{"product_id":"auto-start-stop-eliminator-2016-2018-cadillac-ct6-auto-start-stop-eliminator","title":"2016-2018 Cadillac CT6 Auto Start Stop Eliminator","description":"\u003cp\u003eBuilt for the 2016–2018 Cadillac CT6, this inline memory harness keeps Auto Stop\/Start in whatever state you left it. Press the button once, and the setting carries over to the next start. It plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003cp\u003eNothing is reprogrammed in the engine computer. The module only stands in for the button press you would otherwise make after every start, and it comes out without leaving a trace.\u003c\/p\u003e\u003ch2\u003eCovered model years\u003c\/h2\u003e\u003cp\u003eListed applications (each row is a 100% fitment match for the factory connector this part uses):\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCadillac CT6: 2016–2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFor reference, the Cadillac CT6 in these years is a full-size luxury sedan offered with 2.0L turbo four-cylinder, 3.6L V6 and 3.0L twin-turbo V6 engines, most of the driving it sees is daily commuting, ride-share duty and highway travel. Trim is not listed separately. Any trim in these years with factory stop-start and the pictured connector is covered.\u003c\/p\u003e\u003ch2\u003eWhat the factory system does\u003c\/h2\u003e\u003cp\u003eAuto Stop\/Start is designed to default to on. The off switch (usually marked with an \"A\" inside a circular arrow) cancels it for the current drive. At the next start the system is armed again. That reset is intentional on the manufacturer's side, and it is the only behavior this module changes.\u003c\/p\u003e\u003ch2\u003eWhat changes after installation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIt does not change engine power, transmission shifts, emissions calibration or fuel trims.\u003c\/li\u003e\n\u003cli\u003eIt remembers the last stop-start setting through a key cycle.\u003c\/li\u003e\n\u003cli\u003eIt does not write anything to the vehicle's modules, and removing it restores the stock default.\u003c\/li\u003e\n\u003cli\u003eIt leaves the factory button working, so you can turn stop-start back on whenever you want.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere owners notice the difference\u003c\/h2\u003e\u003cp\u003eStop-start saves the most fuel in long idles, but plenty of drivers would rather keep the engine running. Common reasons: towing or hauling, where an engine restart under load is unwelcome; drive-thru lines and parking lots, where the engine cycles on and off every few feet; hot days, when the A\/C compressor stops with the engine on many vehicles; and stop-and-go traffic where the restart delay is noticeable when pulling into a gap. On a full-size luxury sedan, any of these can mean a button press at the start of nearly every drive.\u003c\/p\u003e\u003ch2\u003eDiagnostics first\u003c\/h2\u003e\u003cp\u003eIf the setting is not remembered, check that the module was installed with the ignition off and that the connector clicked into place. Then press the factory button once, switch the vehicle off, close the doors, give the electronics time to shut down, and start again. If it still resets, contact support with the year, trim and a photo of the connector.\u003c\/p\u003e\u003ch2\u003eKeep the battery healthy\u003c\/h2\u003e\u003cp\u003eIf the stop-start indicator shows the system as unavailable, test the battery before anything else. On stop-start vehicles that is the most common cause. A replacement should match the original specification (AGM or EFB), and some manufacturers call for a battery monitor reset after the swap.\u003c\/p\u003e\u003ch2\u003eInstallation and removal\u003c\/h2\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced. Work with the ignition off. Seat each connector until its lock engages, then secure the module with the supplied ties or tape so it cannot rattle or touch pedals, steering parts or anything hot. Start the vehicle, press the stop-start button once, then restart to confirm the choice is held.\u003c\/p\u003e\u003ch2\u003eThings that already block an auto stop\u003c\/h2\u003e\u003cp\u003eEven with Auto Stop\/Start enabled, the engine control logic only stops the engine when conditions allow it. Typical blockers are a low battery state of charge, an engine that has not reached operating temperature, heavy heating or A\/C demand, steering input, an open door or unlatched seatbelt, and some drive modes. If the system never seems to stop the engine, one of these is usually the reason, and the module does not change that logic.\u003c\/p\u003e\u003ch2\u003eConfirm these points\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel year and model match a row in the table above (2016–2018 Cadillac CT6).\u003c\/li\u003e\n\u003cli\u003eYour Cadillac CT6 has the factory stop-start button. Base trims or engines without stop-start have nothing for the module to remember.\u003c\/li\u003e\n\u003cli\u003eThe battery and charging system test good and no warning lights are on.\u003c\/li\u003e\n\u003cli\u003eNo aftermarket remote start, alarm or gateway bypass is wired into the same circuit. If one is, email support before ordering.\u003c\/li\u003e\n\u003cli\u003eThe connector at your install point matches the one in the product photos.\u003c\/li\u003e\n\u003cli\u003eIf you are unsure, send your VIN to support@automotivebypass.com and we will confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per model year, taken from the fitment data for this SKU:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine \/ trim\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCT6\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCT6\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eCT6\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAGM \/ EFB battery:\u003c\/strong\u003e Battery types designed for the frequent cycling of stop-start vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNon-latching:\u003c\/strong\u003e A setting that does not stay where the driver left it after a restart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto Stop\/Start:\u003c\/strong\u003e Cadillac's name for the automatic engine stop-start feature on the Cadillac CT6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey cycle:\u003c\/strong\u003e One switch-off and restart of the vehicle. Factory stop-start resets at each key cycle.