{"product_id":"afm-dfm-vcm-disabler-chevrolet-equinox-sport-2008-2009-afm-dfm-disabler","title":"Chevrolet Equinox Sport 2008-2009 3.6L V6 AFM\/DFM Disable","description":"\u003cp\u003eFits the 2008–2009 Chevrolet Equinox Sport. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. It does not rewrite engine software, and removal takes seconds: unplug the module and the vehicle is back to stock behavior.\u003c\/p\u003e\u003ch2\u003eWhat it fits\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2008–2009 Chevrolet Equinox Sport: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eWhat AFM does on these engines\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eThe module uses the OBD-II port, so it has to come out whenever a technician or an inspection station needs the port. Plugging it back in restores the all-cylinder mode. Route it so the driver cannot kick it loose.\u003c\/p\u003e\u003ch2\u003eBefore installing\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eWhat owners are after\u003c\/h2\u003e\u003cp\u003eA Chevrolet Equinox Sport with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2008–2009 Chevrolet Equinox Sport).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year and engine\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eEquinox Sport\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eEquinox Sport\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eFrom Displacement on Demand to DFM\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eAn AFM engine has a solenoid valve assembly in the engine valley cover. Its solenoids send pressurized oil to special hydraulic roller lifters (supplied by Eaton and Delphi) on the deactivating cylinders, which then stop opening the valves. Because the system runs on oil pressure, oil quality matters: worn-out anti-foam additives, the wrong viscosity or overdue changes can delay the oil signal and upset the switching. The module stops the switching; the oil system still needs proper care.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe V6 question\u003c\/h2\u003e\u003cp\u003eNot every GM 3.6L V6 deactivates cylinders. The LGX, which arrived in the 2016 Camaro, has Active Fuel Management and shuts down cylinders 2 and 5 at light load. The LGZ in the 2017-on Colorado and Canyon also has AFM and is paired with the 8-speed automatic. The earlier LFX (used, for example, in the 2015–2016 Colorado and Canyon) and the LFY in the 2018 Traverse and Enclave have no cylinder deactivation, so the module has nothing to control on them. Check the RPO code before ordering.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Equinox Sport?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Equinox Sport years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Equinox Sport 2008–2009 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Equinox Sport has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493781582196,"sku":"RC-AFM-DFM-01-02","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-02-1.jpg?v=1793172140","url":"https:\/\/automotivebypass.com\/products\/afm-dfm-vcm-disabler-chevrolet-equinox-sport-2008-2009-afm-dfm-disabler","provider":"Automotivebypass","version":"1.0","type":"link"}