{"product_id":"cadillac-xts-2013-2018-36l-v6-afm-dfm-disabler","title":"Cadillac XTS 2013-2018 3.6L V6 AFM\/DFM Disabler","description":"\u003cp\u003eFits the 2013–2018 Cadillac XTS. The module connects at the OBD-II port and keeps GM's cylinder deactivation from switching on, which means steady all-cylinder operation instead of repeated changes between full and partial mode. Installation is plugging it in. Nothing is spliced, flashed or removed from the engine, and the factory system resumes as soon as the module is unplugged.\u003c\/p\u003e\u003ch2\u003eVehicles, years and engines\u003c\/h2\u003e\u003cp\u003eEach row below is listed as a 100% fitment match:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2013–2018 Cadillac XTS: 3.6L V6\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGM used several V6 families in these years. Before ordering, confirm from your RPO label or VIN that your engine is the one listed and that it is equipped with cylinder deactivation; if in doubt, send the VIN to support.\u003c\/p\u003e\u003ch2\u003eHow GM cylinder deactivation works\u003c\/h2\u003e\u003cp\u003eCylinder deactivation shuts off fuel and valve operation on part of the engine at light load, then brings those cylinders back when you need power. The engine computer decides when to switch based on load, speed and other inputs. This module works through the OBD-II port to keep the computer from choosing the reduced mode.\u003c\/p\u003e\u003ch2\u003eWhat to expect on the road\u003c\/h2\u003e\u003cp\u003eExpect steadier behavior at part throttle and no change at wide-open throttle. Towing and hill climbing were already mostly done on all cylinders, so the biggest change is during relaxed cruising. Average fuel economy may drop slightly depending on how much of your driving is light-load highway time.\u003c\/p\u003e\u003ch2\u003eOil and maintenance\u003c\/h2\u003e\u003cp\u003eAFM lifters and the solenoids that control them run on engine oil pressure. Keeping the oil at the right level, using the grade GM specifies on the oil filler cap or in the owner's manual, and changing it on schedule matters whether or not AFM is active. The module changes when cylinders deactivate; it does not change the oiling system.\u003c\/p\u003e\u003ch2\u003eCheck the engine first\u003c\/h2\u003e\u003cp\u003eScan for stored codes before you plug it in. Misfire codes on the deactivation cylinders, an AFM solenoid circuit code, or a lifter noise are signs of an existing problem that should be repaired first. The module is meant for a healthy engine where you simply do not want cylinder deactivation.\u003c\/p\u003e\u003ch2\u003eLiving with it\u003c\/h2\u003e\u003cp\u003eLeave it in the port for everyday driving. When the vehicle goes in for service or an emissions check, remove it so the shop has normal access to the diagnostic connector, then reinstall it.\u003c\/p\u003e\u003ch2\u003eReasons to keep all cylinders running\u003c\/h2\u003e\u003cp\u003eA Cadillac XTS with AFM switches modes many times on a typical drive. Some owners never notice; others feel it every time. If you are in the second group, or you tow and want steady behavior, keeping all cylinders active is the simplest answer. Fuel use at light cruise will usually rise a little, since that is where AFM saves fuel.\u003c\/p\u003e\u003ch2\u003eModule, tune or delete kit\u003c\/h2\u003e\u003cp\u003eOwners who want AFM gone for good sometimes go the mechanical route: non-AFM lifters, a matching camshaft and a retune. That is a large job and it is permanent. A tuner can also disable AFM in the engine computer. The plug-in module sits at the other end of the scale: no parts replaced, no software rewritten, and back to factory with one pull. It is meant for engines that run well and simply should not switch modes.\u003c\/p\u003e\u003ch2\u003eHow to confirm your engine code\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYour model year, model and engine match a row in the table (2013–2018 Cadillac XTS).\u003c\/li\u003e\n\u003cli\u003eFind your engine code. On GM vehicles before the 2018 model year, the Service Parts Identification label (usually inside the glovebox on these trucks and SUVs) lists the three-character RPO codes, and the engine code starts with L. From 2018, GM moved that data into a QR code on the certification label on the driver-side door pillar. The 8th character of the VIN also identifies the engine.