{"product_id":"auto-start-stop-eliminator-2018-gmc-terrain-auto-start-stop-eliminator","title":"2018 GMC Terrain Auto Start Stop Eliminator","description":"\u003cp\u003eA inline memory harness for the 2018 GMC Terrain. Out of the factory, Auto Stop\/Start comes back on at every key cycle. This module remembers your last choice and sends it again at the next start. It plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003cp\u003eYou can still use the original button at any time. Whatever you select last is what the module repeats on the next start. Take the module out and the vehicle behaves exactly as it did from the factory.\u003c\/p\u003e\u003ch2\u003eCovered model years\u003c\/h2\u003e\u003cp\u003eThe fitment table for this SKU lists the following, each marked as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eGMC Terrain: 2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFor reference, the GMC Terrain in these years is a compact crossover offered with 1.5L turbo four-cylinder engines, with a 2.0L turbo four-cylinder offered on earlier model years, most of the driving it sees is commuting, errands and light cargo duty. The listing is written around the second-generation (2018-2024) Terrain. The table does not separate trims; what matters is that the vehicle has factory stop-start and the connector shown in the photos.\u003c\/p\u003e\u003ch2\u003eHow factory stop-start works on the GMC Terrain\u003c\/h2\u003e\u003cp\u003eOn the GMC Terrain, Auto Stop\/Start shuts the engine down at a stop and fires it back up as the brake is released. You can switch it off with the dash button, but the choice is not saved. The next ignition cycle brings the default back. The module keeps the choice you made instead.\u003c\/p\u003e\u003ch2\u003eWhat the module does and does not do\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFully reversible: unplug it and the vehicle returns to factory behavior.\u003c\/li\u003e\n\u003cli\u003eStores the stop-start choice you made last and repeats it at the next start.\u003c\/li\u003e\n\u003cli\u003eKeeps the original switch fully functional.\u003c\/li\u003e\n\u003cli\u003eNo tune, no reflash, no change to horsepower or shift points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhen the engine will not auto-stop anyway\u003c\/h2\u003e\u003cp\u003eAuto stop needs several conditions at once: a warm engine, enough battery charge, moderate cabin heating or cooling demand, and the vehicle fully stopped with the brake held. If any is missing, the engine keeps running. The module only remembers the button state; the factory controller still decides whether a stop is allowed.\u003c\/p\u003e\u003ch2\u003eWhere it connects\u003c\/h2\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced. The instructions show the connector for this application; compare it with the product photos before starting. Turn the vehicle off, make the connection, fix the module in place, and test with two or three key cycles.\u003c\/p\u003e\u003ch2\u003eBattery and charging\u003c\/h2\u003e\u003cp\u003eIf the stop-start indicator shows the system as unavailable, test the battery before anything else. On stop-start vehicles that is the most common cause. A replacement should match the original specification (AGM or EFB), and some manufacturers call for a battery monitor reset after the swap.\u003c\/p\u003e\u003ch2\u003eIf something does not look right\u003c\/h2\u003e\u003cp\u003eIf the setting is not remembered, check that the module was installed with the ignition off and that the connector clicked into place. Then press the factory button once, switch the vehicle off, close the doors, give the electronics time to shut down, and start again. If it still resets, contact support with the year, trim and a photo of the connector.\u003c\/p\u003e\u003ch2\u003eWhere owners notice the difference\u003c\/h2\u003e\u003cp\u003ePressing the same button on every drive is what wears on owners. People who tow, plow, idle in pickup lines, creep through heavy traffic or simply want the engine running at a light end up making the same press dozens of times a week. On the GMC Terrain, the module turns that into a one-time choice you can still change whenever you want.\u003c\/p\u003e\u003ch2\u003eCheck before you order\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel year and model match a row in the table above (2018 GMC Terrain).\u003c\/li\u003e\n\u003cli\u003eYour GMC Terrain has the factory stop-start button. Base trims or engines without stop-start have nothing for the module to remember.\u003c\/li\u003e\n\u003cli\u003eThe battery and charging system test good and no warning lights are on.\u003c\/li\u003e\n\u003cli\u003eThe connector at your install point matches the one in the product photos.\u003c\/li\u003e\n\u003cli\u003eNo aftermarket remote start, alarm or gateway bypass is wired into the same circuit. If one is, email support before ordering.\u003c\/li\u003e\n\u003cli\u003eIf you are unsure, send your VIN to support@automotivebypass.com and we will confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year\u003c\/h2\u003e\u003cp\u003eOne row per model year, taken from the fitment data for this SKU:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine \/ trim\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eTerrain\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparing for installation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSwitch everything off and take the key or fob out of range.\u003c\/li\u003e\n\u003cli\u003eGo through the model-specific instructions first.\u003c\/li\u003e\n\u003cli\u003eMatch the vehicle connector to the module before unplugging anything.\u003c\/li\u003e\n\u003cli\u003eRelease clips with a trim tool instead of pulling on wires.\u003c\/li\u003e\n\u003cli\u003eListen for the click on each latch.\u003c\/li\u003e\n\u003cli\u003eTie the module down so it stays quiet and away from moving parts.