{"product_id":"afm-dfm-vcm-disabler-chevrolet-corvette-2012-2019-traverse-2018-afm-dfm-disabler","title":"Chevrolet Corvette 2012-2019 6.2L V8 \/ Traverse 2018 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2012–2019 Chevrolet Corvette and 2018 Chevrolet Traverse. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2012–2019 Chevrolet Corvette: 6.2L V8\u003c\/li\u003e\n\u003cli\u003e2018 Chevrolet Traverse: 3.6L V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLT1 (6.2L, 2014–2019, VIN 8th digit \"7\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eThe factory system in brief\u003c\/h2\u003e\u003cp\u003eGM's Active Fuel Management turns a V8 into a V4 at light load by deactivating cylinders 1, 7, 6 and 4. Solenoids route oil pressure to the lifters on those cylinders, which collapse and stop opening the valves. Fuel to those cylinders is cut at the same time. Press the throttle harder and the system brings all eight back.\u003c\/p\u003e\u003ch2\u003ePlug-in module vs. a mechanical AFM delete\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eMaintenance still matters\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eConfirm your engine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2012–2019 Chevrolet Corvette and 2018 Chevrolet Traverse).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e6.2L V8\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTraverse\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eGM built several 3.6L V6 versions, and only some have AFM. The LGX (2016-on Camaro) and the LGZ (2017-on Colorado and Canyon) both use direct injection, variable valve timing and Active Fuel Management, running on four cylinders at light load (cylinders 2 and 5 are shut down on the LGX). The LFX, used in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave do not have AFM. Your RPO code settles it.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngine data at a glance\u003c\/h2\u003e\u003cp\u003ePublished output and key features of the relevant engines. Exact ratings depend on the vehicle and model year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003e6.2L\u003c\/td\u003e\n\u003ctd\u003e455–460 hp\u003c\/td\u003e\n\u003ctd\u003e455–465 lb-ft\u003c\/td\u003e\n\u003ctd\u003e11.50:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, VVT, direct injection\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM first sold cylinder deactivation in 1981 with the Cadillac V8-6-4. The modern system was announced in 2003 as Displacement on Demand and reached production on the 2005 Chevrolet TrailBlazer EXT and GMC Envoy XL and XUV with the 5.3L V8, followed by the 5.3L LS4 in the Impala SS, Monte Carlo SS and Pontiac Grand Prix GXP. Renamed Active Fuel Management, it spread across GM's Gen IV and EcoTec3 truck engines. For the 2019 Silverado, GM introduced Dynamic Fuel Management, based on Tula Technology's Dynamic Skip Fire, which can deactivate cylinders individually.\u003c\/p\u003e\u003ch2\u003eModel background\u003c\/h2\u003e\u003cp\u003eThe C7 Corvette (2014–2019) uses the 6.2L LT1 with Active Fuel Management. The C6 Corvette through 2013 used the LS3 and LS7, which GM's engine tables list without AFM, so earlier cars have no cylinder deactivation for the module to manage.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eThe engines behind the codes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLT1\u003c\/strong\u003e: 6.2L Gen V V8 with direct injection and variable valve timing. VIN engine digit \"7\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Corvette and Chevrolet Traverse?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Corvette and Chevrolet Traverse years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Corvette 2012–2019; Chevrolet Traverse 2018 with 3.6L V6, 6.2L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Corvette and Chevrolet Traverse has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493782827380,"sku":"RC-AFM-DFM-01-10","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-10-1.jpg?v=1793172226","url":"https:\/\/automotivebypass.com\/products\/afm-dfm-vcm-disabler-chevrolet-corvette-2012-2019-traverse-2018-afm-dfm-disabler","provider":"Automotivebypass","version":"1.0","type":"link"}