{"product_id":"afm-dfm-vcm-disabler-cadillac-cts-2004-2018-afm-dfm-disabler","title":"Cadillac CTS 2004-2018 3.6L\/6.0L\/6.2L V6\/V8 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2004–2018 Cadillac CTS: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eFitment by year and engine\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2004–2018 Cadillac CTS: 3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003eThe first drive\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eEngine care\u003c\/h2\u003e\u003cp\u003eOil level and quality are worth watching on any AFM engine, because the deactivation hardware is hydraulic. Check the dipstick at fuel stops on high-mileage engines, follow GM's specified oil grade, and address oil-pressure warnings immediately. None of that changes with the module installed.\u003c\/p\u003e\u003ch2\u003eIf the engine already has symptoms\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2004–2018 Cadillac CTS).\u003c\/li\u003e\n\u003cli\u003eLook up the engine RPO code. Older GM vehicles print it on the Service Parts Identification sticker, often in the glovebox; 2018 and newer GM models carry it in a QR code on the driver-side B-pillar label. You can also read the 8th digit of the VIN, which is the engine code.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 \/ 6.0L V8 \/ 6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eThe hardware behind AFM\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac CTS?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Cadillac CTS years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac CTS 2004–2018 with 3.6L V6, 6.0L V8, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac CTS has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785186676,"sku":"RC-AFM-DFM-01-27","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-27-1.jpg?v=1793172448","url":"https:\/\/automotivebypass.com\/products\/afm-dfm-vcm-disabler-cadillac-cts-2004-2018-afm-dfm-disabler","provider":"Automotivebypass","version":"1.0","type":"link"}