{"product_id":"auto-start-stop-eliminator-2019-2024-buick-enclave-auto-start-stop-eliminator","title":"2019-2024 Buick Enclave Auto Start Stop Eliminator","description":"\u003cp\u003eThis inline memory harness is for the 2019–2024 Buick Enclave. It stores the last stop-start setting you chose, so if you turned Auto Stop\/Start off on one drive, it stays off the next time you start the engine. It plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003cp\u003eThe factory button stays in place and still works. Press it and the module stores the new choice. Unplug the module and the vehicle goes back to stock behavior.\u003c\/p\u003e\u003ch2\u003eWhich Buick Enclave models it fits\u003c\/h2\u003e\u003cp\u003eEvery row below is listed as a 100% fitment match for this part:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBuick Enclave: 2019–2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eTrim levels are not split out in the table, so confirm that your vehicle has the stop-start button before ordering.\u003c\/p\u003e\u003ch2\u003eWhat the factory system does\u003c\/h2\u003e\u003cp\u003eOn the Buick Enclave, Auto Stop\/Start shuts the engine down at a stop and fires it back up as the brake is released. You can switch it off with the dash button, but the choice is not saved. The next ignition cycle brings the default back. The module keeps the choice you made instead.\u003c\/p\u003e\u003ch2\u003eBattery notes for stop-start vehicles\u003c\/h2\u003e\u003cp\u003eVehicles with stop-start normally use an AGM or EFB battery sized for repeated restarts. If you replace it, use the same type and size, and follow the manufacturer's battery reset or registration step where one exists. A wrong or unregistered battery can leave the stop-start system disabled, and that has nothing to do with this module.\u003c\/p\u003e\u003ch2\u003eScope of the module\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIt does not write anything to the vehicle's modules, and removing it restores the stock default.\u003c\/li\u003e\n\u003cli\u003eIt does not change engine power, transmission shifts, emissions calibration or fuel trims.\u003c\/li\u003e\n\u003cli\u003eIt leaves the factory button working, so you can turn stop-start back on whenever you want.\u003c\/li\u003e\n\u003cli\u003eIt remembers the last stop-start setting through a key cycle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIf stop-start is not engaging\u003c\/h2\u003e\u003cp\u003eThe factory system will skip an auto stop for many reasons: battery charge below its threshold, cold coolant, high climate-control load, a steep grade, the hood or driver door open, or a 4WD or tow mode on vehicles that have them. Those checks stay in control after this module is installed. It does not force stops and it does not bypass any of those safety inputs.\u003c\/p\u003e\u003ch2\u003eTypical reasons to keep it off\u003c\/h2\u003e\u003cp\u003eSome owners only want stop-start off in certain seasons or on certain trips, such as towing a trailer or crawling through summer traffic with the A\/C working hard. Because the module remembers whatever you chose last, it works both ways: leave the system off for a week, then switch it back on with the factory button and it stays on.\u003c\/p\u003e\u003ch2\u003eInstalling the inline memory harness\u003c\/h2\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced. Work with the ignition off. Seat each connector until its lock engages, then secure the module with the supplied ties or tape so it cannot rattle or touch pedals, steering parts or anything hot. Start the vehicle, press the stop-start button once, then restart to confirm the choice is held.\u003c\/p\u003e\u003ch2\u003eTroubleshooting notes\u003c\/h2\u003e\u003cp\u003eIf a \"stop-start unavailable\" or similar message appears, check the battery first. A battery that tests weak, a recent battery replacement that was not registered where the manufacturer requires it, or a fault in the battery current sensor can all disable the system. Clear up those issues before judging how the module works, because it cannot hold a setting the vehicle refuses to accept.\u003c\/p\u003e\u003ch2\u003eCheck before you order\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel year and model match a row in the table above (2019–2024 Buick Enclave).\u003c\/li\u003e\n\u003cli\u003eYour Buick Enclave has the factory stop-start button. Base trims or engines without stop-start have nothing for the module to remember.\u003c\/li\u003e\n\u003cli\u003eThe battery and charging system test good and no warning lights are on.\u003c\/li\u003e\n\u003cli\u003eNo aftermarket remote start, alarm or gateway bypass is wired into the same circuit. If one is, email support before ordering.\u003c\/li\u003e\n\u003cli\u003eThe connector at your install point matches the one in the product photos.\u003c\/li\u003e\n\u003cli\u003eIf you are unsure, send your VIN to support@automotivebypass.com and we will confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment table\u003c\/h2\u003e\u003cp\u003eOne row per model year, taken from the fitment data for this SKU:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine \/ trim\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eEnclave\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAGM \/ EFB battery:\u003c\/strong\u003e Battery types designed for the frequent cycling of stop-start vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey cycle:\u003c\/strong\u003e One switch-off and restart of the vehicle. Factory stop-start resets at each key cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNon-latching:\u003c\/strong\u003e A setting that does not stay where the driver left it after a restart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto Stop\/Start:\u003c\/strong\u003e Buick's name for the automatic engine stop-start feature on the Buick Enclave.