{"product_id":"afm-dfm-vcm-disabler-chevrolet-uplander-2006-2008-afm-dfm-disabler","title":"Chevrolet Uplander 2006-2008 3.9L V6 AFM\/DFM Disabler","description":"\u003cp\u003eA plug-in cylinder-deactivation disabler for the 2006–2008 Chevrolet Uplander. It goes into the OBD-II diagnostic port and keeps the factory Active Fuel Management system from engaging, so the engine runs on every cylinder all the time. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eCovered applications\u003c\/h2\u003e\u003cp\u003eListed applications, each a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2006–2008 Chevrolet Uplander: 3.9L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eConfirm that your exact engine is the one in the table and that it uses cylinder deactivation. The RPO label and the VIN engine digit are the reliable ways to check, and support can confirm from a VIN.\u003c\/p\u003e\u003ch2\u003eHow Active Fuel Management operates\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eUsing it day to day\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eDiagnose existing problems first\u003c\/h2\u003e\u003cp\u003eThis module prevents mode switching. It does not repair anything. If the engine already has a ticking lifter, misfire codes, low oil pressure or high oil consumption, have it diagnosed before relying on the module. Those symptoms need a mechanical repair, and keeping AFM off will not reverse damage that has already happened.\u003c\/p\u003e\u003ch2\u003eOther ways owners disable AFM\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eKeep up with oil changes\u003c\/h2\u003e\u003cp\u003eDisabling cylinder deactivation does not replace normal maintenance. Use the oil grade and change interval GM lists for your engine, watch the oil level between changes, and repair leaks promptly. The valvetrain on these engines depends on clean oil at proper pressure in every mode.\u003c\/p\u003e\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eDrive at a steady cruise on a light throttle, where AFM used to switch modes. The engine should now stay on all cylinders, so the subtle shudder, drone or hesitation that came with each change should be gone. If your dash shows instant fuel economy, expect the light-cruise numbers to read a little lower than before, since that is exactly where cylinder deactivation saved fuel.\u003c\/p\u003e\u003ch2\u003eWhy people turn AFM off\u003c\/h2\u003e\u003cp\u003eA Chevrolet Uplander with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2006–2008 Chevrolet Uplander).\u003c\/li\u003e\n\u003cli\u003eThe quickest checks are the 8th digit of your VIN, which identifies the engine, and the RPO list on the Service Parts Identification label (glovebox or trunk on most pre-2018 GM models, QR code on the driver-door pillar label from 2018).\u003c\/li\u003e\n\u003cli\u003eNo check-engine light is on, and oil level and pressure are normal.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, custom tunes and replaced ECUs need a fitment check from support before ordering.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eEach model year from the fitment data, with the AFM engine codes GM used for that year and displacement:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eUplander\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eUplander\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eUplander\u003c\/td\u003e\n\u003ctd\u003e3.9L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eTroubleshooting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck-engine light after fitting:\u003c\/strong\u003e Unplug the module, read the code and contact support with the code and the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still feels like it is switching modes:\u003c\/strong\u003e Confirm the module is fully seated in the port and that the engine code is an AFM engine listed for this vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScan tool will not connect:\u003c\/strong\u003e The module occupies the port; remove it while the tool is in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTicking or misfire continues:\u003c\/strong\u003e That is a mechanical or ignition fault. The module prevents switching; it does not repair hardware.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear up any warning lights first: the module is for a healthy engine.\u003c\/li\u003e\n\u003cli\u003eConfirm oil level and grade.\u003c\/li\u003e\n\u003cli\u003eTurn everything off.\u003c\/li\u003e\n\u003cli\u003ePlug the module into the OBD-II port.\u003c\/li\u003e\n\u003cli\u003eCheck it is fully seated and cannot be kicked loose.\u003c\/li\u003e\n\u003cli\u003eStart the engine.\u003c\/li\u003e\n\u003cli\u003eCruise lightly on a level road to confirm all cylinders stay active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA short history of GM cylinder deactivation\u003c\/h2\u003e\u003cp\u003eGM's first attempt was the 1981 Cadillac V8-6-4. Displacement on Demand followed in the 2005 model year on the 5.3L TrailBlazer EXT and Envoy XL\/XUV and on LS4-powered front-drive cars, and was renamed Active Fuel Management as it moved into the full-size trucks and SUVs. Dynamic Fuel Management, developed from Tula Technology's Dynamic Skip Fire, took over on the 2019 Silverado 1500 and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003ch2\u003eWhat is inside an AFM engine\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich Chevrolet Uplander years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Chevrolet Uplander 2006–2008 with 3.9L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Chevrolet Uplander?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Chevrolet Uplander has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493783220596,"sku":"RC-AFM-DFM-01-15","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-15-1.jpg?v=1793172275","url":"https:\/\/automotivebypass.com\/products\/afm-dfm-vcm-disabler-chevrolet-uplander-2006-2008-afm-dfm-disabler","provider":"Automotivebypass","version":"1.0","type":"link"}