\u003c\/p\u003e\u003ch2\u003eWhat sits behind the system\u003c\/h2\u003e\u003cp\u003eStop-start puts extra load on the battery and starter, so manufacturers fit an AGM or enhanced flooded (EFB) battery and a starter rated for more cycles. Battery state is one of the inputs that decides whether the engine may stop. With the module installed the same rules apply, and the same battery type should be used when it is replaced.\u003c\/p\u003e\u003ch2\u003eThe reason the button has to be pressed every trip\u003c\/h2\u003e\u003cp\u003eThe factory behavior is tied to how fuel economy is rated in the US. A stop-start system that comes back on at each restart is rated with stop-start active. A system the driver can leave off would be tested both ways and averaged, which lowers the label figure. That is why Auto Stop\/Start on the Cadillac CT6 resets to on, and why a memory module is the way to keep your own preference.\u003c\/p\u003e\u003ch2\u003eIf something is not right\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSetting not remembered:\u003c\/strong\u003e Check that both connectors are fully latched, then set Auto Stop\/Start the way you want it, switch the vehicle fully off and restart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStop-start indicator flashes or shows unavailable:\u003c\/strong\u003e The vehicle is reporting a condition such as low battery charge, high climate demand or a cold engine. That comes from the factory logic, not the module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning message after fitting:\u003c\/strong\u003e Unplug the module, reconnect the factory connector and see whether the message clears. Contact support with the VIN and a photo of the connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine still stops at lights:\u003c\/strong\u003e That means Auto Stop\/Start was left on before shutdown. Press the button once to switch it off; the module remembers that choice from the next start.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSwitch everything off and take the key or fob out of range.\u003c\/li\u003e\n\u003cli\u003eGo through the model-specific instructions first.\u003c\/li\u003e\n\u003cli\u003eMatch the vehicle connector to the module before unplugging anything.\u003c\/li\u003e\n\u003cli\u003eRelease clips with a trim tool instead of pulling on wires.\u003c\/li\u003e\n\u003cli\u003eListen for the click on each latch.\u003c\/li\u003e\n\u003cli\u003eTie the module down so it stays quiet and away from moving parts.\u003c\/li\u003e\n\u003cli\u003eRun a restart test to confirm the memory works before refitting trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWhich Cadillac CT6 years does this fit?\u003c\/h3\u003e\u003cp\u003eThe listed range is 2016–2018. Check the fitment table on this page against your exact model year.\u003c\/p\u003e\u003ch3\u003eHow does it connect?\u003c\/h3\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003ch3\u003eDoes it change engine power or fuel trims?\u003c\/h3\u003e\u003cp\u003eNo. It does not reprogram the engine or transmission computers. It only stores the stop-start button state.\u003c\/p\u003e\u003ch3\u003eWill Auto Stop\/Start come back on when I restart my Cadillac CT6?\u003c\/h3\u003e\u003cp\u003eNot if you turned it off before shutting down. The module repeats your last selection at the next start. If you leave it on, it stays on.\u003c\/p\u003e\u003ch3\u003eCan I remove it later?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and reconnect the factory connector; the vehicle returns to its stock default.\u003c\/p\u003e\u003ch3\u003eWhy does my Cadillac CT6 sometimes not auto-stop even when the system is on?\u003c\/h3\u003e\u003cp\u003eThe factory logic checks battery charge, engine temperature, climate load and other inputs. If any are outside range it keeps the engine running. The module does not affect those checks.\u003c\/p\u003e\u003ch3\u003eDoes it change how the battery is charged?\u003c\/h3\u003e\u003cp\u003eNo. Charging is still managed by the vehicle. Stop-start vehicles normally use an AGM or EFB battery built for frequent restarts; replace it with the same type when it wears out.\u003c\/p\u003e\u003ch3\u003eWill it fix a \"stop-start unavailable\" message?\u003c\/h3\u003e\u003cp\u003eNo. That message usually points to the battery or a sensor. Diagnose and repair that first.\u003c\/p\u003e\u003ch3\u003eWhy does Auto Stop\/Start turn itself back on every time?\u003c\/h3\u003e\u003cp\u003eAutomakers set stop-start to default to on at each start. Under EPA test rules, a system that stays off after shutdown is tested both on and off and the results are averaged, which lowers the rated fuel economy, so most systems reset at every key cycle. The module carries your last choice across that reset.\u003c\/p\u003e\u003ch3\u003eWhat happens if I unplug it?\u003c\/h3\u003e\u003cp\u003eThe vehicle returns to the factory default, with Auto Stop\/Start switched on at every start.\u003c\/p\u003e\u003ch3\u003eDoes my Cadillac CT6 need the factory stop-start button for this to work?\u003c\/h3\u003e\u003cp\u003eYes. The module works with the factory stop-start system and its button. A vehicle built without stop-start has no setting for it to remember.\u003c\/p\u003e\u003ch3\u003eIs this the same part for every Cadillac?\u003c\/h3\u003e\u003cp\u003eNo. Connectors and the module that holds the stop-start state differ by platform, so this SKU is matched to the fitment rows on this page. Send the VIN to support if you are unsure.\u003c\/p\u003e\u003ch3\u003eDoes the stop-start button still work after installation on the Cadillac CT6?\u003c\/h3\u003e\u003cp\u003eYes. The factory button works normally. The module simply stores whatever you chose last.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493791904116,"sku":"RC-ASSE-08-04","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/2016-2018_Cadillac_CT6_Auto_Start-Stop_Eliminators_1.jpg?v=1793347481","url":"https:\/\/automotivebypass.com\/products\/auto-start-stop-eliminator-2016-2018-cadillac-ct6-auto-start-stop-eliminator","provider":"Automotivebypass","version":"1.0","type":"link"}