{"product_id":"auto-start-stop-eliminator-2021-2024-chevrolet-blazer-auto-start-stop-eliminator","title":"2021-2024 Chevrolet Blazer Auto Start Stop Eliminator","description":"\u003cp\u003eFits the 2021–2024 Chevrolet Blazer. The inline memory harness remembers the position of the stop-start button between drives, so the engine no longer shuts off at the first red light after every restart unless you want it to. It plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003cp\u003eIt does not delete the feature. Turning stop-start back on is the same button press as before, and the module will remember that too. Removing it returns the vehicle to its original default.\u003c\/p\u003e\u003ch2\u003eWhich Chevrolet Blazer models it fits\u003c\/h2\u003e\u003cp\u003eListed applications (each row is a 100% fitment match for the factory connector this part uses):\u003c\/p\u003e\u003cul\u003e\u003cli\u003eChevrolet Blazer: 2021–2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFor reference, the Chevrolet Blazer in these years is a midsize crossover offered with 2.5L four-cylinder, 2.0L turbo and 3.6L V6 engines. The listing is written around the first-generation (2019-up) Blazer. Trim is not listed separately. Any trim in these years with factory stop-start and the pictured connector is covered.\u003c\/p\u003e\u003ch2\u003eWhy the button resets\u003c\/h2\u003e\u003cp\u003eAuto Stop\/Start is designed to default to on. The off switch (usually marked with an \"A\" inside a circular arrow) cancels it for the current drive. At the next start the system is armed again. That reset is intentional on the manufacturer's side, and it is the only behavior this module changes.\u003c\/p\u003e\u003ch2\u003eScope of the module\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDoes not disable warning lights or diagnostic functions.\u003c\/li\u003e\n\u003cli\u003eCarries your stop-start choice over to the next drive.\u003c\/li\u003e\n\u003cli\u003eComes out in the same way it went in, with nothing cut.\u003c\/li\u003e\n\u003cli\u003eFuel use changes only the way it would if you pressed the off button yourself.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTroubleshooting notes\u003c\/h2\u003e\u003cp\u003eIf the setting is not remembered, check that the module was installed with the ignition off and that the connector clicked into place. Then press the factory button once, switch the vehicle off, close the doors, give the electronics time to shut down, and start again. If it still resets, contact support with the year, trim and a photo of the connector.\u003c\/p\u003e\u003ch2\u003eKeep the battery healthy\u003c\/h2\u003e\u003cp\u003eIf the stop-start indicator shows the system as unavailable, test the battery before anything else. On stop-start vehicles that is the most common cause. A replacement should match the original specification (AGM or EFB), and some manufacturers call for a battery monitor reset after the swap.\u003c\/p\u003e\u003ch2\u003eInstalling the inline memory harness\u003c\/h2\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced. Because it is plug-in only, removal is the reverse: unplug the module and reconnect the factory connectors directly. Keep the original clips and trim fasteners if you remove a panel to reach the connector.\u003c\/p\u003e\u003ch2\u003eIf stop-start is not engaging\u003c\/h2\u003e\u003cp\u003eAuto stop needs several conditions at once: a warm engine, enough battery charge, moderate cabin heating or cooling demand, and the vehicle fully stopped with the brake held. If any is missing, the engine keeps running. The module only remembers the button state; the factory controller still decides whether a stop is allowed.\u003c\/p\u003e\u003ch2\u003eTypical reasons to keep it off\u003c\/h2\u003e\u003cp\u003eStop-start saves the most fuel in long idles, but plenty of drivers would rather keep the engine running. Common reasons: towing or hauling, where an engine restart under load is unwelcome; drive-thru lines and parking lots, where the engine cycles on and off every few feet; hot days, when the A\/C compressor stops with the engine on many vehicles; and stop-and-go traffic where the restart delay is noticeable when pulling into a gap. On a midsize crossover, any of these can mean a button press at the start of nearly every drive.