\u003c\/li\u003e\n\u003cli\u003eRun a restart test to confirm the memory works before refitting trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe reason the button has to be pressed every trip\u003c\/h2\u003e\u003cp\u003eThe factory behavior is tied to how fuel economy is rated in the US. A stop-start system that comes back on at each restart is rated with stop-start active. A system the driver can leave off would be tested both ways and averaged, which lowers the label figure. That is why Auto Stop\/Start on the GMC Terrain resets to on, and why a memory module is the way to keep your own preference.\u003c\/p\u003e\u003ch2\u003eHardware built for frequent restarts\u003c\/h2\u003e\u003cp\u003eTo cope with repeated restarts, stop-start vehicles normally carry an AGM or EFB battery and a heavier-duty starter, and the system watches battery charge closely. If the battery is weak, the vehicle will skip automatic stops on its own. The module leaves this hardware and its monitoring alone. Use the factory battery type when replacing it, and check the owner's manual for any battery reset step after replacement.\u003c\/p\u003e\u003ch2\u003eCommon questions after fitting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eChoice is forgotten after restart:\u003c\/strong\u003e A plug is usually not fully home. Push each until it latches and test again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIndicator says the system is unavailable:\u003c\/strong\u003e The vehicle has decided conditions are not right for an automatic stop. This is normal factory behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning appears:\u003c\/strong\u003e Remove the module, reconnect the original plug and confirm the warning clears, then contact support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine keeps shutting off at stops:\u003c\/strong\u003e Switch Auto Stop\/Start off once. The module stores the off state for the next start.\u003c\/p\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eKey cycle:\u003c\/strong\u003e One switch-off and restart of the vehicle. Factory stop-start resets at each key cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto Stop\/Start:\u003c\/strong\u003e GMC's name for the automatic engine stop-start feature on the GMC Terrain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAGM \/ EFB battery:\u003c\/strong\u003e Battery types designed for the frequent cycling of stop-start vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNon-latching:\u003c\/strong\u003e A setting that does not stay where the driver left it after a restart.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eCan I remove it later?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and reconnect the factory connector; the vehicle returns to its stock default.\u003c\/p\u003e\u003ch3\u003eWill it fix a \"stop-start unavailable\" message?\u003c\/h3\u003e\u003cp\u003eNo. That message usually points to the battery or a sensor. Diagnose and repair that first.\u003c\/p\u003e\u003ch3\u003eWhich GMC Terrain years does this fit?\u003c\/h3\u003e\u003cp\u003eThe listed range is 2018. Check the fitment table on this page against your exact model year.\u003c\/p\u003e\u003ch3\u003eWill Auto Stop\/Start come back on when I restart my GMC Terrain?\u003c\/h3\u003e\u003cp\u003eNot if you turned it off before shutting down. The module repeats your last selection at the next start. If you leave it on, it stays on.\u003c\/p\u003e\u003ch3\u003eWhy does my GMC Terrain sometimes not auto-stop even when the system is on?\u003c\/h3\u003e\u003cp\u003eThe factory logic checks battery charge, engine temperature, climate load and other inputs. If any are outside range it keeps the engine running. The module does not affect those checks.\u003c\/p\u003e\u003ch3\u003eHow does it connect?\u003c\/h3\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003ch3\u003eDoes it change engine power or fuel trims?\u003c\/h3\u003e\u003cp\u003eNo. It does not reprogram the engine or transmission computers. It only stores the stop-start button state.\u003c\/p\u003e\u003ch3\u003eDoes it change how the battery is charged?\u003c\/h3\u003e\u003cp\u003eNo. Charging is still managed by the vehicle. Stop-start vehicles normally use an AGM or EFB battery built for frequent restarts; replace it with the same type when it wears out.\u003c\/p\u003e\u003ch3\u003eWhat happens if I unplug it?\u003c\/h3\u003e\u003cp\u003eThe vehicle returns to the factory default, with Auto Stop\/Start switched on at every start.\u003c\/p\u003e\u003ch3\u003eDoes the stop-start button still work after installation on the GMC Terrain?\u003c\/h3\u003e\u003cp\u003eYes. The factory button works normally. The module simply stores whatever you chose last.\u003c\/p\u003e\u003ch3\u003eIs this the same part for every GMC?\u003c\/h3\u003e\u003cp\u003eNo. Connectors and the module that holds the stop-start state differ by platform, so this SKU is matched to the fitment rows on this page. Send the VIN to support if you are unsure.\u003c\/p\u003e\u003ch3\u003eWhy does Auto Stop\/Start turn itself back on every time?\u003c\/h3\u003e\u003cp\u003eAutomakers set stop-start to default to on at each start. Under EPA test rules, a system that stays off after shutdown is tested both on and off and the results are averaged, which lowers the rated fuel economy, so most systems reset at every key cycle. The module carries your last choice across that reset.\u003c\/p\u003e\u003ch3\u003eDoes my GMC Terrain need the factory stop-start button for this to work?\u003c\/h3\u003e\u003cp\u003eYes. The module works with the factory stop-start system and its button. A vehicle built without stop-start has no setting for it to remember.\u003c\/p\u003e\u003ch2\u003eWarranty and returns\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785678196,"sku":"RC-ASSE-02-01","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/2018_GMC_Terrain_Auto_Start-Stop_Eliminators_1.jpg?v=1793347188","url":"https:\/\/automotivebypass.com\/products\/auto-start-stop-eliminator-2018-gmc-terrain-auto-start-stop-eliminator","provider":"Automotivebypass","version":"1.0","type":"link"}