\u003c\/p\u003e\u003ch2\u003eTroubleshooting after installation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMemory does not hold:\u003c\/strong\u003e Re-seat both plugs until the locks click, then repeat the restart test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\"Unavailable\" or flashing indicator:\u003c\/strong\u003e A factory condition (battery charge, cabin temperature, engine temperature) is blocking stop-start. The module cannot override it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew dash message:\u003c\/strong\u003e Disconnect the module and restore the factory connection. If the message goes away, email support with the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto-stop still happens:\u003c\/strong\u003e The last selection was on. Turn Auto Stop\/Start off with the button; that state carries over from then on.\u003c\/p\u003e\u003ch2\u003eWhat sits behind the system\u003c\/h2\u003e\u003cp\u003eVehicles with stop-start are built for many more engine starts than a conventional car. They typically use an AGM (absorbent glass mat) or EFB (enhanced flooded) battery that tolerates frequent cycling, along with a strengthened starter. The memory module does not change any of that hardware. When the battery reaches the end of its life, replace it with the same type and size listed for your vehicle, because a standard flooded battery is not designed for this duty.\u003c\/p\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIgnition off, transmission in Park, fob outside the cabin.\u003c\/li\u003e\n\u003cli\u003eInstructions for your exact model at hand.\u003c\/li\u003e\n\u003cli\u003eConnector location confirmed against the photos before any panel comes off.\u003c\/li\u003e\n\u003cli\u003eA plastic pry tool for clips, if the connector sits behind trim.\u003c\/li\u003e\n\u003cli\u003eBoth connector locks fully engaged after fitting.\u003c\/li\u003e\n\u003cli\u003eModule and lead fixed in place, clear of pedals, steering and heat.\u003c\/li\u003e\n\u003cli\u003eTest: choose your Auto Stop\/Start setting, turn the vehicle off, restart and check the indicator.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe reason the button has to be pressed every trip\u003c\/h2\u003e\u003cp\u003eThe factory behavior is tied to how fuel economy is rated in the US. A stop-start system that comes back on at each restart is rated with stop-start active. A system the driver can leave off would be tested both ways and averaged, which lowers the label figure. That is why Auto Stop\/Start on the Buick Enclave resets to on, and why a memory module is the way to keep your own preference.\u003c\/p\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eHow does it connect?\u003c\/h3\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003ch3\u003eDoes it change engine power or fuel trims?\u003c\/h3\u003e\u003cp\u003eNo. It does not reprogram the engine or transmission computers. It only stores the stop-start button state.\u003c\/p\u003e\u003ch3\u003eDoes the stop-start button still work after installation on the Buick Enclave?\u003c\/h3\u003e\u003cp\u003eYes. The factory button works normally. The module simply stores whatever you chose last.\u003c\/p\u003e\u003ch3\u003eWill Auto Stop\/Start come back on when I restart my Buick Enclave?\u003c\/h3\u003e\u003cp\u003eNot if you turned it off before shutting down. The module repeats your last selection at the next start. If you leave it on, it stays on.\u003c\/p\u003e\u003ch3\u003eWhich Buick Enclave years does this fit?\u003c\/h3\u003e\u003cp\u003eThe listed range is 2019–2024. Check the fitment table on this page against your exact model year.\u003c\/p\u003e\u003ch3\u003eWhy does Auto Stop\/Start turn itself back on every time?\u003c\/h3\u003e\u003cp\u003eAutomakers set stop-start to default to on at each start. Under EPA test rules, a system that stays off after shutdown is tested both on and off and the results are averaged, which lowers the rated fuel economy, so most systems reset at every key cycle. The module carries your last choice across that reset.\u003c\/p\u003e\u003ch3\u003eCan I remove it later?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and reconnect the factory connector; the vehicle returns to its stock default.\u003c\/p\u003e\u003ch3\u003eWhy does my Buick Enclave sometimes not auto-stop even when the system is on?\u003c\/h3\u003e\u003cp\u003eThe factory logic checks battery charge, engine temperature, climate load and other inputs. If any are outside range it keeps the engine running. The module does not affect those checks.\u003c\/p\u003e\u003ch3\u003eWill it fix a \"stop-start unavailable\" message?\u003c\/h3\u003e\u003cp\u003eNo. That message usually points to the battery or a sensor. Diagnose and repair that first.\u003c\/p\u003e\u003ch3\u003eIs this the same part for every Buick?\u003c\/h3\u003e\u003cp\u003eNo. Connectors and the module that holds the stop-start state differ by platform, so this SKU is matched to the fitment rows on this page. Send the VIN to support if you are unsure.\u003c\/p\u003e\u003ch3\u003eDoes it change how the battery is charged?\u003c\/h3\u003e\u003cp\u003eNo. Charging is still managed by the vehicle. Stop-start vehicles normally use an AGM or EFB battery built for frequent restarts; replace it with the same type when it wears out.\u003c\/p\u003e\u003ch3\u003eDoes my Buick Enclave need the factory stop-start button for this to work?\u003c\/h3\u003e\u003cp\u003eYes. The module works with the factory stop-start system and its button. A vehicle built without stop-start has no setting for it to remember.\u003c\/p\u003e\u003ch3\u003eWhat happens if I unplug it?\u003c\/h3\u003e\u003cp\u003eThe vehicle returns to the factory default, with Auto Stop\/Start switched on at every start.\u003c\/p\u003e\u003ch2\u003eShipping, returns and warranty\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785448820,"sku":"RC-ASSE-01-09","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/2019-2024_Buick_Enclave_Auto_Start-Stop_Eliminators_1.jpg?v=1793347345","url":"https:\/\/automotivebypass.com\/products\/auto-start-stop-eliminator-2019-2024-buick-enclave-auto-start-stop-eliminator","provider":"Automotivebypass","version":"1.0","type":"link"}