\u003c\/p\u003e\u003ch2\u003eCheck before you order\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel year and model match a row in the table above (2021–2024 Chevrolet Blazer).\u003c\/li\u003e\n\u003cli\u003eYour Chevrolet Blazer has the factory stop-start button. Base trims or engines without stop-start have nothing for the module to remember.\u003c\/li\u003e\n\u003cli\u003eThe connector at your install point matches the one in the product photos.\u003c\/li\u003e\n\u003cli\u003eThe battery and charging system test good and no warning lights are on.\u003c\/li\u003e\n\u003cli\u003eNo aftermarket remote start, alarm or gateway bypass is wired into the same circuit. If one is, email support before ordering.\u003c\/li\u003e\n\u003cli\u003eIf you are unsure, send your VIN to support@automotivebypass.com and we will confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEvery listed year\u003c\/h2\u003e\u003cp\u003eEach model year in the fitment data, listed separately:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine \/ trim\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eHardware built for frequent restarts\u003c\/h2\u003e\u003cp\u003eTo cope with repeated restarts, stop-start vehicles normally carry an AGM or EFB battery and a heavier-duty starter, and the system watches battery charge closely. If the battery is weak, the vehicle will skip automatic stops on its own. The module leaves this hardware and its monitoring alone. Use the factory battery type when replacing it, and check the owner's manual for any battery reset step after replacement.\u003c\/p\u003e\u003ch2\u003eBefore you plug it in\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSwitch everything off and take the key or fob out of range.\u003c\/li\u003e\n\u003cli\u003eGo through the model-specific instructions first.\u003c\/li\u003e\n\u003cli\u003eMatch the vehicle connector to the module before unplugging anything.\u003c\/li\u003e\n\u003cli\u003eRelease clips with a trim tool instead of pulling on wires.\u003c\/li\u003e\n\u003cli\u003eListen for the click on each latch.\u003c\/li\u003e\n\u003cli\u003eTie the module down so it stays quiet and away from moving parts.\u003c\/li\u003e\n\u003cli\u003eRun a restart test to confirm the memory works before refitting trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuick definitions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eKey cycle:\u003c\/strong\u003e One switch-off and restart of the vehicle. Factory stop-start resets at each key cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNon-latching:\u003c\/strong\u003e A setting that does not stay where the driver left it after a restart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto Stop\/Start:\u003c\/strong\u003e Chevrolet's name for the automatic engine stop-start feature on the Chevrolet Blazer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAGM \/ EFB battery:\u003c\/strong\u003e Battery types designed for the frequent cycling of stop-start vehicles.\u003c\/p\u003e\u003ch2\u003eWhy stop-start resets at every start\u003c\/h2\u003e\u003cp\u003eThe factory behavior is tied to how fuel economy is rated in the US. A stop-start system that comes back on at each restart is rated with stop-start active. A system the driver can leave off would be tested both ways and averaged, which lowers the label figure. That is why Auto Stop\/Start on the Chevrolet Blazer resets to on, and why a memory module is the way to keep your own preference.\u003c\/p\u003e\u003ch2\u003eCommon questions after fitting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eChoice is forgotten after restart:\u003c\/strong\u003e A plug is usually not fully home. Push each until it latches and test again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIndicator says the system is unavailable:\u003c\/strong\u003e The vehicle has decided conditions are not right for an automatic stop. This is normal factory behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning appears:\u003c\/strong\u003e Remove the module, reconnect the original plug and confirm the warning clears, then contact support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine keeps shutting off at stops:\u003c\/strong\u003e Switch Auto Stop\/Start off once. The module stores the off state for the next start.