\u003c\/li\u003e\n\u003cli\u003eThe engine runs cleanly with no stored misfire or AFM codes.\u003c\/li\u003e\n\u003cli\u003eIf the vehicle has an engine swap, an aftermarket tune or a replacement engine computer, contact support first.\u003c\/li\u003e\n\u003cli\u003eQuestions: support@automotivebypass.com with your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYear-by-year fitment\u003c\/h2\u003e\u003cp\u003eOne row per year. The last column shows which AFM-equipped GM engine codes match that year and engine size:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eAFM codes\u003c\/th\u003e\n\u003cth\u003eListing note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eXTS\u003c\/td\u003e\n\u003ctd\u003e3.6L V6\u003c\/td\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003ctd\u003e100% Fitment Match | OEM-Grade Quality | Plug \u0026amp; Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAfter-install checks\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWarning light appears:\u003c\/strong\u003e Remove the module, scan for codes and email support with the code and VIN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMode changes still felt:\u003c\/strong\u003e Re-seat the module and confirm your engine code is on the AFM list for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop cannot reach the diagnostic port:\u003c\/strong\u003e Unplug the module for the visit and refit it afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifter noise or misfire codes:\u003c\/strong\u003e These point to existing engine faults that need diagnosis and repair.\u003c\/p\u003e\u003ch2\u003eWhich 3.6L V6 engines have AFM\u003c\/h2\u003e\u003cp\u003eFor V6 applications, the engine code matters more than the displacement. AFM is part of the LGX (2016-on Camaro, which drops cylinders 2 and 5) and the LGZ (2017-on Colorado and Canyon). The LFX that preceded them, including in the 2015–2016 Colorado and Canyon, and the LFY in the 2018 Traverse and Enclave run on all six cylinders all the time and are not candidates for this module.\u003c\/p\u003e\u003ch2\u003eWhere AFM came from\u003c\/h2\u003e\u003cp\u003eCylinder deactivation at GM goes back to the 1981 Cadillac V8-6-4. The current approach began as Displacement on Demand, announced in 2003 for the 2005 TrailBlazer EXT, Envoy XL and Envoy XUV 5.3L, then the front-drive 5.3L LS4 cars. Under the Active Fuel Management name it became common on Gen IV and EcoTec3 truck V8s. The 2010 Camaro SS automatic got it on the L99. In 2019, Dynamic Fuel Management replaced it on the new Silverado and Sierra 1500 V8s.\u003c\/p\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScan the engine for stored codes and note any misfire or AFM solenoid codes.\u003c\/li\u003e\n\u003cli\u003eCheck the oil level and confirm the grade matches GM's specification for your engine.\u003c\/li\u003e\n\u003cli\u003eSwitch the ignition off before inserting the module.\u003c\/li\u003e\n\u003cli\u003eLocate the OBD-II port under the driver-side dash.\u003c\/li\u003e\n\u003cli\u003ePush the module in until it is fully seated and sits clear of your knee and the pedals.\u003c\/li\u003e\n\u003cli\u003eStart the engine and let it idle before driving.\u003c\/li\u003e\n\u003cli\u003eTake a drive at steady light throttle, where AFM used to engage, and confirm the engine stays on all cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy oil matters on these engines\u003c\/h2\u003e\u003cp\u003eInside the valley of an AFM V8 sits a solenoid assembly that feeds oil to two-stage hydraulic lifters on the cylinders that shut down. When a solenoid opens, the lifter collapses and the valve stays closed. The whole system depends on oil pressure, so oil grade, level and change intervals affect how it behaves. With the module installed, the switching no longer happens, but the lifters are still oil-fed and still need clean oil at the right pressure.