{"product_id":"auto-start-stop-eliminator-2025-2026-subaru-forester-gateway-memory-harness","title":"2025-2026 Subaru Forester Auto Start Stop Eliminator | Gateway Memory Harness","description":"\u003cp\u003eA gateway memory harness for the 2025–2026 Subaru Forester. Out of the factory, Auto Start Stop comes back on at every key cycle. This module remembers your last choice and sends it again at the next start. It plugs in at the gateway module connector, between the factory plug and the module, so the stored setting is applied where the vehicle network passes the stop-start request.\u003c\/p\u003e\u003cp\u003eYou can still use the original button at any time. Whatever you select last is what the module repeats on the next start. Take the module out and the vehicle behaves exactly as it did from the factory.\u003c\/p\u003e\u003ch2\u003eWhich Subaru Forester models it fits\u003c\/h2\u003e\u003cp\u003eListed applications (each row is a 100% fitment match for the factory connector this part uses):\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSubaru Forester: 2025–2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe table does not separate trims; what matters is that the vehicle has factory stop-start and the connector shown in the photos.\u003c\/p\u003e\u003ch2\u003eWhat the factory system does\u003c\/h2\u003e\u003cp\u003eEach start of the Subaru Forester begins with Auto Start Stop enabled. The switch on the dash can disable it, but only until the key is cycled. This module records the switch position and repeats it after the restart, which is the entire job it does.\u003c\/p\u003e\u003ch2\u003eWhy owners turn it off\u003c\/h2\u003e\u003cp\u003ePressing the same button on every drive is what wears on owners. People who tow, plow, idle in pickup lines, creep through heavy traffic or simply want the engine running at a light end up making the same press dozens of times a week. On the Subaru Forester, the module turns that into a one-time choice you can still change whenever you want.\u003c\/p\u003e\u003ch2\u003eBattery notes for stop-start vehicles\u003c\/h2\u003e\u003cp\u003eThe module draws its power from the vehicle and does not change charging behavior. If your Subaru Forester sits for long periods, the same rules apply as without it: a maintainer helps, and a battery that tests weak should be replaced with the type specified for stop-start vehicles (usually AGM or EFB).\u003c\/p\u003e\u003ch2\u003eBefore blaming the module\u003c\/h2\u003e\u003cp\u003eIf a \"stop-start unavailable\" or similar message appears, check the battery first. A battery that tests weak, a recent battery replacement that was not registered where the manufacturer requires it, or a fault in the battery current sensor can all disable the system. Clear up those issues before judging how the module works, because it cannot hold a setting the vehicle refuses to accept.\u003c\/p\u003e\u003ch2\u003eIf stop-start is not engaging\u003c\/h2\u003e\u003cp\u003eA Subaru Forester that rarely auto-stops is often telling you something about the battery. Stop-start vehicles usually run an AGM or EFB battery, and the system is one of the first features to drop out as that battery ages. Cabin temperature requests, engine temperature and brake pressure also factor in. None of these checks are altered by the module.\u003c\/p\u003e\u003ch2\u003eConnecting it\u003c\/h2\u003e\u003cp\u003eIt plugs in at the gateway module connector, between the factory plug and the module, so the stored setting is applied where the vehicle network passes the stop-start request. Because it is plug-in only, removal is the reverse: unplug the module and reconnect the factory connectors directly. Keep the original clips and trim fasteners if you remove a panel to reach the connector.\u003c\/p\u003e\u003ch2\u003eWhat to expect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLeaves engine and transmission software untouched.\u003c\/li\u003e\n\u003cli\u003eHolds the stop-start button state between drives.\u003c\/li\u003e\n\u003cli\u003eLets you re-enable the system with the factory button at any time.\u003c\/li\u003e\n\u003cli\u003eLeaves no permanent change after removal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuick fitment check\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel year and model match a row in the table above (2025–2026 Subaru Forester).\u003c\/li\u003e\n\u003cli\u003eYour Subaru Forester has the factory stop-start button. Base trims or engines without stop-start have nothing for the module to remember.\u003c\/li\u003e\n\u003cli\u003eNo aftermarket remote start, alarm or gateway bypass is wired into the same circuit. If one is, email support before ordering.\u003c\/li\u003e\n\u003cli\u003eThe battery and charging system test good and no warning lights are on.\u003c\/li\u003e\n\u003cli\u003eThe connector at your install point matches the one in the product photos.\u003c\/li\u003e\n\u003cli\u003eIf you are unsure, send your VIN to support@automotivebypass.com and we will confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eEach model year in the fitment data, listed separately:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine \/ trim\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eForester\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2026\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eForester\u003c\/td\u003e\n\u003ctd\u003eAll with factory stop-start\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eInstall prep checklist\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSwitch everything off and take the key or fob out of range.\u003c\/li\u003e\n\u003cli\u003eGo through the model-specific instructions first.\u003c\/li\u003e\n\u003cli\u003eMatch the vehicle connector to the module before unplugging anything.\u003c\/li\u003e\n\u003cli\u003eRelease clips with a trim tool instead of pulling on wires.\u003c\/li\u003e\n\u003cli\u003eListen for the click on each latch.\u003c\/li\u003e\n\u003cli\u003eTie the module down so it stays quiet and away from moving parts.\u003c\/li\u003e\n\u003cli\u003eRun a restart test to confirm the memory works before refitting trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy stop-start resets at every start\u003c\/h2\u003e\u003cp\u003eThe factory behavior is tied to how fuel economy is rated in the US. A stop-start system that comes back on at each restart is rated with stop-start active. A system the driver can leave off would be tested both ways and averaged, which lowers the label figure. That is why Auto Start Stop on the Subaru Forester resets to on, and why a memory module is the way to keep your own preference.