{"product_id":"afm-dfm-vcm-disabler-cadillac-escalade-ext-2010-2013-afm-dfm-disabler","title":"Cadillac Escalade EXT 2010-2013 6.2L V8 AFM\/DFM Disabler","description":"\u003cp\u003eThis AFM\/DFM disabler plugs into the OBD-II port of the 2010–2013 Cadillac Escalade EXT. Its job is to keep the engine running on all cylinders instead of dropping into the reduced-cylinder mode that GM's Active Fuel Management uses at light load. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eThe fitment table for this part (all rows marked 100% fitment match):\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2010–2013 Cadillac Escalade EXT: 6.2L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eL94 (6.2L, 2010–2014, VIN 8th digit \"F\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIn the same trucks and SUVs, GM also built V8s without AFM, for example the 5.3L LH9 (2010–2012 trucks, VIN code P), the 6.0L LY6 and L96 and the 6.2L L9H. Those engines never deactivate cylinders, so the module has nothing to manage on them. Check your code against both lists before you buy.\u003c\/p\u003e\u003cp\u003eAn engine code that is not listed here does not automatically rule the vehicle out, but send us the VIN first so we can check.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eScan tools and inspections\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eOwners usually disable AFM for one of three reasons: they notice the change between modes as a vibration or exhaust drone, they want a consistent throttle response while towing or climbing grades, or they want to limit how often the deactivation lifters switch. Keeping the engine on all cylinders addresses all three. The tradeoff is that you give up whatever fuel saving AFM was providing in light cruising.\u003c\/p\u003e\u003ch2\u003eWhat changes when you drive\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2010–2013 Cadillac Escalade EXT).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade EXT\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade EXT\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade EXT\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade EXT\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL94\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e403 hp\u003c\/td\u003e\n\u003ctd\u003e417 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.40:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, E85-capable\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eGeneration notes\u003c\/h2\u003e\u003cp\u003eGM's full-size trucks and SUVs from the 2007 model year rode on the GMT900 platform with Gen IV V8s. The 2014 Silverado 1500 and Sierra 1500, and the 2015 Tahoe, Suburban, Yukon and Escalade, moved to the K2XX platform with the EcoTec3 engines (4.3L LV3, 5.3L L83, 6.2L L86). Both generations used AFM on most gasoline V8s, so the engine code decides fitment more reliably than the model name.\u003c\/p\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eL94\u003c\/strong\u003e: 6.2L V8 with variable valve timing and flex-fuel capability, used in Escalade and Yukon Denali models. VIN engine digit \"F\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003e6.2L engine history\u003c\/h2\u003e\u003cp\u003eGM's 6.2L truck V8 changed three times in the GMT900 years. The L92 debuted in the 2007 Cadillac Escalade; engines built before April 1, 2006 carried AFM hardware that was never switched on, and later ones had none. For 2009 the engine became flex-fuel as the L9H, still without AFM. For 2010 GM added Active Fuel Management, creating the L94 used in the Escalade and Yukon Denali models. The 2007–2013 Sierra 1500 Denali is listed with the L92\/L9H family rather than the L94. From 2014 on, the trucks use the EcoTec3 6.2L L86, which has AFM.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac Escalade EXT?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eWhich Cadillac Escalade EXT years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac Escalade EXT 2010–2013 with 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac Escalade EXT has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785383284,"sku":"RC-AFM-DFM-01-30","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-30-1.jpg?v=1793172477","url":"https:\/\/automotivebypass.com\/products\/afm-dfm-vcm-disabler-cadillac-escalade-ext-2010-2013-afm-dfm-disabler","provider":"Automotivebypass","version":"1.0","type":"link"}