{"product_id":"auto-start-stop-eliminator-2019-2023-chevrolet-traverse-auto-start-stop-eliminator","title":"2019-2023 Chevrolet Traverse Auto Start Stop Eliminator","description":"\u003cp\u003eBuilt for the 2019–2023 Chevrolet Traverse, this inline memory harness keeps Auto Stop\/Start in whatever state you left it. Press the button once, and the setting carries over to the next start. It plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003cp\u003eThe factory button stays in place and still works. Press it and the module stores the new choice. Unplug the module and the vehicle goes back to stock behavior.\u003c\/p\u003e\u003ch2\u003eVehicles and years covered\u003c\/h2\u003e\u003cp\u003eThe fitment table for this SKU lists the following, each marked as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eChevrolet Traverse: 2019–2023\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe listing is written around the second-generation (2018-2024) Traverse. Trim is not listed separately. Any trim in these years with factory stop-start and the pictured connector is covered.\u003c\/p\u003e\u003ch2\u003eHow Auto Stop\/Start behaves from the factory\u003c\/h2\u003e\u003cp\u003eWith Auto Stop\/Start active, the engine shuts off when the vehicle comes to a stop and restarts when you lift off the brake or press the accelerator. The off button is a manual override for that drive only. Turn the ignition off and back on, and the system defaults to on again, so drivers who prefer it off end up pressing the button at the start of every trip.\u003c\/p\u003e\u003ch2\u003eWhat the module does and does not do\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIt does not write anything to the vehicle's modules, and removing it restores the stock default.\u003c\/li\u003e\n\u003cli\u003eIt remembers the last stop-start setting through a key cycle.\u003c\/li\u003e\n\u003cli\u003eIt does not change engine power, transmission shifts, emissions calibration or fuel trims.\u003c\/li\u003e\n\u003cli\u003eIt leaves the factory button working, so you can turn stop-start back on whenever you want.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstalling the inline memory harness\u003c\/h2\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced. Disconnect nothing else and splice nothing. Once both plugs are locked, tuck the harness where it will not be pinched when the panel goes back on. Test by switching Auto Stop\/Start off, cycling the ignition and checking the indicator.\u003c\/p\u003e\u003ch2\u003eTroubleshooting notes\u003c\/h2\u003e\u003cp\u003eA dead or weak battery, a charging problem or an unrelated module fault will change how Auto Stop\/Start behaves with or without this part installed. Scan the vehicle for stored codes, test the battery and confirm the system works normally with the factory button before installation. That baseline makes any later issue easy to pin down.\u003c\/p\u003e\u003ch2\u003eTypical reasons to keep it off\u003c\/h2\u003e\u003cp\u003eSome owners only want stop-start off in certain seasons or on certain trips, such as towing a trailer or crawling through summer traffic with the A\/C working hard. Because the module remembers whatever you chose last, it works both ways: leave the system off for a week, then switch it back on with the factory button and it stays on.\u003c\/p\u003e\u003ch2\u003eBattery and charging\u003c\/h2\u003e\u003cp\u003eVehicles with stop-start normally use an AGM or EFB battery sized for repeated restarts. If you replace it, use the same type and size, and follow the manufacturer's battery reset or registration step where one exists. A wrong or unregistered battery can leave the stop-start system disabled, and that has nothing to do with this module.\u003c\/p\u003e\u003ch2\u003eWhen the engine will not auto-stop anyway\u003c\/h2\u003e\u003cp\u003eEven with Auto Stop\/Start enabled, the engine control logic only stops the engine when conditions allow it. Typical blockers are a low battery state of charge, an engine that has not reached operating temperature, heavy heating or A\/C demand, steering input, an open door or unlatched seatbelt, and some drive modes. If the system never seems to stop the engine, one of these is usually the reason, and the module does not change that logic.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel year and model match a row in the table above (2019–2023 Chevrolet Traverse).\u003c\/li\u003e\n\u003cli\u003eYour Chevrolet Traverse has the factory stop-start button. Base trims or engines without stop-start have nothing for the module to remember.\u003c\/li\u003e\n\u003cli\u003eThe battery and charging system test good and no warning lights are on.\u003c\/li\u003e\n\u003cli\u003eThe connector at your install point matches the one in the product photos.\u003c\/li\u003e\n\u003cli\u003eNo aftermarket remote start, alarm or gateway bypass is wired into the same circuit. If one is, email support before ordering.\u003c\/li\u003e\n\u003cli\u003eIf you are unsure, send your VIN to support@automotivebypass.com and we will confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year\u003c\/h2\u003e\u003cp\u003eEach model year in the fitment data, listed separately:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine \/ trim\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTraverse\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTraverse\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTraverse\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTraverse\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTraverse\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAGM \/ EFB battery:\u003c\/strong\u003e Battery types designed for the frequent cycling of stop-start vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNon-latching:\u003c\/strong\u003e A setting that does not stay where the driver left it after a restart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto Stop\/Start:\u003c\/strong\u003e Chevrolet's name for the automatic engine stop-start feature on the Chevrolet Traverse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey cycle:\u003c\/strong\u003e One switch-off and restart of the vehicle. Factory stop-start resets at each key cycle.