the engine warms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVTEC:\u003c\/strong\u003e Honda's variable valve system; VCM uses its rocker-arm mechanism to keep valves closed.\u003c\/p\u003e\u003ch2\u003eIf something seems wrong\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light:\u003c\/strong\u003e Unplug the harness, reconnect the factory plug, read the code and contact support with the code, the VIN and the setting used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVCM still engages:\u003c\/strong\u003e Confirm both connectors are latched and the harness is on the ECT1 sensor named in the instructions, then check the setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTemperature gauge reads differently:\u003c\/strong\u003e Stop and check the instructions for your model; contact support before driving further.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVibration remains:\u003c\/strong\u003e If the engine stays on six cylinders and vibration continues, inspect engine mounts and other causes.\u003c\/p\u003e\u003ch2\u003eHow Honda handled VCM vibration\u003c\/h2\u003e\u003cp\u003eRunning a V6 on three cylinders changes its vibration and sound. Honda addressed that from the first VCM application (2005 Odyssey) with Active Control Engine Mounts, which respond to engine vibration, and Active Noise Control, which uses the audio speakers to cancel low-frequency noise. Worn mounts are a common reason owners notice VCM more on older vehicles.\u003c\/p\u003e\u003ch2\u003eBefore you install\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLet the engine cool completely; the ECT1 sensor sits in the cooling system.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off.\u003c\/li\u003e\n\u003cli\u003eLocate the ECT1 sensor using the instructions for your model.\u003c\/li\u003e\n\u003cli\u003eCompare its connector with the harness plugs.\u003c\/li\u003e\n\u003cli\u003eSet the resistance selector to the value listed for your model.\u003c\/li\u003e\n\u003cli\u003eFit the harness, check that both locks click and tie the lead clear of hot or moving parts.\u003c\/li\u003e\n\u003cli\u003eStart the engine, check for warning lights, then drive until fully warm and cruise lightly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eDoes this VCM harness plug into the OBD-II port on the Acura TLX?\u003c\/h3\u003e\u003cp\u003eNo. It connects inline at the ECT1 coolant temperature sensor connector.\u003c\/p\u003e\u003ch3\u003eWhat do the 68Ω, 82Ω, 100Ω and 120Ω settings mean?\u003c\/h3\u003e\u003cp\u003eThey are resistance values added to the ECT1 signal, not power levels. Use the setting the instructions give for your vehicle.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all six cylinders active. Power at full throttle is unchanged because VCM is not active at full throttle.\u003c\/p\u003e\u003ch3\u003eWhich Acura TLX years are listed?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Acura TLX 2015–2020. VCM fitment also depends on engine and trim, so check the notes on this page.\u003c\/p\u003e\u003ch3\u003eDoes fuel economy change?\u003c\/h3\u003e\u003cp\u003eUsually a little at light-load cruising, because that is where VCM saved fuel. Acceleration and full-throttle driving always ran on six cylinders.\u003c\/p\u003e\u003ch3\u003eCan I return to factory VCM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the harness and reconnect the factory connector to the sensor.\u003c\/p\u003e\u003ch3\u003eWill it fix oil consumption or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Diagnose and repair existing faults first. The harness only prevents VCM from engaging.\u003c\/p\u003e\u003ch3\u003eDoes it work on four-cylinder, hybrid or turbo models?\u003c\/h3\u003e\u003cp\u003eNo. Those engines do not use VCM. The harness is for the 3.5L V6 VCM engines described on this page.\u003c\/p\u003e\u003ch3\u003eWhich resistance setting should I use?\u003c\/h3\u003e\u003cp\u003eStart with the setting the instructions list for your model. If a check-engine light appears, unplug the harness, read the code and contact support with the VIN and the code.\u003c\/p\u003e\u003ch3\u003eIs it the same as an OBD-II VCM device or a tune?\u003c\/h3\u003e\u003cp\u003eNo. OBD-II devices and software tunes work through the engine computer. This harness only changes the ECT1 sensor signal and leaves the software untouched.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493788791156,"sku":"RC-VCM-01-07","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-VCM-01-07-1.jpg?v=1793172694"}],"url":"https:\/\/automotivebypass.com\/collections\/afm-dfm-vcm-disablers.oembed?page=2","provider":"Automotivebypass","version":"1.0","type":"link"}