{"product_id":"afm-dfm-vcm-disabler-chevrolet-monte-carlo-2006-2007-afm-dfm-disabler","title":"Chevrolet Monte Carlo 2006-2007 5.3L V8 AFM\/DFM Disabler","description":"\u003cp\u003eFor the 2006–2008 Chevrolet Monte Carlo: an OBD-II plug-in module that stops the engine from switching into cylinder-deactivation mode. The engine stays on all cylinders during cruising and light throttle, where AFM would normally shut half of them down. There is no tune involved and nothing inside the engine is changed. Pull it out of the port and the factory strategy returns.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2006–2008 Chevrolet Monte Carlo: 5.3L V8\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAFM-equipped engine codes that GM used in these years and sizes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLS4 (5.3L, 2005–2009, VIN 8th digit \"C\")\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIf your engine code is not in this list, email the VIN to support before ordering so we can confirm the application.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eWhen cruising at steady speed, an AFM V8 drops to four cylinders. Cylinders 1, 7, 6 and 4 have two-stage lifters that the engine computer can switch with oil pressure; once switched, those valves stay shut and the injectors stop firing. The switch back to eight cylinders happens whenever more torque is needed.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003ePractical notes\u003c\/h2\u003e\u003cp\u003eBecause it occupies the OBD-II port, unplug the module before connecting a scan tool, an insurance logger or an emissions-test probe, then plug it back in afterwards. Make sure it sits clear of your left knee and the pedals, and that the housing is fully seated in the port.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eThe difference shows up in light-load driving: steady highway speeds, gentle acceleration and coasting down small grades. Those are the moments when AFM used to drop cylinders. With the module in, engine behavior there should feel the same as under heavier throttle. Full-throttle performance does not change, because AFM was never active at full throttle anyway.\u003c\/p\u003e\u003ch2\u003eIf the engine already has symptoms\u003c\/h2\u003e\u003cp\u003eKeep the oil at the correct level and grade before and after installation. AFM lifters and their solenoids are oil-pressure operated, so an engine that is low on oil or running the wrong grade should be sorted out first. The module stops the switching, but it is not a substitute for maintenance or for repairing an engine that already has a fault.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eThe usual complaints are a drone or shudder in reduced-cylinder mode, a slight hesitation when the engine switches back, and a general wish to keep the valvetrain doing the same thing all the time. With the module installed, the engine stays in full-cylinder mode, so those transitions stop. Expect light-load fuel economy to be closer to an engine without AFM.\u003c\/p\u003e\u003ch2\u003eHow this differs from an AFM delete kit\u003c\/h2\u003e\u003cp\u003eThere are three common ways to stop cylinder deactivation on GM engines: a plug-in module like this one, a custom tune that turns AFM off in the engine computer, or a mechanical delete that replaces the AFM lifters and related hardware and then needs a tune to match. The module is the only one of the three that needs no tools and no engine-computer changes, and it is the only one you can undo by unplugging it. It does not replace failed lifters; if hardware is already damaged, the repair comes first.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2006–2008 Chevrolet Monte Carlo).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table with engine codes\u003c\/h2\u003e\u003cp\u003eThe full fitment data, by year, alongside matching AFM engine codes:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003e5.3L V8\u003c\/td\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eEngine specifications\u003c\/h2\u003e\u003cp\u003eRatings and features for the engine codes that apply to this listing, as published for each engine (figures vary by vehicle and year):\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRPO code\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eCompression\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLS4\u003c\/td\u003e\n\u003ctd\u003e5.3L\u003c\/td\u003e\n\u003ctd\u003e300–303 hp\u003c\/td\u003e\n\u003ctd\u003e323 lb-ft\u003c\/td\u003e\n\u003ctd\u003e10.00:1\u003c\/td\u003e\n\u003ctd\u003ealuminum block, AFM, front-wheel drive\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngine code notes\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eLS4\u003c\/strong\u003e: 5.3L V8 mounted transversely in front-drive cars such as the Impala SS, Monte Carlo SS and Grand Prix GXP. VIN engine digit \"C\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eAFM uses oil pressure as its control signal. A solenoid valve assembly under the intake manifold, in the valley cover, routes oil to collapsible lifters on the deactivating cylinders. Aerated or wrong-viscosity oil slows that signal. Keeping AFM off removes the switching, but every lifter still relies on the oiling system, so stick to the specified oil and intervals.\u003c\/p\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhich Chevrolet Monte Carlo years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Monte Carlo 2006–2008 with 5.3L V8. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Monte Carlo?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Monte Carlo has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493781942644,"sku":"RC-AFM-DFM-01-07","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-07-1.jpg?v=1793172191","url":"https:\/\/automotivebypass.com\/products\/afm-dfm-vcm-disabler-chevrolet-monte-carlo-2006-2007-afm-dfm-disabler","provider":"Automotivebypass","version":"1.0","type":"link"}