{"product_id":"auto-start-stop-eliminator-2019-2024-chevrolet-blazer-auto-start-stop-eliminator","title":"2019-2024 Chevrolet Blazer Auto Start Stop Eliminator | Plug \u0026 Play","description":"\u003cp\u003eThis plug-and-play memory harness is for the 2019–2024 Chevrolet Blazer. It stores the last stop-start setting you chose, so if you turned Auto Stop\/Start off on one drive, it stays off the next time you start the engine. It plugs in line with the factory connector named in the instructions, using factory-style plugs on both ends, so nothing is cut or spliced.\u003c\/p\u003e\u003cp\u003eNothing is reprogrammed in the engine computer. The module only stands in for the button press you would otherwise make after every start, and it comes out without leaving a trace.\u003c\/p\u003e\u003ch2\u003eWhich Chevrolet Blazer models it fits\u003c\/h2\u003e\u003cp\u003eThis part is listed for these vehicles, all marked 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eChevrolet Blazer: 2019–2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFor reference, the Chevrolet Blazer in these years is a midsize crossover offered with 2.5L four-cylinder, 2.0L turbo and 3.6L V6 engines. The listing is written around the first-generation (2019-up) Blazer. The table does not separate trims; what matters is that the vehicle has factory stop-start and the connector shown in the photos.\u003c\/p\u003e\u003ch2\u003eWhat the factory system does\u003c\/h2\u003e\u003cp\u003eOn the Chevrolet Blazer, Auto Stop\/Start shuts the engine down at a stop and fires it back up as the brake is released. You can switch it off with the dash button, but the choice is not saved. The next ignition cycle brings the default back. The module keeps the choice you made instead.\u003c\/p\u003e\u003ch2\u003eInstalling the plug-and-play memory harness\u003c\/h2\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions, using factory-style plugs on both ends, so nothing is cut or spliced. Because it is plug-in only, removal is the reverse: unplug the module and reconnect the factory connectors directly. Keep the original clips and trim fasteners if you remove a panel to reach the connector.\u003c\/p\u003e\u003ch2\u003eConditions the factory system checks\u003c\/h2\u003e\u003cp\u003eEven with Auto Stop\/Start enabled, the engine control logic only stops the engine when conditions allow it. Typical blockers are a low battery state of charge, an engine that has not reached operating temperature, heavy heating or A\/C demand, steering input, an open door or unlatched seatbelt, and some drive modes. If the system never seems to stop the engine, one of these is usually the reason, and the module does not change that logic.\u003c\/p\u003e\u003ch2\u003eWhat the module does and does not do\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIt does not change engine power, transmission shifts, emissions calibration or fuel trims.\u003c\/li\u003e\n\u003cli\u003eIt remembers the last stop-start setting through a key cycle.\u003c\/li\u003e\n\u003cli\u003eIt leaves the factory button working, so you can turn stop-start back on whenever you want.\u003c\/li\u003e\n\u003cli\u003eIt does not write anything to the vehicle's modules, and removing it restores the stock default.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA note on the battery\u003c\/h2\u003e\u003cp\u003eMost stop-start systems watch battery condition closely through a sensor on the negative terminal. When the battery ages, the system quietly stops auto-stopping long before the battery fails to crank. Keeping the original battery type (AGM or EFB) and a clean, tight ground connection avoids a lot of confusion about why the system behaves differently from week to week.\u003c\/p\u003e\u003ch2\u003eTypical reasons to keep it off\u003c\/h2\u003e\u003cp\u003eDrivers usually switch stop-start off for comfort or habit. A restart at every stop is noticeable in a midsize crossover, the climate system may run at reduced output while the engine is off, and quick moves into traffic feel slower when the engine has to fire first. If those are your reasons, you probably press the button on every drive now. With the module, you press it once.\u003c\/p\u003e\u003ch2\u003eIf something does not look right\u003c\/h2\u003e\u003cp\u003eIf the setting is not remembered, check that the module was installed with the ignition off and that the connector clicked into place. Then press the factory button once, switch the vehicle off, close the doors, give the electronics time to shut down, and start again. If it still resets, contact support with the year, trim and a photo of the connector.\u003c\/p\u003e\u003ch2\u003eFitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel year and model match a row in the table above (2019–2024 Chevrolet Blazer).\u003c\/li\u003e\n\u003cli\u003eYour Chevrolet Blazer has the factory stop-start button. Base trims or engines without stop-start have nothing for the module to remember.\u003c\/li\u003e\n\u003cli\u003eThe connector at your install point matches the one in the product photos.\u003c\/li\u003e\n\u003cli\u003eNo aftermarket remote start, alarm or gateway bypass is wired into the same circuit. If one is, email support before ordering.\u003c\/li\u003e\n\u003cli\u003eThe battery and charging system test good and no warning lights are on.\u003c\/li\u003e\n\u003cli\u003eIf you are unsure, send your VIN to support@automotivebypass.com and we will confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eThe full fitment data for this part, by year:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine \/ trim\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAuto Stop\/Start:\u003c\/strong\u003e Chevrolet's name for the automatic engine stop-start feature on the Chevrolet Blazer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNon-latching:\u003c\/strong\u003e A setting that does not stay where the driver left it after a restart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAGM \/ EFB battery:\u003c\/strong\u003e Battery types designed for the frequent cycling of stop-start vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey cycle:\u003c\/strong\u003e One switch-off and restart of the vehicle. Factory stop-start resets at each key cycle.