{"product_id":"afm-dfm-vcm-disabler-buick-terraza-regal-gs-2006-2018-afm-dfm-disabler","title":"Buick Terraza 2006-2008 3.9L V6 \u0026 Regal GS 2018 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2006–2008 Buick Terraza and 2018 Buick Regal GS. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2006–2008 Buick Terraza: 3.9L V6\u003c\/li\u003e\n\u003cli\u003e2018 Buick Regal GS: 3.6L V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eGM's cylinder deactivation saves fuel by running the engine on fewer cylinders during light-load cruising. The switch is controlled by the engine computer. The module talks to the vehicle through the OBD-II port and keeps that reduced-cylinder mode from being selected, so all cylinders stay active.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eMany drivers would rather have predictable response than the small economy gain from running on fewer cylinders, especially when towing, hauling or driving in hills. Keeping AFM off removes the mode changes entirely. It does not add horsepower, and it is not a fix for an engine that already has lifter or oil-consumption problems.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2006–2008 Buick Terraza and 2018 Buick Regal GS).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal GS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eTerraza\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eTerraza\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eTerraza\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eGM 3.6L V6 engines and AFM\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eWhich Buick Terraza and Buick Regal GS years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Buick Terraza 2006–2008; Buick Regal GS 2018 with 3.6L V6, 3.9L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Buick Terraza and Buick Regal GS has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Buick Terraza and Buick Regal GS?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493787939188,"sku":"RC-AFM-DFM-01-44","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-44-1.jpg?v=1793172602","url":"https:\/\/automotivebypass.com\/products\/afm-dfm-vcm-disabler-buick-terraza-regal-gs-2006-2018-afm-dfm-disabler","provider":"Automotivebypass","version":"1.0","type":"link"}