\u003c\/p\u003e\u003ch2\u003eHardware built for frequent restarts\u003c\/h2\u003e\u003cp\u003eStop-start puts extra load on the battery and starter, so manufacturers fit an AGM or enhanced flooded (EFB) battery and a starter rated for more cycles. Battery state is one of the inputs that decides whether the engine may stop. With the module installed the same rules apply, and the same battery type should be used when it is replaced.\u003c\/p\u003e\u003ch2\u003eGlossary\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eKey cycle:\u003c\/strong\u003e One switch-off and restart of the vehicle. Factory stop-start resets at each key cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto Start Stop:\u003c\/strong\u003e Subaru's name for the automatic engine stop-start feature on the Subaru Forester.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAGM \/ EFB battery:\u003c\/strong\u003e Battery types designed for the frequent cycling of stop-start vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNon-latching:\u003c\/strong\u003e A setting that does not stay where the driver left it after a restart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGateway module:\u003c\/strong\u003e The module that routes messages between vehicle networks; the harness connects at its connector.\u003c\/p\u003e\u003ch2\u003eIf something is not right\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMemory does not hold:\u003c\/strong\u003e Re-seat both plugs until the locks click, then repeat the restart test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\"Unavailable\" or flashing indicator:\u003c\/strong\u003e A factory condition (battery charge, cabin temperature, engine temperature) is blocking stop-start. The module cannot override it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew dash message:\u003c\/strong\u003e Disconnect the module and restore the factory connection. If the message goes away, email support with the VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto-stop still happens:\u003c\/strong\u003e The last selection was on. Turn Auto Start Stop off with the button; that state carries over from then on.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eHow does it connect?\u003c\/h3\u003e\u003cp\u003eIt plugs in at the gateway module connector, between the factory plug and the module, so the stored setting is applied where the vehicle network passes the stop-start request.\u003c\/p\u003e\u003ch3\u003eDoes the stop-start button still work after installation on the Subaru Forester?\u003c\/h3\u003e\u003cp\u003eYes. The factory button works normally. The module simply stores whatever you chose last.\u003c\/p\u003e\u003ch3\u003eWhich Subaru Forester years does this fit?\u003c\/h3\u003e\u003cp\u003eThe listed range is 2025–2026. Check the fitment table on this page against your exact model year.\u003c\/p\u003e\u003ch3\u003eWill Auto Start Stop come back on when I restart my Subaru Forester?\u003c\/h3\u003e\u003cp\u003eNot if you turned it off before shutting down. The module repeats your last selection at the next start. If you leave it on, it stays on.\u003c\/p\u003e\u003ch3\u003eCan I remove it later?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and reconnect the factory connector; the vehicle returns to its stock default.\u003c\/p\u003e\u003ch3\u003eIs this the same part for every Subaru?\u003c\/h3\u003e\u003cp\u003eNo. Connectors and the module that holds the stop-start state differ by platform, so this SKU is matched to the fitment rows on this page. Send the VIN to support if you are unsure.\u003c\/p\u003e\u003ch3\u003eWhat happens if I unplug it?\u003c\/h3\u003e\u003cp\u003eThe vehicle returns to the factory default, with Auto Start Stop switched on at every start.\u003c\/p\u003e\u003ch3\u003eDoes it change how the battery is charged?\u003c\/h3\u003e\u003cp\u003eNo. Charging is still managed by the vehicle. Stop-start vehicles normally use an AGM or EFB battery built for frequent restarts; replace it with the same type when it wears out.\u003c\/p\u003e\u003ch3\u003eDoes my Subaru Forester need the factory stop-start button for this to work?\u003c\/h3\u003e\u003cp\u003eYes. The module works with the factory stop-start system and its button. A vehicle built without stop-start has no setting for it to remember.\u003c\/p\u003e\u003ch3\u003eWhy does Auto Start Stop turn itself back on every time?\u003c\/h3\u003e\u003cp\u003eAutomakers set stop-start to default to on at each start. Under EPA test rules, a system that stays off after shutdown is tested both on and off and the results are averaged, which lowers the rated fuel economy, so most systems reset at every key cycle. The module carries your last choice across that reset.\u003c\/p\u003e\u003ch3\u003eWhy does my Subaru Forester sometimes not auto-stop even when the system is on?\u003c\/h3\u003e\u003cp\u003eThe factory logic checks battery charge, engine temperature, climate load and other inputs. If any are outside range it keeps the engine running. The module does not affect those checks.\u003c\/p\u003e\u003ch3\u003eDoes it change engine power or fuel trims?\u003c\/h3\u003e\u003cp\u003eNo. It does not reprogram the engine or transmission computers. It only stores the stop-start button state.\u003c\/p\u003e\u003ch3\u003eWill it fix a \"stop-start unavailable\" message?\u003c\/h3\u003e\u003cp\u003eNo. That message usually points to the battery or a sensor. Diagnose and repair that first.\u003c\/p\u003e\u003ch2\u003eShipping, returns and warranty\u003c\/h2\u003e\u003cp\u003eShipping is free to the contiguous US. Orders leave in 1–2 business days and usually arrive 3–4 business days later. Returns are accepted within 45 days with pre-approval; a 20% restocking fee applies and the buyer covers return shipping. The part carries a 3-year limited warranty, and support@automotivebypass.com answers Monday to Friday, 9–5 Pacific.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493811630452,"sku":"RC-ASSE-37-03","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/2025-2026_Subarud_Forester_Auto_Start-Stop_Eliminators_1.jpg?v=1793347971","url":"https:\/\/automotivebypass.com\/products\/auto-start-stop-eliminator-2025-2026-subaru-forester-gateway-memory-harness","provider":"Automotivebypass","version":"1.0","type":"link"}