\u003c\/p\u003e\u003ch2\u003ePreparing for installation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePark on level ground, shift to Park, switch the ignition off and keep the key or fob away from the vehicle.\u003c\/li\u003e\n\u003cli\u003eRead the included instructions for your model before removing any trim.\u003c\/li\u003e\n\u003cli\u003eLocate the connector named in the instructions and compare it with the plugs on the module.\u003c\/li\u003e\n\u003cli\u003eUse a plastic trim tool where a panel has to be eased out, to avoid marking the dash.\u003c\/li\u003e\n\u003cli\u003ePress each connector until the lock clicks; never force a plug that does not line up.\u003c\/li\u003e\n\u003cli\u003eSecure the module with the supplied tie or tape so it cannot rattle or touch moving parts.\u003c\/li\u003e\n\u003cli\u003eStart the vehicle, set Auto Stop\/Start the way you want it, switch off, restart and confirm the setting held.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTroubleshooting after installation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eChoice is forgotten after restart:\u003c\/strong\u003e A plug is usually not fully home. Push each until it latches and test again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIndicator says the system is unavailable:\u003c\/strong\u003e The vehicle has decided conditions are not right for an automatic stop. This is normal factory behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning appears:\u003c\/strong\u003e Remove the module, reconnect the original plug and confirm the warning clears, then contact support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine keeps shutting off at stops:\u003c\/strong\u003e Switch Auto Stop\/Start off once. The module stores the off state for the next start.\u003c\/p\u003e\u003ch2\u003eWhat sits behind the system\u003c\/h2\u003e\u003cp\u003eTo cope with repeated restarts, stop-start vehicles normally carry an AGM or EFB battery and a heavier-duty starter, and the system watches battery charge closely. If the battery is weak, the vehicle will skip automatic stops on its own. The module leaves this hardware and its monitoring alone. Use the factory battery type when replacing it, and check the owner's manual for any battery reset step after replacement.\u003c\/p\u003e\u003ch2\u003eThe reason the button has to be pressed every trip\u003c\/h2\u003e\u003cp\u003eThe factory behavior is tied to how fuel economy is rated in the US. A stop-start system that comes back on at each restart is rated with stop-start active. A system the driver can leave off would be tested both ways and averaged, which lowers the label figure. That is why Auto Stop\/Start on the Chevrolet Blazer resets to on, and why a memory module is the way to keep your own preference.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes the stop-start button still work after installation on the Chevrolet Blazer?\u003c\/h3\u003e\u003cp\u003eYes. The factory button works normally. The module simply stores whatever you chose last.\u003c\/p\u003e\u003ch3\u003eWill Auto Stop\/Start come back on when I restart my Chevrolet Blazer?\u003c\/h3\u003e\u003cp\u003eNot if you turned it off before shutting down. The module repeats your last selection at the next start. If you leave it on, it stays on.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Blazer years does this fit?\u003c\/h3\u003e\u003cp\u003eThe listed range is 2019–2024. Check the fitment table on this page against your exact model year.\u003c\/p\u003e\u003ch3\u003eHow does it connect?\u003c\/h3\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions, using factory-style plugs on both ends, so nothing is cut or spliced.\u003c\/p\u003e\u003ch3\u003eWhy does my Chevrolet Blazer sometimes not auto-stop even when the system is on?\u003c\/h3\u003e\u003cp\u003eThe factory logic checks battery charge, engine temperature, climate load and other inputs. If any are outside range it keeps the engine running. The module does not affect those checks.\u003c\/p\u003e\u003ch3\u003eDoes it change engine power or fuel trims?\u003c\/h3\u003e\u003cp\u003eNo. It does not reprogram the engine or transmission computers. It only stores the stop-start button state.\u003c\/p\u003e\u003ch3\u003eWhy does Auto Stop\/Start turn itself back on every time?\u003c\/h3\u003e\u003cp\u003eAutomakers set stop-start to default to on at each start. Under EPA test rules, a system that stays off after shutdown is tested both on and off and the results are averaged, which lowers the rated fuel economy, so most systems reset at every key cycle. The module carries your last choice across that reset.\u003c\/p\u003e\u003ch3\u003eWill it fix a \"stop-start unavailable\" message?\u003c\/h3\u003e\u003cp\u003eNo. That message usually points to the battery or a sensor. Diagnose and repair that first.\u003c\/p\u003e\u003ch3\u003eDoes my Chevrolet Blazer need the factory stop-start button for this to work?\u003c\/h3\u003e\u003cp\u003eYes. The module works with the factory stop-start system and its button. A vehicle built without stop-start has no setting for it to remember.\u003c\/p\u003e\u003ch3\u003eCan I remove it later?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and reconnect the factory connector; the vehicle returns to its stock default.\u003c\/p\u003e\u003ch3\u003eDoes it change how the battery is charged?\u003c\/h3\u003e\u003cp\u003eNo. Charging is still managed by the vehicle. Stop-start vehicles normally use an AGM or EFB battery built for frequent restarts; replace it with the same type when it wears out.\u003c\/p\u003e\u003ch3\u003eIs this the same part for every Chevrolet?\u003c\/h3\u003e\u003cp\u003eNo. Connectors and the module that holds the stop-start state differ by platform, so this SKU is matched to the fitment rows on this page. Send the VIN to support if you are unsure.\u003c\/p\u003e\u003ch3\u003eWhat happens if I unplug it?\u003c\/h3\u003e\u003cp\u003eThe vehicle returns to the factory default, with Auto Stop\/Start switched on at every start.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493795737972,"sku":"RC-ASSE-16-04","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/2019-2024_Chevrolet_Blazer_Auto_Start-Stop_Eliminators_1.jpg?v=1793347585","url":"https:\/\/automotivebypass.com\/products\/auto-start-stop-eliminator-2019-2024-chevrolet-blazer-auto-start-stop-eliminator","provider":"Automotivebypass","version":"1.0","type":"link"}