\u003c\/p\u003e\u003ch2\u003eTerms used on this page\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPO code:\u003c\/strong\u003e GM's three-character option code; engine codes begin with L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDFM:\u003c\/strong\u003e Dynamic Fuel Management, the system on 2019-on L84 and L87 engines that can deactivate cylinders individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOBD-II port:\u003c\/strong\u003e The standard diagnostic connector under the dash on every US vehicle since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAFM:\u003c\/strong\u003e Active Fuel Management, GM's cylinder deactivation system on the engines covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVIN 8th digit:\u003c\/strong\u003e The VIN character that identifies the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPID label:\u003c\/strong\u003e Service Parts Identification label listing the RPO codes on pre-2018 GM vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoD:\u003c\/strong\u003e Displacement on Demand, the original name for AFM.\u003c\/p\u003e\u003ch2\u003eQuestions owners ask\u003c\/h2\u003e\u003ch3\u003eWill it add horsepower?\u003c\/h3\u003e\u003cp\u003eNo. It keeps all cylinders active; it does not change the engine tune.\u003c\/p\u003e\u003ch3\u003eDoes it plug into the OBD-II port on the Cadillac XTS?\u003c\/h3\u003e\u003cp\u003eYes. It plugs into the OBD-II port under the dash. There is no wiring or splicing.\u003c\/p\u003e\u003ch3\u003eWhich Cadillac XTS years and engines does it fit?\u003c\/h3\u003e\u003cp\u003eThe fitment table lists Cadillac XTS 2013–2018 with 3.6L V6. Match your exact year and engine to a row before ordering.\u003c\/p\u003e\u003ch3\u003eWill it fix lifter noise or misfires?\u003c\/h3\u003e\u003cp\u003eNo. Those are mechanical or electrical faults that need their own diagnosis and repair.\u003c\/p\u003e\u003ch3\u003eCan I go back to factory AFM?\u003c\/h3\u003e\u003cp\u003eYes. Unplug the module and the factory cylinder-deactivation strategy works again.\u003c\/p\u003e\u003ch3\u003eIs a tune or ECU reflash required?\u003c\/h3\u003e\u003cp\u003eNo. The module plugs into the OBD-II port and does not rewrite the engine computer's software.\u003c\/p\u003e\u003ch3\u003eHow do I tell which engine my Cadillac XTS has?\u003c\/h3\u003e\u003cp\u003eCheck the 8th digit of the VIN or the RPO codes on the Service Parts Identification label (QR code on the door-pillar label on 2018 and newer GM models).\u003c\/p\u003e\u003ch3\u003eHow much fuel does AFM save?\u003c\/h3\u003e\u003cp\u003eEPA-test estimates published for GM's system are about 5.5–7.5%, with the benefit coming from light-load cruising. Keeping all cylinders active gives up part of that, depending on how you drive.\u003c\/p\u003e\u003ch3\u003eDo I need to remove it for an emissions test or scan tool?\u003c\/h3\u003e\u003cp\u003eYes. It uses the diagnostic port, so unplug it while the port is needed and plug it back in afterwards.\u003c\/p\u003e\u003ch3\u003eDoes it work on 2019 and newer trucks with Dynamic Fuel Management?\u003c\/h3\u003e\u003cp\u003eOnly the vehicles and engines in this listing's fitment table are covered. DFM on the 2019-on Silverado 1500 and Sierra 1500 (5.3L L84, 6.2L L87) is a different system, so do not assume coverage outside the table.\u003c\/p\u003e\u003ch3\u003eDo I need it if my engine already has an AFM delete?\u003c\/h3\u003e\u003cp\u003eNo. An engine with the AFM hardware removed and a matching tune no longer deactivates cylinders, so the module has nothing to manage.\u003c\/p\u003e\u003ch3\u003eDoes it change anything when towing?\u003c\/h3\u003e\u003cp\u003eUnder heavy load, such as towing up a grade, AFM already keeps all cylinders running. The difference shows up during lighter cruising between climbs, where the engine no longer drops cylinders.\u003c\/p\u003e\u003ch2\u003eShipping and support\u003c\/h2\u003e\u003cp\u003eStandard shipping inside the lower 48 states costs nothing; allow 1–2 business days of handling plus 3–4 in transit. Returns need approval first and must be requested within 45 days. Approved returns are subject to a 20% restocking fee, with return shipping paid by the customer. A 3-year limited warranty applies. Email support@automotivebypass.com (Mon–Fri, 9–5 PST) with your VIN if you want a fitment check.\u003c\/p\u003e","brand":"Automotivebypass","offers":[{"title":"Default Title","offer_id":56493785874804,"sku":"RC-AFM-DFM-01-34","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/8439\/2820\/files\/RC-AFM-DFM-01-34-1.jpg?v=1793172514","url":"https:\/\/automotivebypass.com\/products\/cadillac-xts-2013-2018-36l-v6-afm-dfm-disabler","provider":"Automotivebypass","version":"1.0","type":"link"}