\u003c\/p\u003e\u003ch2\u003eWhy the factory default is always on\u003c\/h2\u003e\u003cp\u003eCar makers have a clear reason to make stop-start non-latching. For EPA ratings, a system that always re-enables itself is counted as on, while one that can stay off is tested on and off and the results averaged. The lower average is something no manufacturer wants on a window sticker, so the default returns at every key cycle.\u003c\/p\u003e\u003ch2\u003eBattery and starter on stop-start vehicles\u003c\/h2\u003e\u003cp\u003eVehicles with stop-start are built for many more engine starts than a conventional car. They typically use an AGM (absorbent glass mat) or EFB (enhanced flooded) battery that tolerates frequent cycling, along with a strengthened starter. The memory module does not change any of that hardware. When the battery reaches the end of its life, replace it with the same type and size listed for your vehicle, because a standard flooded battery is not designed for this duty.\u003c\/p\u003e\u003ch2\u003ePreparing for installation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSwitch everything off and take the key or fob out of range.\u003c\/li\u003e\n\u003cli\u003eGo through the model-specific instructions first.\u003c\/li\u003e\n\u003cli\u003eMatch the vehicle connector to the module before unplugging anything.\u003c\/li\u003e\n\u003cli\u003eRelease clips with a trim tool instead of pulling on wires.\u003c\/li\u003e\n\u003cli\u003eListen for the click on each latch.\u003c\/li\u003e\n\u003cli\u003eTie the module down so it stays quiet and away from moving parts.\u003c\/li\u003e\n\u003cli\u003eRun a restart test to confirm the memory works before refitting trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIf something is not right\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMemory does not hold:\u003c\/strong\u003e Re-seat both plugs until the locks click, then repeat the restart test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\"Unavailable\" or flashing indicator:\u003c\/strong\u003e A factory condition (battery charge, cabin temperature, engine temperature) is blocking stop-start. The module cannot override it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew dash message:\u003c\/strong\u003e Disconnect the module and restore the factory connection. If the message goes away, email support with the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto-stop still happens:\u003c\/strong\u003e The last selection was on. Turn Auto Stop\/Start off with the button; that state carries over from then on.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWill it fix a \"stop-start unavailable\" message?\u003c\/h3\u003e\u003cp\u003eNo. That message usually points to the battery or a sensor. Diagnose and repair that first.\u003c\/p\u003e\u003ch3\u003eWill Auto Stop\/Start come back on when I restart my Chevrolet Traverse?\u003c\/h3\u003e\u003cp\u003eNot if you turned it off before shutting down. The module repeats your last selection at the next start. If you leave it on, it stays on.\u003c\/p\u003e\u003ch3\u003eDoes the stop-start button still work after installation on the Chevrolet Traverse?\u003c\/h3\u003e\u003cp\u003eYes. The factory button works normally. The module simply stores whatever you chose last.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Traverse years does this fit?\u003c\/h3\u003e\u003cp\u003eThe listed range is 2019–2023. Check the fitment table on this page against your exact model year.\u003c\/p\u003e\u003ch3\u003eCan I remove it later?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and reconnect the factory connector; the vehicle returns to its stock default.\u003c\/p\u003e\u003ch3\u003eDoes my Chevrolet Traverse need the factory stop-start button for this to work?\u003c\/h3\u003e\u003cp\u003eYes. The module works with the factory stop-start system and its button. A vehicle built without stop-start has no setting for it to remember.\u003c\/p\u003e\u003ch3\u003eWhy does Auto Stop\/Start turn itself back on every time?\u003c\/h3\u003e\u003cp\u003eAutomakers set stop-start to default to on at each start. Under EPA test rules, a system that stays off after shutdown is tested both on and off and the results are averaged, which lowers the rated fuel economy, so most systems reset at every key cycle. The module carries your last choice across that reset.\u003c\/p\u003e\u003ch3\u003eIs this the same part for every Chevrolet?\u003c\/h3\u003e\u003cp\u003eNo. Connectors and the module that holds the stop-start state differ by platform, so this SKU is matched to the fitment rows on this page. Send the VIN to support if you are unsure.\u003c\/p\u003e\u003ch3\u003eDoes it change engine power or fuel trims?\u003c\/h3\u003e\u003cp\u003eNo. It does not reprogram the engine or transmission computers. It only stores the stop-start button state.\u003c\/p\u003e\u003ch3\u003eDoes it change how the battery is charged?\u003c\/h3\u003e\u003cp\u003eNo. Charging is still managed by the vehicle. Stop-start vehicles normally use an AGM or EFB battery built for frequent restarts; replace it with the same type when it wears out.\u003c\/p\u003e\u003ch3\u003eHow does it connect?\u003c\/h3\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003ch3\u003eWhat happens if I unplug it?\u003c\/h3\u003e\u003cp\u003eThe vehicle returns to the factory default, with Auto Stop\/Start switched on at every start.\u003c\/p\u003e\u003ch3\u003eWhy does my Chevrolet Traverse sometimes not auto-stop even when the system is on?\u003c\/h3\u003e\u003cp\u003eThe factory logic checks battery charge, engine temperature, climate load and other inputs. If any are outside range it keeps the engine running. The module does not affect those checks.\u003c\/p\u003e\u003ch2\u003eOrdering details\u003c\/h2\u003e\u003cp\u003eWe ship free within the contiguous United States (1–2 business days to dispatch, roughly 3–4 business days in transit). If it turns out to be the wrong part, request a return authorization within 45 days; returns carry a 20% restocking fee and return postage is on the buyer. Coverage is a 3-year limited warranty. Questions go to support@automotivebypass.com, weekdays 9 a.m. to 5 p.m. PST.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493783449972,"sku":"RC-ASSE-01-04","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/2019-2023_Chevrolet_Traverse_Auto_Start-Stop_Eliminators_1.jpg?v=1793347307","url":"https:\/\/automotivebypass.com\/products\/auto-start-stop-eliminator-2019-2023-chevrolet-traverse-auto-start-stop-eliminator","provider":"Automotivebypass","version":"1.0","type":"link"}