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWill Auto Stop\/Start come back on when I restart my Chevrolet Blazer?\u003c\/h3\u003e\u003cp\u003eNot if you turned it off before shutting down. The module repeats your last selection at the next start. If you leave it on, it stays on.\u003c\/p\u003e\u003ch3\u003eWhich Chevrolet Blazer years does this fit?\u003c\/h3\u003e\u003cp\u003eThe listed range is 2021–2024. Check the fitment table on this page against your exact model year.\u003c\/p\u003e\u003ch3\u003eDoes the stop-start button still work after installation on the Chevrolet Blazer?\u003c\/h3\u003e\u003cp\u003eYes. The factory button works normally. The module simply stores whatever you chose last.\u003c\/p\u003e\u003ch3\u003eCan I remove it later?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and reconnect the factory connector; the vehicle returns to its stock default.\u003c\/p\u003e\u003ch3\u003eDoes it change engine power or fuel trims?\u003c\/h3\u003e\u003cp\u003eNo. It does not reprogram the engine or transmission computers. It only stores the stop-start button state.\u003c\/p\u003e\u003ch3\u003eIs this the same part for every Chevrolet?\u003c\/h3\u003e\u003cp\u003eNo. Connectors and the module that holds the stop-start state differ by platform, so this SKU is matched to the fitment rows on this page. Send the VIN to support if you are unsure.\u003c\/p\u003e\u003ch3\u003eWhat happens if I unplug it?\u003c\/h3\u003e\u003cp\u003eThe vehicle returns to the factory default, with Auto Stop\/Start switched on at every start.\u003c\/p\u003e\u003ch3\u003eWhy does Auto Stop\/Start turn itself back on every time?\u003c\/h3\u003e\u003cp\u003eAutomakers set stop-start to default to on at each start. Under EPA test rules, a system that stays off after shutdown is tested both on and off and the results are averaged, which lowers the rated fuel economy, so most systems reset at every key cycle. The module carries your last choice across that reset.\u003c\/p\u003e\u003ch3\u003eWhy does my Chevrolet Blazer sometimes not auto-stop even when the system is on?\u003c\/h3\u003e\u003cp\u003eThe factory logic checks battery charge, engine temperature, climate load and other inputs. If any are outside range it keeps the engine running. The module does not affect those checks.\u003c\/p\u003e\u003ch3\u003eDoes my Chevrolet Blazer need the factory stop-start button for this to work?\u003c\/h3\u003e\u003cp\u003eYes. The module works with the factory stop-start system and its button. A vehicle built without stop-start has no setting for it to remember.\u003c\/p\u003e\u003ch3\u003eHow does it connect?\u003c\/h3\u003e\u003cp\u003eIt plugs in line with the factory connector named in the instructions. Both ends are factory-style plugs, so nothing is cut or spliced.\u003c\/p\u003e\u003ch3\u003eDoes it change how the battery is charged?\u003c\/h3\u003e\u003cp\u003eNo. Charging is still managed by the vehicle. Stop-start vehicles normally use an AGM or EFB battery built for frequent restarts; replace it with the same type when it wears out.\u003c\/p\u003e\u003ch3\u003eWill it fix a \"stop-start unavailable\" message?\u003c\/h3\u003e\u003cp\u003eNo. That message usually points to the battery or a sensor. Diagnose and repair that first.\u003c\/p\u003e\u003ch2\u003eShipping, returns and warranty\u003c\/h2\u003e\u003cp\u003eFree standard shipping covers the contiguous US, with dispatch in 1–2 business days and 3–4 days on the road after that. You have 45 days to request a return (pre-approval required, 20% restocking fee, buyer-paid return shipping). The module is backed by a 3-year limited warranty. For order or fitment questions, write to support@automotivebypass.com between 9 and 5 Pacific, Monday through Friday.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493784334708,"sku":"RC-ASSE-01-05","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/2021-2024_Chevrolet_Blazer_Auto_Start-Stop_Eliminators_1.jpg?v=1793347316","url":"https:\/\/automotivebypass.com\/products\/auto-start-stop-eliminator-2021-2024-chevrolet-blazer-auto-start-stop-eliminator","provider":"Automotivebypass","version":"1.0","type":"link"}